OEM#: N280-01M-GNNew OEM Original Outright
1M SFP+ 10GBASE-CU PASSIVE TWINAX COPPER CABLE GREEN 3FT by Tripp Lite
Your price:
$56.03 each $97.03 Savings: $41.00 (42%)
OEM#: N280-01M-GN1M SFP+ 10GBASE-CU PASSIVE TWINAX COPPER CABLE GREEN 3FT by Tripp Lite
New OEM Original Outright
Your price:
$56.03 each
$97.03 Savings: $41.00 (42%)
SFP+ 10Gbase-CU Passive Twinax Copper Cable, SFP-H10GB-CU1M Compatible, Green, 1M (3-ft.)
Asset Information
1-Year Limited Warranty
Are you an existing customer? Sign in to access your account.
ADD TO LIST
Product Overview
Tripp Lite's Small Form Factor Pluggable ( SFP+ ) passive copper cables are a high performance connectivity solution supporting 10Gbps Ethernet and Fibre Channel applications. Constructed with 24AWG to 30AWG (depending on length), 100ohm Twinaxial cable, Tripp Lite cables exceed the specs on most OEM cables, at a fraction of the cost. SFP+ cables were developed as cost effective, low power alternatives to fiber optic cables, in high speed interconnect applications, such as network storage and enterprise networking. See "Features" tab for additional compatibility information.
- System Requirements:
Tripp Lite SFP+ Direct Attach Cable ( DAC ) Twinaxial cables conform to SFF-8431 standards, and as such can be used with the following manufacturers equipment that are open to 3rd party cables:QLOGIC * EMULEX * JUNIPER * ARISTA * IBM * DELL * EXTREMEEMC * BROADCOM * FINISAR * VOLTAIRE * CISCOCONFIRMED EQUIPMENT LIST ( *ensure the latest firmware and software is installed )CISCO NEXUS *CISCO CATALYST *CISCO CATALYST 3750xCISCO CATALYST 2960CISCO CATALYST 3500CISCO CATALYST 3550CISCO NEXUS 5010ARISTA 70505-64QUANTA T3048EXTREME X250EJUNIPER EX3200NOT COMPATIBLE TO 3RD PARTY CABLES: HP and BROCADE
- Package Includes:
• 1 m. (3 ft.) Green 30Awg SFP+ High Speed Passive Copper 10Gbps Cable
Features
- 1 m. (3 ft.) Green 30AWG SFP+ High Speed Passive Copper 10Gbps Cable
- Equivalent to Cisco SFP-H10GB-CU1M
- Fully compliant to MSA SFF-8431 specification
- Low Cost alternative to Fiber Optic
Technical Specs
P/N: N280-01M-GN Key Specs
Item
1M SFP+ 10GBASE-CU PASSIVE TWINAX COPPER CABLE GREEN 3FT
OEM
Tripp Lite
OEM #
N280-01M-GN
Condition
New OEM Original
Returnable
No
Warranty
Other (See Notes)
Color
Green
Connector
SFP+ - male
Connector (Second End)
SFP+ - male
Length
3.3 ft
Type
Direct attach cable
Equivalents
Tripp Lite's Small Form Factor Pluggable ( SFP+ ) passive copper cables are a high performance connectivity solution supporting 10Gbps Ethernet and Fibre Channel applications. Constructed with 24AWG to 30AWG (depending on length), 100ohm Twinaxial cable, Tripp Lite cables exceed the specs on most OEM cables, at a fraction of the cost. SFP+ cables were developed as cost effective, low power alternatives to fiber optic cables, in high speed interconnect applications, such as network storage and enterprise networking. See "Features" tab for additional compatibility information.
