OEM#: B160-001-VSINew OEM Original Outright
VGA OVER IP TRANSMITTER/ EXTENDER W/ RS-232 SERIAL, IR CNTRL TAA by Tripp Lite
Your price:
$273.58 each
View All
OEM#: B160-001-VSIVGA OVER IP TRANSMITTER/ EXTENDER W/ RS-232 SERIAL, IR CNTRL TAA by Tripp Lite
New OEM Original Outright
Your price:
$273.58 each
VGA over IP Extender Transmitter over Cat5/Cat6, RS-232 Serial and IR Control, 1920 x 1440 (1080p), 328 ft. (100 m), TAA
Asset Information
Lifetime Limited Warranty
Are you an existing customer? Sign in to access your account.
ADD TO LIST
Product Overview
The B160-001-VSI VGA over IP Extender Transmitter works with a Tripp Lite B160-Series receiver (sold separately) to extend and distribute DisplayPort audio/video, RS-232 serial and IR (infrared) remote signals from the source to the display located up to 328 feet (100 meters) away, which is more than 200 feet farther than a traditional Cat5e/6 solution. By adding a chain of low-cost unmanaged network switches, such as Tripp Lite’s NG5, you can continue extending the distance between source and display up to 328 feet per switch.The B160-001-VSI displays a single source on a single display or distributes a single signal to multiple displays. Create a multi-in, multi-out installation with up to 64 transmitters and 255 receivers* by connecting dedicated managed Ethernet network switches** with Internet Group Management Protocol (IGMP), such as Tripp Lite’s NSS-G16D2.With a compatible B160-Series receiver, you can send the VGA video source to any analog or digital display, including HDMI and DisplayPort™, allowing you to mix and match technologies and use existing monitors. An IGMP-enabled switch will let you manage all connections for centralized control over which sources show on which displays.The B160-001-VSI supports video resolutions up to 1920 x 1440, including 1080p, though it’s limited to the maximum resolution of the receiver. It mounts to a wall, rack or pole using the included hardware. An HDMI output port allows connection of a local display.*Unmanaged switch installations are limited to two transmitter units. Number of receivers is limited to number of ports remaining on unmanaged switch.**B160-Series designed for use with dedicated network switch. Connecting to a switch used with other networking equipment will result in degraded or non-functional performance.
- Package Includes:
• Transmitter unit
• External power supply (Input: 100–240V, 50/60 Hz, 0.5A; Output: 5V 2A)
• Plug adapters for U.S., U.K., Europe and Australia
• IR-Out cable
• 3.5 mm to DB9 adapter cable (M/F)
• Mounting hardware
• Owner’s manual
Features
- Compatible with Tripp Lite B160-Series A/V over IP receivers
- HDMI output on transmitter for connecting local display
- Plug and play-no software or drivers required*Limited to maximum resolution of receiver
- Supports video resolutions up to 1920 x 1440, including 1080p*
- Video source can be sent to any analog or digital display
Technical Specs
P/N: B160-001-VSI Key Specs
Item
VGA OVER IP TRANSMITTER/ EXTENDER W/ RS-232 SERIAL, IR CNTRL TAA
OEM
Tripp Lite
OEM #
B160-001-VSI
Condition
New OEM Original
Returnable
No
Warranty
Other (See Notes)
Form Factor
External
Localization
Australia, United Kingdom, United States, Europe
Max Transfer Distance
328 ft
Power
AC 100 - 240 V
The B160-001-VSI VGA over IP Extender Transmitter works with a Tripp Lite B160-Series receiver (sold separately) to extend and distribute DisplayPort audio/video, RS-232 serial and IR (infrared) remote signals from the source to the display located up to 328 feet (100 meters) away, which is more than 200 feet farther than a traditional Cat5e/6 solution. By adding a chain of low-cost unmanaged network switches, such as Tripp Lite’s NG5, you can continue extending the distance between source and display up to 328 feet per switch.The B160-001-VSI displays a single source on a single display or distributes a single signal to multiple displays. Create a multi-in, multi-out installation with up to 64 transmitters and 255 receivers* by connecting dedicated managed Ethernet network switches** with Internet Group Management Protocol (IGMP), such as Tripp Lite’s NSS-G16D2.With a compatible B160-Series receiver, you can send the VGA video source to any analog or digital display, including HDMI and DisplayPort™, allowing you to mix and match technologies and use existing monitors. An IGMP-enabled switch will let you manage all connections for centralized control over which sources show on which displays.The B160-001-VSI supports video resolutions up to 1920 x 1440, including 1080p, though it’s limited to the maximum resolution of the receiver. It mounts to a wall, rack or pole using the included hardware. An HDMI output port allows connection of a local display.*Unmanaged switch installations are limited to two transmitter units. Number of receivers is limited to number of ports remaining on unmanaged switch.**B160-Series designed for use with dedicated network switch. Connecting to a switch used with other networking equipment will result in degraded or non-functional performance.
