OEM#: BE650G1New OEM Original Outright
APC BACK-UPS 650, 8 OUTLET by APC / American Power Conversion
Your price:
$162.65 each
View All
OEM#: BE650G1APC BACK-UPS 650, 8 OUTLET by APC / American Power Conversion
New OEM Original Outright
Your price:
$162.65 each
Asset Information
Are you an existing customer? Sign in to access your account.
ADD TO LIST
Product Overview
Building Wiring Fault Indicator
- This LED informs users of potentially dangerous wiring problems in the wall circuit
Cold-Start Capable
- Provides temporary battery power when the utility power is out
Dataline Surge Protection
- Provides protection of connected equipment from power surges on the data lines
Disconnected Battery Notification
- Warns when a battery is not available to provide backup power
Hot-Swappable Batteries
- Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Lifetime Data Recovery Warranty
- Provides peace of mind by providing professional data recovery services in the event data is lost due to the failure of the unit
Simple Battery Replacement
- Increases UPS availability by allowing quick, easy battery replacement
Transformer-Block Spaced Outlets
- Protect equipment with input transformer blocks without blocking access to other receptacles
USB Connection
- Use your PC to access additional power protection and management features for your UPS via a USB Port
Safety-Agency Approved
- Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment
Battery and Surge Protected Outlets
- Back up and protect your hardware and data during power outages, surges and spikes
Surge Only Outlets
- Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage
Battery-Protected and Surge-Only Outlets
- Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
LED Status Display
- Quickly understand unit and power status with visual indicators
Audible Alarms
- Provides notification of changing utility power and UPS power conditions
Automatic Self-Test
- Periodic battery self-test ensures early detection of a battery that needs to be replaced
Intelligent Battery Management
- Maximizes battery performance, life, and reliability through intelligent, precision charging
Battery Failure Notification
- Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Features
- Energy-efficient design.
- Data line surge protection.
- Four stage LED status display.
- Audible alarms.
- Transformer-block spaced outlets.
Technical Specs
P/N: BE650G1 Key Specs
Item
APC BACK-UPS 650, 8 OUTLET
OEM
APC / American Power Conversion
OEM #
BE650G1
Condition
New OEM Original
Returnable
No
Warranty
Mfr Warranty
Alarm(s)
Audible
Automatic Voltage Regulation (AVR)
Yes
Backup Time at Full Load
3.8 min @ 390 W
Backup Time at Half Load
13.4 min @ 195 W
Battery Recharge Time
16 h
Color(s)
Charcoal
Compliance Standards
Conforms to UL 1449 Standards; Conforms to UL 1778 Standards; FCC Class B Certified; FCC Part 68 Certified; TUV SUD Certified
Connector/Port/Interface
Coaxial; RJ11; RJ45; USB
Cord Length
6 ft
Depth
7"
Diagnostics/Alarm/Status Light
Alarm; LED
Disclaimer Statement
Run Time based on a load of 195 W.
Emergency Power Off (EPO)
No
Height
3.6"
Input Frequency
60 Hz
Jacks
RJ11
Joules Of Surge Protection
340 J
Lines
1
Model Name/Number
Back-UPS ES 650
Multimedia Protection
Ethernet/Telephone/Modem
Number of Outlets
8
Number of Outlets/Type
4 UPS/Surge; 4 Surge Only
Post-Consumer Recycled Content Percent
0%
Pre-Consumer Recycled Content Percent
0%
Protection Type
Cable Modem; DSL; Ethernet; Fax; Modem; Phone; Power
React Time
Instantaneous
Run Time
13 min
Special Features
Includes PowerChute Auto-Shutdown Software
System VA
650 VA
Telephone/Internet Protection
Cable; DSL; Ethernet; Fax; Phone
Total Recycled Content Percent
0%
Weight
14.3 lbs
Width
12.6"
Building Wiring Fault Indicator
- This LED informs users of potentially dangerous wiring problems in the wall circuit
Cold-Start Capable
- Provides temporary battery power when the utility power is out
Dataline Surge Protection
- Provides protection of connected equipment from power surges on the data lines
Disconnected Battery Notification
- Warns when a battery is not available to provide backup power
Hot-Swappable Batteries
- Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Lifetime Data Recovery Warranty
- Provides peace of mind by providing professional data recovery services in the event data is lost due to the failure of the unit
Simple Battery Replacement
- Increases UPS availability by allowing quick, easy battery replacement
Transformer-Block Spaced Outlets
- Protect equipment with input transformer blocks without blocking access to other receptacles
USB Connection
- Use your PC to access additional power protection and management features for your UPS via a USB Port
Safety-Agency Approved
- Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment
Battery and Surge Protected Outlets
- Back up and protect your hardware and data during power outages, surges and spikes
Surge Only Outlets
- Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage
Battery-Protected and Surge-Only Outlets
- Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
LED Status Display
- Quickly understand unit and power status with visual indicators
Audible Alarms
- Provides notification of changing utility power and UPS power conditions
Automatic Self-Test
- Periodic battery self-test ensures early detection of a battery that needs to be replaced