- System Requirements:
Tripp Lite SFP+ Direct Attach Cable ( DAC ) Twinaxial cables conform to SFF-8431 standards, and as such can be used with the following manufacturers equipment that are open to 3rd party cables:QLOGIC * EMULEX * JUNIPER * ARISTA * IBM * DELL * EXTREMEEMC * BROADCOM * FINISAR * VOLTAIRE * CISCOCONFIRMED EQUIPMENT LIST ( *ensure the latest firmware and software is installed )CISCO NEXUS *CISCO CATALYST *CISCO CATALYST 3750xCISCO CATALYST 2960CISCO CATALYST 3500CISCO CATALYST 3550CISCO NEXUS 5010ARISTA 70505-64QUANTA T3048EXTREME X250EJUNIPER EX3200NOT COMPATIBLE TO 3RD PARTY CABLES: HP and BROCADE
- Package Includes:
• 1 m. (3 ft.) Green 30Awg SFP+ High Speed Passive Copper 10Gbps Cable
- N280-01M-GN: Eaton Corporation: OEM Acquisition
Product Overview
Tripp Lite's Small Form Factor Pluggable ( SFP+ ) passive copper cables are a high performance connectivity solution supporting 10Gbps Ethernet and Fibre Channel applications. Constructed with 24AWG to 30AWG (depending on length), 100ohm Twinaxial cable, Tripp Lite cables exceed the specs on most OEM cables, at a fraction of the cost. SFP+ cables were developed as cost effective, low power alternatives to fiber optic cables, in high speed interconnect applications, such as network storage and enterprise networking. See "Features" tab for additional compatibility information.
- System Requirements:
Tripp Lite SFP+ Direct Attach Cable ( DAC ) Twinaxial cables conform to SFF-8431 standards, and as such can be used with the following manufacturers equipment that are open to 3rd party cables:QLOGIC * EMULEX * JUNIPER * ARISTA * IBM * DELL * EXTREMEEMC * BROADCOM * FINISAR * VOLTAIRE * CISCOCONFIRMED EQUIPMENT LIST ( *ensure the latest firmware and software is installed )CISCO NEXUS *CISCO CATALYST *CISCO CATALYST 3750xCISCO CATALYST 2960CISCO CATALYST 3500CISCO CATALYST 3550CISCO NEXUS 5010ARISTA 70505-64QUANTA T3048EXTREME X250EJUNIPER EX3200NOT COMPATIBLE TO 3RD PARTY CABLES: HP and BROCADE
- Package Includes:
• 1 m. (3 ft.) Green 30Awg SFP+ High Speed Passive Copper 10Gbps Cable
Features
- 1 m. (3 ft.) Green 30AWG SFP+ High Speed Passive Copper 10Gbps Cable
- Equivalent to Cisco SFP-H10GB-CU1M
- Fully compliant to MSA SFF-8431 specification
- Low Cost alternative to Fiber Optic
Technical Specs
P/N: N280-01M-GN Key Specs
Item
1M SFP+ 10GBASE-CU PASSIVE TWINAX COPPER CABLE GREEN 3FT
OEM
Tripp Lite
OEM #
N280-01M-GN
Condition
New OEM Original
Returnable
No
Warranty
Other (See Notes)
Color
Green
Connector
SFP+ - male
Connector (Second End)
SFP+ - male
Length
3.3 ft
Type
Direct attach cable
Equivalents
Tripp Lite's Small Form Factor Pluggable ( SFP+ ) passive copper cables are a high performance connectivity solution supporting 10Gbps Ethernet and Fibre Channel applications. Constructed with 24AWG to 30AWG (depending on length), 100ohm Twinaxial cable, Tripp Lite cables exceed the specs on most OEM cables, at a fraction of the cost. SFP+ cables were developed as cost effective, low power alternatives to fiber optic cables, in high speed interconnect applications, such as network storage and enterprise networking. See "Features" tab for additional compatibility information.