- Package Includes:
• Transmitter unit
• External power supply (Input: 100–240V, 50/60 Hz, 0.5A; Output: 5V 2A)
• Plug adapters for U.S., U.K., Europe and Australia
• IR-Out cable
• 3.5 mm to DB9 adapter cable (M/F)
• Mounting hardware
• Owner’s manual
Product Overview
The B160-001-VSI VGA over IP Extender Transmitter works with a Tripp Lite B160-Series receiver (sold separately) to extend and distribute DisplayPort audio/video, RS-232 serial and IR (infrared) remote signals from the source to the display located up to 328 feet (100 meters) away, which is more than 200 feet farther than a traditional Cat5e/6 solution. By adding a chain of low-cost unmanaged network switches, such as Tripp Lite’s NG5, you can continue extending the distance between source and display up to 328 feet per switch.The B160-001-VSI displays a single source on a single display or distributes a single signal to multiple displays. Create a multi-in, multi-out installation with up to 64 transmitters and 255 receivers* by connecting dedicated managed Ethernet network switches** with Internet Group Management Protocol (IGMP), such as Tripp Lite’s NSS-G16D2.With a compatible B160-Series receiver, you can send the VGA video source to any analog or digital display, including HDMI and DisplayPort™, allowing you to mix and match technologies and use existing monitors. An IGMP-enabled switch will let you manage all connections for centralized control over which sources show on which displays.The B160-001-VSI supports video resolutions up to 1920 x 1440, including 1080p, though it’s limited to the maximum resolution of the receiver. It mounts to a wall, rack or pole using the included hardware. An HDMI output port allows connection of a local display.*Unmanaged switch installations are limited to two transmitter units. Number of receivers is limited to number of ports remaining on unmanaged switch.**B160-Series designed for use with dedicated network switch. Connecting to a switch used with other networking equipment will result in degraded or non-functional performance.
- Package Includes:
• Transmitter unit
• External power supply (Input: 100–240V, 50/60 Hz, 0.5A; Output: 5V 2A)
• Plug adapters for U.S., U.K., Europe and Australia
• IR-Out cable
• 3.5 mm to DB9 adapter cable (M/F)
• Mounting hardware
• Owner’s manual
Features
- Compatible with Tripp Lite B160-Series A/V over IP receivers
- HDMI output on transmitter for connecting local display
- Plug and play-no software or drivers required*Limited to maximum resolution of receiver
- Supports video resolutions up to 1920 x 1440, including 1080p*
- Video source can be sent to any analog or digital display
Technical Specs
P/N: B160-001-VSI Key Specs
Item
VGA OVER IP TRANSMITTER/ EXTENDER W/ RS-232 SERIAL, IR CNTRL TAA
OEM
Tripp Lite
OEM #
B160-001-VSI
Condition
New OEM Original
Returnable
No
Warranty
Other (See Notes)
Form Factor
External
Localization
Australia, United Kingdom, United States, Europe
Max Transfer Distance
328 ft
Power
AC 100 - 240 V
The B160-001-VSI VGA over IP Extender Transmitter works with a Tripp Lite B160-Series receiver (sold separately) to extend and distribute DisplayPort audio/video, RS-232 serial and IR (infrared) remote signals from the source to the display located up to 328 feet (100 meters) away, which is more than 200 feet farther than a traditional Cat5e/6 solution. By adding a chain of low-cost unmanaged network switches, such as Tripp Lite’s NG5, you can continue extending the distance between source and display up to 328 feet per switch.The B160-001-VSI displays a single source on a single display or distributes a single signal to multiple displays. Create a multi-in, multi-out installation with up to 64 transmitters and 255 receivers* by connecting dedicated managed Ethernet network switches** with Internet Group Management Protocol (IGMP), such as Tripp Lite’s NSS-G16D2.With a compatible B160-Series receiver, you can send the VGA video source to any analog or digital display, including HDMI and DisplayPort™, allowing you to mix and match technologies and use existing monitors. An IGMP-enabled switch will let you manage all connections for centralized control over which sources show on which displays.The B160-001-VSI supports video resolutions up to 1920 x 1440, including 1080p, though it’s limited to the maximum resolution of the receiver. It mounts to a wall, rack or pole using the included hardware. An HDMI output port allows connection of a local display.*Unmanaged switch installations are limited to two transmitter units. Number of receivers is limited to number of ports remaining on unmanaged switch.**B160-Series designed for use with dedicated network switch. Connecting to a switch used with other networking equipment will result in degraded or non-functional performance.
