OEM#: 4285New OEM Original Outright
SLIDE HAMMER PULLER, 6 TON CAPACITY by Urrea Professional Tools
Your price:
$174.36 each
OEM#: 4285SLIDE HAMMER PULLER, 6 TON CAPACITY by Urrea Professional Tools
New OEM Original Outright
Your price:
$174.36 each
Asset Information
Are you an existing customer? Sign in to access your account.
ADD TO LIST
Product Overview
Urrea Slide Hammer Puller 4285, 6 Ton Capacity
Their design is ideal for removing bearings, bushings, sprockets, grease retainers, seals, gears, and bearing covers. Their jaws can be positioned either "internally" or "externally", pulling with 2 or 3 jaws. Their adjusting cone applies constant pressure on all jaws. T-handle provides better control. Micro-alloy steel shaft, heat-treated and checked so the hammer slides smoothly and strongly. Sliding hammer extracts by blows delivered to the adjusting cone. Micro-alloy steel jaws are heat treated for greater resistance to traction. Adjusting cone applies constant pressure.
Their design is ideal for removing bearings, bushings, sprockets, grease retainers, seals, gears, and bearing covers. Their jaws can be positioned either "internally" or "externally", pulling with 2 or 3 jaws. Their adjusting cone applies constant pressure on all jaws. T-handle provides better control. Micro-alloy steel shaft, heat-treated and checked so the hammer slides smoothly and strongly. Sliding hammer extracts by blows delivered to the adjusting cone. Micro-alloy steel jaws are heat treated for greater resistance to traction. Adjusting cone applies constant pressure.
Technical Specs
P/N: 4285 Key Specs
Item
SLIDE HAMMER PULLER, 6 TON CAPACITY
OEM
Urrea Professional Tools
OEM #
4285
Condition
New OEM Original
Returnable
No
Warranty
Mfr Warranty
Approval(S)
FEDERAL GGG-P-781
Capacity Tons
6 Tons
Country of Origin
Taiwan
External Capacity(Max)
5-1/2" - 5-5/16"
External Capacity(Min)
1-31/32"- 25/32"
Hammer Weight
5 LB
Internal Capacity(Max)
4-5/16" - 5-5/16"
Internal Capacity(Min)
1-3/8" - 1-31/32"
Number Of Jaws
2 or 3
Reach
2-15/16" - 2-15/16" (Toe)
Shaft Length
22-7/16"- 22-7/16"
Urrea Slide Hammer Puller 4285, 6 Ton Capacity
Their design is ideal for removing bearings, bushings, sprockets, grease retainers, seals, gears, and bearing covers. Their jaws can be positioned either "internally" or "externally", pulling with 2 or 3 jaws. Their adjusting cone applies constant pressure on all jaws. T-handle provides better control. Micro-alloy steel shaft, heat-treated and checked so the hammer slides smoothly and strongly. Sliding hammer extracts by blows delivered to the adjusting cone. Micro-alloy steel jaws are heat treated for greater resistance to traction. Adjusting cone applies constant pressure.
Their design is ideal for removing bearings, bushings, sprockets, grease retainers, seals, gears, and bearing covers. Their jaws can be positioned either "internally" or "externally", pulling with 2 or 3 jaws. Their adjusting cone applies constant pressure on all jaws. T-handle provides better control. Micro-alloy steel shaft, heat-treated and checked so the hammer slides smoothly and strongly. Sliding hammer extracts by blows delivered to the adjusting cone. Micro-alloy steel jaws are heat treated for greater resistance to traction. Adjusting cone applies constant pressure.
Product Overview
Urrea Slide Hammer Puller 4285, 6 Ton Capacity
Their design is ideal for removing bearings, bushings, sprockets, grease retainers, seals, gears, and bearing covers. Their jaws can be positioned either "internally" or "externally", pulling with 2 or 3 jaws. Their adjusting cone applies constant pressure on all jaws. T-handle provides better control. Micro-alloy steel shaft, heat-treated and checked so the hammer slides smoothly and strongly. Sliding hammer extracts by blows delivered to the adjusting cone. Micro-alloy steel jaws are heat treated for greater resistance to traction. Adjusting cone applies constant pressure.
Their design is ideal for removing bearings, bushings, sprockets, grease retainers, seals, gears, and bearing covers. Their jaws can be positioned either "internally" or "externally", pulling with 2 or 3 jaws. Their adjusting cone applies constant pressure on all jaws. T-handle provides better control. Micro-alloy steel shaft, heat-treated and checked so the hammer slides smoothly and strongly. Sliding hammer extracts by blows delivered to the adjusting cone. Micro-alloy steel jaws are heat treated for greater resistance to traction. Adjusting cone applies constant pressure.