Intelligent Battery Management
- Maximizes battery performance, life, and reliability through intelligent, precision charging
Battery Failure Notification
- Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Product Overview
Building Wiring Fault Indicator
- This LED informs users of potentially dangerous wiring problems in the wall circuit
Cold-Start Capable
- Provides temporary battery power when the utility power is out
Dataline Surge Protection
- Provides protection of connected equipment from power surges on the data lines
Disconnected Battery Notification
- Warns when a battery is not available to provide backup power
Hot-Swappable Batteries
- Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Lifetime Data Recovery Warranty
- Provides peace of mind by providing professional data recovery services in the event data is lost due to the failure of the unit
Simple Battery Replacement
- Increases UPS availability by allowing quick, easy battery replacement
Transformer-Block Spaced Outlets
- Protect equipment with input transformer blocks without blocking access to other receptacles
USB Connection
- Use your PC to access additional power protection and management features for your UPS via a USB Port
Safety-Agency Approved
- Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment
Battery and Surge Protected Outlets
- Back up and protect your hardware and data during power outages, surges and spikes
Surge Only Outlets
- Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage
Battery-Protected and Surge-Only Outlets
- Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
LED Status Display
- Quickly understand unit and power status with visual indicators
Audible Alarms
- Provides notification of changing utility power and UPS power conditions
Automatic Self-Test
- Periodic battery self-test ensures early detection of a battery that needs to be replaced
Intelligent Battery Management
- Maximizes battery performance, life, and reliability through intelligent, precision charging
Battery Failure Notification
- Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Features
- Energy-efficient design.
- Data line surge protection.
- Four stage LED status display.
- Audible alarms.
- Transformer-block spaced outlets.
Technical Specs
P/N: BE650G1 Key Specs
Item
APC BACK-UPS 650, 8 OUTLET
OEM
APC / American Power Conversion
OEM #
BE650G1
Condition
New OEM Original
Returnable
No
Warranty
Mfr Warranty
Alarm(s)
Audible
Automatic Voltage Regulation (AVR)
Yes
Backup Time at Full Load
3.8 min @ 390 W
Backup Time at Half Load
13.4 min @ 195 W
Battery Recharge Time
16 h
Color(s)
Charcoal
Compliance Standards
Conforms to UL 1449 Standards; Conforms to UL 1778 Standards; FCC Class B Certified; FCC Part 68 Certified; TUV SUD Certified
Connector/Port/Interface
Coaxial; RJ11; RJ45; USB
Cord Length
6 ft
Depth
7"
Diagnostics/Alarm/Status Light
Alarm; LED
Disclaimer Statement
Run Time based on a load of 195 W.
Emergency Power Off (EPO)
No
Height
3.6"
Input Frequency
60 Hz
Jacks
RJ11
Joules Of Surge Protection
340 J
Lines
1
Model Name/Number
Back-UPS ES 650
Multimedia Protection
Ethernet/Telephone/Modem
Number of Outlets
8
Number of Outlets/Type
4 UPS/Surge; 4 Surge Only
Post-Consumer Recycled Content Percent
0%
Pre-Consumer Recycled Content Percent
0%
Protection Type
Cable Modem; DSL; Ethernet; Fax; Modem; Phone; Power
React Time
Instantaneous
Run Time
13 min
Special Features
Includes PowerChute Auto-Shutdown Software
System VA
650 VA
Telephone/Internet Protection
Cable; DSL; Ethernet; Fax; Phone
Total Recycled Content Percent
0%
Weight
14.3 lbs
Width
12.6"
Building Wiring Fault Indicator
- This LED informs users of potentially dangerous wiring problems in the wall circuit
Cold-Start Capable
- Provides temporary battery power when the utility power is out
Dataline Surge Protection
- Provides protection of connected equipment from power surges on the data lines
Disconnected Battery Notification
- Warns when a battery is not available to provide backup power
Hot-Swappable Batteries
- Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Lifetime Data Recovery Warranty
- Provides peace of mind by providing professional data recovery services in the event data is lost due to the failure of the unit
Simple Battery Replacement
- Increases UPS availability by allowing quick, easy battery replacement
Transformer-Block Spaced Outlets
- Protect equipment with input transformer blocks without blocking access to other receptacles
USB Connection
- Use your PC to access additional power protection and management features for your UPS via a USB Port
Safety-Agency Approved
- Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment
Battery and Surge Protected Outlets
- Back up and protect your hardware and data during power outages, surges and spikes
Surge Only Outlets
- Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage
Battery-Protected and Surge-Only Outlets
- Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
LED Status Display
- Quickly understand unit and power status with visual indicators
Audible Alarms
- Provides notification of changing utility power and UPS power conditions
Automatic Self-Test
- Periodic battery self-test ensures early detection of a battery that needs to be replaced
Intelligent Battery Management
- Maximizes battery performance, life, and reliability through intelligent, precision charging