- Package Includes:
• Transmitter unit
• External power supply (Input: 100–240V, 50/60 Hz, 0.5A; Output: 5V 2A)
• Plug adapters for U.S., U.K., Europe and Australia
• IR-Out cable
• 3.5 mm to DB9 adapter cable (M/F)
• Mounting hardware
• Owner’s manual
Product Overview
The B160-001-VSI VGA over IP Extender Transmitter works with a Tripp Lite B160-Series receiver (sold separately) to extend and distribute DisplayPort audio/video, RS-232 serial and IR (infrared) remote signals from the source to the display located up to 328 feet (100 meters) away, which is more than 200 feet farther than a traditional Cat5e/6 solution. By adding a chain of low-cost unmanaged network switches, such as Tripp Lite’s NG5, you can continue extending the distance between source and display up to 328 feet per switch.The B160-001-VSI displays a single source on a single display or distributes a single signal to multiple displays. Create a multi-in, multi-out installation with up to 64 transmitters and 255 receivers* by connecting dedicated managed Ethernet network switches** with Internet Group Management Protocol (IGMP), such as Tripp Lite’s NSS-G16D2.With a compatible B160-Series receiver, you can send the VGA video source to any analog or digital display, including HDMI and DisplayPort™, allowing you to mix and match technologies and use existing monitors. An IGMP-enabled switch will let you manage all connections for centralized control over which sources show on which displays.The B160-001-VSI supports video resolutions up to 1920 x 1440, including 1080p, though it’s limited to the maximum resolution of the receiver. It mounts to a wall, rack or pole using the included hardware. An HDMI output port allows connection of a local display.*Unmanaged switch installations are limited to two transmitter units. Number of receivers is limited to number of ports remaining on unmanaged switch.**B160-Series designed for use with dedicated network switch. Connecting to a switch used with other networking equipment will result in degraded or non-functional performance.
- Package Includes:
• Transmitter unit
• External power supply (Input: 100–240V, 50/60 Hz, 0.5A; Output: 5V 2A)
• Plug adapters for U.S., U.K., Europe and Australia
• IR-Out cable
• 3.5 mm to DB9 adapter cable (M/F)
• Mounting hardware
• Owner’s manual
Features
- Compatible with Tripp Lite B160-Series A/V over IP receivers
- HDMI output on transmitter for connecting local display
- Plug and play-no software or drivers required*Limited to maximum resolution of receiver
- Supports video resolutions up to 1920 x 1440, including 1080p*
- Video source can be sent to any analog or digital display
Technical Specs
P/N: B160-001-VSI Key Specs
Item
VGA OVER IP TRANSMITTER/ EXTENDER W/ RS-232 SERIAL, IR CNTRL TAA
OEM
Tripp Lite
OEM #
B160-001-VSI
Condition
New OEM Original
Returnable
No
Warranty
Other (See Notes)
Form Factor
External
Localization
Australia, United Kingdom, United States, Europe
Max Transfer Distance
328 ft
Power
AC 100 - 240 V
The B160-001-VSI VGA over IP Extender Transmitter works with a Tripp Lite B160-Series receiver (sold separately) to extend and distribute DisplayPort audio/video, RS-232 serial and IR (infrared) remote signals from the source to the display located up to 328 feet (100 meters) away, which is more than 200 feet farther than a traditional Cat5e/6 solution. By adding a chain of low-cost unmanaged network switches, such as Tripp Lite’s NG5, you can continue extending the distance between source and display up to 328 feet per switch.The B160-001-VSI displays a single source on a single display or distributes a single signal to multiple displays. Create a multi-in, multi-out installation with up to 64 transmitters and 255 receivers* by connecting dedicated managed Ethernet network switches** with Internet Group Management Protocol (IGMP), such as Tripp Lite’s NSS-G16D2.With a compatible B160-Series receiver, you can send the VGA video source to any analog or digital display, including HDMI and DisplayPort™, allowing you to mix and match technologies and use existing monitors. An IGMP-enabled switch will let you manage all connections for centralized control over which sources show on which displays.The B160-001-VSI supports video resolutions up to 1920 x 1440, including 1080p, though it’s limited to the maximum resolution of the receiver. It mounts to a wall, rack or pole using the included hardware. An HDMI output port allows connection of a local display.*Unmanaged switch installations are limited to two transmitter units. Number of receivers is limited to number of ports remaining on unmanaged switch.**B160-Series designed for use with dedicated network switch. Connecting to a switch used with other networking equipment will result in degraded or non-functional performance.
- Package Includes:
• Transmitter unit
• External power supply (Input: 100–240V, 50/60 Hz, 0.5A; Output: 5V 2A)
• Plug adapters for U.S., U.K., Europe and Australia
• IR-Out cable
• 3.5 mm to DB9 adapter cable (M/F)
• Mounting hardware
• Owner’s manual