Technical Specs
P/N: 4285 Key Specs
Item
SLIDE HAMMER PULLER, 6 TON CAPACITY
OEM
Urrea Professional Tools
OEM #
4285
Condition
New OEM Original
Returnable
No
Warranty
Mfr Warranty
Approval(S)
FEDERAL GGG-P-781
Capacity Tons
6 Tons
Country of Origin
Taiwan
External Capacity(Max)
5-1/2" - 5-5/16"
External Capacity(Min)
1-31/32"- 25/32"
Hammer Weight
5 LB
Internal Capacity(Max)
4-5/16" - 5-5/16"
Internal Capacity(Min)
1-3/8" - 1-31/32"
Number Of Jaws
2 or 3
Reach
2-15/16" - 2-15/16" (Toe)
Shaft Length
22-7/16"- 22-7/16"
Urrea Slide Hammer Puller 4285, 6 Ton Capacity
Their design is ideal for removing bearings, bushings, sprockets, grease retainers, seals, gears, and bearing covers. Their jaws can be positioned either "internally" or "externally", pulling with 2 or 3 jaws. Their adjusting cone applies constant pressure on all jaws. T-handle provides better control. Micro-alloy steel shaft, heat-treated and checked so the hammer slides smoothly and strongly. Sliding hammer extracts by blows delivered to the adjusting cone. Micro-alloy steel jaws are heat treated for greater resistance to traction. Adjusting cone applies constant pressure.
Their design is ideal for removing bearings, bushings, sprockets, grease retainers, seals, gears, and bearing covers. Their jaws can be positioned either "internally" or "externally", pulling with 2 or 3 jaws. Their adjusting cone applies constant pressure on all jaws. T-handle provides better control. Micro-alloy steel shaft, heat-treated and checked so the hammer slides smoothly and strongly. Sliding hammer extracts by blows delivered to the adjusting cone. Micro-alloy steel jaws are heat treated for greater resistance to traction. Adjusting cone applies constant pressure.
Product Overview
Urrea Slide Hammer Puller 4285, 6 Ton Capacity
Their design is ideal for removing bearings, bushings, sprockets, grease retainers, seals, gears, and bearing covers. Their jaws can be positioned either "internally" or "externally", pulling with 2 or 3 jaws. Their adjusting cone applies constant pressure on all jaws. T-handle provides better control. Micro-alloy steel shaft, heat-treated and checked so the hammer slides smoothly and strongly. Sliding hammer extracts by blows delivered to the adjusting cone. Micro-alloy steel jaws are heat treated for greater resistance to traction. Adjusting cone applies constant pressure.
Their design is ideal for removing bearings, bushings, sprockets, grease retainers, seals, gears, and bearing covers. Their jaws can be positioned either "internally" or "externally", pulling with 2 or 3 jaws. Their adjusting cone applies constant pressure on all jaws. T-handle provides better control. Micro-alloy steel shaft, heat-treated and checked so the hammer slides smoothly and strongly. Sliding hammer extracts by blows delivered to the adjusting cone. Micro-alloy steel jaws are heat treated for greater resistance to traction. Adjusting cone applies constant pressure.
Technical Specs
P/N: 4285 Key Specs
Item
SLIDE HAMMER PULLER, 6 TON CAPACITY
OEM
Urrea Professional Tools
OEM #
4285
Condition
New OEM Original
Returnable
No
Warranty
Mfr Warranty
Approval(S)
FEDERAL GGG-P-781
Capacity Tons
6 Tons
Country of Origin
Taiwan
External Capacity(Max)
5-1/2" - 5-5/16"
External Capacity(Min)
1-31/32"- 25/32"
Hammer Weight
5 LB
Internal Capacity(Max)
4-5/16" - 5-5/16"
Internal Capacity(Min)
1-3/8" - 1-31/32"
Number Of Jaws
2 or 3
Reach
2-15/16" - 2-15/16" (Toe)
Shaft Length
22-7/16"- 22-7/16"
Urrea Slide Hammer Puller 4285, 6 Ton Capacity
Their design is ideal for removing bearings, bushings, sprockets, grease retainers, seals, gears, and bearing covers. Their jaws can be positioned either "internally" or "externally", pulling with 2 or 3 jaws. Their adjusting cone applies constant pressure on all jaws. T-handle provides better control. Micro-alloy steel shaft, heat-treated and checked so the hammer slides smoothly and strongly. Sliding hammer extracts by blows delivered to the adjusting cone. Micro-alloy steel jaws are heat treated for greater resistance to traction. Adjusting cone applies constant pressure.
Their design is ideal for removing bearings, bushings, sprockets, grease retainers, seals, gears, and bearing covers. Their jaws can be positioned either "internally" or "externally", pulling with 2 or 3 jaws. Their adjusting cone applies constant pressure on all jaws. T-handle provides better control. Micro-alloy steel shaft, heat-treated and checked so the hammer slides smoothly and strongly. Sliding hammer extracts by blows delivered to the adjusting cone. Micro-alloy steel jaws are heat treated for greater resistance to traction. Adjusting cone applies constant pressure.