OEM#: B156-002-HDMI

2-PORT DISPLAYPORT TO HDMI SPLITTER MULTI-DISPLAY ADAPTER TAA by Tripp Lite

Get everyone’s attention by broadcasting awesome messages in ultra-high definition video! With Tripp Lite's B156-002-HDMI 2-Port DisplayPort 1.2 to HDMI MST Hub, you can split or expand a single DisplayPort signal into two separate signals and display them on two HDMI monitors using standard DisplayPort (Tripp Lite P580-Series or P583-Series) and HDMI (Tripp Lite P568-Series) cables. You can display the same image on each monitor, extend the desktop across them, or display in video wall mode where monitors are combined to display as one, enlarged monitor. The B156-002-HDMI supports 4Kx2K Ultra-High Definition (UHD) video resolutions up to 3840 x 2160 (60 Hz), 48-bit Deep Color (16 bits per channel), and is compatible with HDCP, EDID and DDC. It comes with an external power supply and brackets for wall-, rack- or pole-mounting. All mounting hardware is included. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.

System Requirements:
• A computer with a DisplayPort v1.2 compatible Graphics Card (e.g. AMD Radeon with AMD Eyefinity technology) is required to display in video wall mode.
• Mac OS X does not support MST for NVIDIA and Intel GraphicsProcessor Units, limiting video display on the connected monitors to mirrormode.
• Backward compatible with most DisplayPort 1.1a equipment running current graphics drivers, with the feature set being limited to that of your equipment (e.g. you may be limited to displaying in Clone / Mirror Mode only). Compatibility with older graphics cards is not guaranteed.
• Maximum supported video resolutions and number of monitors will be dependent upon your graphics card. Check the specifications of your graphics card to determine its capabilities.
• A monitor with a HDMI port.
• For international use, the B110-INT power supply canbe purchased separately; it features plugs for the UK, Europe, and Australia

Package Includes:
• B156-002-HDMI DisplayPort 1.2 to HDMI Multi-Stream Transport (MST) Hub
• Mounting Hardware
• External Power Supply with NEMA 1-15P Plug (Input: 100-240V, 50/60Hz, 0.5A; Output: 5V, 2A, 5 ft.)

• Manufacturer: Tripp Lite
• Condition: New OEM Original
• Purchase Type: Outright
• Warranty: Other (See Notes)
• Returnable: No
• Compliant with DisplayPort 1.2
• Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases
• Display the same image on each monitor, extend the desktop across them, or display in video wall mode where monitors are combined to display as one
• Splits or expands a DisplayPort audio/video signal on two HDMI monitors
• Supports 4K x 2K Ultra High Definition (UHD) video resolutions up to 3840 x 2160 (60 Hz) - see System Requirements
• Supports up to 48-bit Deep Color (16 bits per channel)

• B156-002-HDMI: Eaton Corporation

Get everyone’s attention by broadcasting awesome messages in ultra-high definition video! With Tripp Lite's B156-002-HDMI 2-Port DisplayPort 1.2 to HDMI MST Hub, you can split or expand a single DisplayPort signal into two separate signals and display them on two HDMI monitors using standard DisplayPort (Tripp Lite P580-Series or P583-Series) and HDMI (Tripp Lite P568-Series) cables. You can display the same image on each monitor, extend the desktop across them, or display in video wall mode where monitors are combined to display as one, enlarged monitor. The B156-002-HDMI supports 4Kx2K Ultra-High Definition (UHD) video resolutions up to 3840 x 2160 (60 Hz), 48-bit Deep Color (16 bits per channel), and is compatible with HDCP, EDID and DDC. It comes with an external power supply and brackets for wall-, rack- or pole-mounting. All mounting hardware is included. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.

System Requirements:
• A computer with a DisplayPort v1.2 compatible Graphics Card (e.g. AMD Radeon with AMD Eyefinity technology) is required to display in video wall mode.
• Mac OS X does not support MST for NVIDIA and Intel GraphicsProcessor Units, limiting video display on the connected monitors to mirrormode.
• Backward compatible with most DisplayPort 1.1a equipment running current graphics drivers, with the feature set being limited to that of your equipment (e.g. you may be limited to displaying in Clone / Mirror Mode only). Compatibility with older graphics cards is not guaranteed.
• Maximum supported video resolutions and number of monitors will be dependent upon your graphics card. Check the specifications of your graphics card to determine its capabilities.
• A monitor with a HDMI port.
• For international use, the B110-INT power supply canbe purchased separately; it features plugs for the UK, Europe, and Australia

Package Includes:
• B156-002-HDMI DisplayPort 1.2 to HDMI Multi-Stream Transport (MST) Hub
• Mounting Hardware
• External Power Supply with NEMA 1-15P Plug (Input: 100-240V, 50/60Hz, 0.5A; Output: 5V, 2A, 5 ft.)

• B156-002-HDMI: Eaton Corporation