- System Requirements:
Tripp Lite SFP+ Direct Attach Cable ( DAC ) Twinaxial cables conform to SFF-8431 standards, and as such can be used with the following manufacturers equipment that are open to 3rd party cables:QLOGIC * EMULEX * JUNIPER * ARISTA * IBM * DELL * EXTREMEEMC * BROADCOM * FINISAR * VOLTAIRE * CISCOCONFIRMED EQUIPMENT LIST ( *ensure the latest firmware and software is installed )CISCO NEXUS *CISCO CATALYST *CISCO CATALYST 3750xCISCO CATALYST 2960CISCO CATALYST 3500CISCO CATALYST 3550CISCO NEXUS 5010ARISTA 70505-64QUANTA T3048EXTREME X250EJUNIPER EX3200NOT COMPATIBLE TO 3RD PARTY CABLES: HP and BROCADE
- Package Includes:
• 1 m. (3 ft.) Green 30Awg SFP+ High Speed Passive Copper 10Gbps Cable
- N280-01M-GN: Eaton Corporation: OEM Acquisition
Product Overview
Tripp Lite's Small Form Factor Pluggable ( SFP+ ) passive copper cables are a high performance connectivity solution supporting 10Gbps Ethernet and Fibre Channel applications. Constructed with 24AWG to 30AWG (depending on length), 100ohm Twinaxial cable, Tripp Lite cables exceed the specs on most OEM cables, at a fraction of the cost. SFP+ cables were developed as cost effective, low power alternatives to fiber optic cables, in high speed interconnect applications, such as network storage and enterprise networking. See "Features" tab for additional compatibility information.
- System Requirements:
Tripp Lite SFP+ Direct Attach Cable ( DAC ) Twinaxial cables conform to SFF-8431 standards, and as such can be used with the following manufacturers equipment that are open to 3rd party cables:QLOGIC * EMULEX * JUNIPER * ARISTA * IBM * DELL * EXTREMEEMC * BROADCOM * FINISAR * VOLTAIRE * CISCOCONFIRMED EQUIPMENT LIST ( *ensure the latest firmware and software is installed )CISCO NEXUS *CISCO CATALYST *CISCO CATALYST 3750xCISCO CATALYST 2960CISCO CATALYST 3500CISCO CATALYST 3550CISCO NEXUS 5010ARISTA 70505-64QUANTA T3048EXTREME X250EJUNIPER EX3200NOT COMPATIBLE TO 3RD PARTY CABLES: HP and BROCADE
- Package Includes:
• 1 m. (3 ft.) Green 30Awg SFP+ High Speed Passive Copper 10Gbps Cable
Features
- 1 m. (3 ft.) Green 30AWG SFP+ High Speed Passive Copper 10Gbps Cable
- Equivalent to Cisco SFP-H10GB-CU1M
- Fully compliant to MSA SFF-8431 specification
- Low Cost alternative to Fiber Optic
Technical Specs
P/N: N280-01M-GN Key Specs
Item
1M SFP+ 10GBASE-CU PASSIVE TWINAX COPPER CABLE GREEN 3FT
OEM
Tripp Lite
OEM #
N280-01M-GN
Condition
New OEM Original
Returnable
No
Warranty
Other (See Notes)
Color
Green
Connector
SFP+ - male
Connector (Second End)
SFP+ - male
Length
3.3 ft
Type
Direct attach cable
Equivalents
Tripp Lite's Small Form Factor Pluggable ( SFP+ ) passive copper cables are a high performance connectivity solution supporting 10Gbps Ethernet and Fibre Channel applications. Constructed with 24AWG to 30AWG (depending on length), 100ohm Twinaxial cable, Tripp Lite cables exceed the specs on most OEM cables, at a fraction of the cost. SFP+ cables were developed as cost effective, low power alternatives to fiber optic cables, in high speed interconnect applications, such as network storage and enterprise networking. See "Features" tab for additional compatibility information.
- System Requirements:
Tripp Lite SFP+ Direct Attach Cable ( DAC ) Twinaxial cables conform to SFF-8431 standards, and as such can be used with the following manufacturers equipment that are open to 3rd party cables:QLOGIC * EMULEX * JUNIPER * ARISTA * IBM * DELL * EXTREMEEMC * BROADCOM * FINISAR * VOLTAIRE * CISCOCONFIRMED EQUIPMENT LIST ( *ensure the latest firmware and software is installed )CISCO NEXUS *CISCO CATALYST *CISCO CATALYST 3750xCISCO CATALYST 2960CISCO CATALYST 3500CISCO CATALYST 3550CISCO NEXUS 5010ARISTA 70505-64QUANTA T3048EXTREME X250EJUNIPER EX3200NOT COMPATIBLE TO 3RD PARTY CABLES: HP and BROCADE
- Package Includes:
• 1 m. (3 ft.) Green 30Awg SFP+ High Speed Passive Copper 10Gbps Cable
- N280-01M-GN: Eaton Corporation: OEM Acquisition