Battery Failure Notification
- Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Product Overview
Building Wiring Fault Indicator
- This LED informs users of potentially dangerous wiring problems in the wall circuit
Cold-Start Capable
- Provides temporary battery power when the utility power is out
Dataline Surge Protection
- Provides protection of connected equipment from power surges on the data lines
Disconnected Battery Notification
- Warns when a battery is not available to provide backup power
Hot-Swappable Batteries
- Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Lifetime Data Recovery Warranty
- Provides peace of mind by providing professional data recovery services in the event data is lost due to the failure of the unit
Simple Battery Replacement
- Increases UPS availability by allowing quick, easy battery replacement
Transformer-Block Spaced Outlets
- Protect equipment with input transformer blocks without blocking access to other receptacles
USB Connection
- Use your PC to access additional power protection and management features for your UPS via a USB Port
Safety-Agency Approved
- Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment
Battery and Surge Protected Outlets
- Back up and protect your hardware and data during power outages, surges and spikes
Surge Only Outlets
- Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage
Battery-Protected and Surge-Only Outlets
- Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
LED Status Display
- Quickly understand unit and power status with visual indicators
Audible Alarms
- Provides notification of changing utility power and UPS power conditions
Automatic Self-Test
- Periodic battery self-test ensures early detection of a battery that needs to be replaced
Intelligent Battery Management
- Maximizes battery performance, life, and reliability through intelligent, precision charging
Battery Failure Notification
- Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Features
- Energy-efficient design.
- Data line surge protection.
- Four stage LED status display.
- Audible alarms.
- Transformer-block spaced outlets.
Technical Specs
P/N: BE650G1 Key Specs
Item
APC BACK-UPS 650, 8 OUTLET
OEM
APC / American Power Conversion
OEM #
BE650G1
Condition
New OEM Original
Returnable
No
Warranty
Mfr Warranty
Alarm(s)
Audible
Automatic Voltage Regulation (AVR)
Yes
Backup Time at Full Load
3.8 min @ 390 W
Backup Time at Half Load
13.4 min @ 195 W
Battery Recharge Time
16 h
Color(s)
Charcoal
Compliance Standards
Conforms to UL 1449 Standards; Conforms to UL 1778 Standards; FCC Class B Certified; FCC Part 68 Certified; TUV SUD Certified
Connector/Port/Interface
Coaxial; RJ11; RJ45; USB
Cord Length
6 ft
Depth
7"
Diagnostics/Alarm/Status Light
Alarm; LED
Disclaimer Statement
Run Time based on a load of 195 W.
Emergency Power Off (EPO)
No
Height
3.6"
Input Frequency
60 Hz
Jacks
RJ11
Joules Of Surge Protection
340 J
Lines
1
Model Name/Number
Back-UPS ES 650
Multimedia Protection
Ethernet/Telephone/Modem
Number of Outlets
8
Number of Outlets/Type
4 UPS/Surge; 4 Surge Only
Post-Consumer Recycled Content Percent
0%
Pre-Consumer Recycled Content Percent
0%
Protection Type
Cable Modem; DSL; Ethernet; Fax; Modem; Phone; Power
React Time
Instantaneous
Run Time
13 min
Special Features
Includes PowerChute Auto-Shutdown Software
System VA
650 VA
Telephone/Internet Protection
Cable; DSL; Ethernet; Fax; Phone
Total Recycled Content Percent
0%
Weight
14.3 lbs
Width
12.6"
Building Wiring Fault Indicator
- This LED informs users of potentially dangerous wiring problems in the wall circuit
Cold-Start Capable
- Provides temporary battery power when the utility power is out
Dataline Surge Protection
- Provides protection of connected equipment from power surges on the data lines
Disconnected Battery Notification
- Warns when a battery is not available to provide backup power
Hot-Swappable Batteries
- Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Lifetime Data Recovery Warranty
- Provides peace of mind by providing professional data recovery services in the event data is lost due to the failure of the unit
Simple Battery Replacement
- Increases UPS availability by allowing quick, easy battery replacement
Transformer-Block Spaced Outlets
- Protect equipment with input transformer blocks without blocking access to other receptacles
USB Connection
- Use your PC to access additional power protection and management features for your UPS via a USB Port
Safety-Agency Approved
- Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment
Battery and Surge Protected Outlets
- Back up and protect your hardware and data during power outages, surges and spikes
Surge Only Outlets
- Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage
Battery-Protected and Surge-Only Outlets
- Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
LED Status Display
- Quickly understand unit and power status with visual indicators
Audible Alarms
- Provides notification of changing utility power and UPS power conditions
Automatic Self-Test
- Periodic battery self-test ensures early detection of a battery that needs to be replaced
Intelligent Battery Management
- Maximizes battery performance, life, and reliability through intelligent, precision charging
Battery Failure Notification
- Provides early-warning fault analysis on batteries enabling timely preventive maintenance