110V MOTOR CONTROL BOARD FOR 715-3571 REPAIR TREADMILL CONTROL by Star Trac (Core Health & Fitness)
OEM#: 715-3571110V MOTOR CONTROL BOARD FOR 715-3571 REPAIR TREADMILL CONTROL by Star Trac (Core Health & Fitness)
Control Board, Motor Type, 110V Voltage Rating, For 715-3571 Repair Treadmill Control
The MCB 715-3571 will now be used to replace the 800-3016, while the 715-3572 will be used to replace the 715-3132 (made by Pulse/Sabina) and the previous replacement 715-3463 (made by DCI). The 715-3571 and 715-3572 will look similar, and may have most of the same components, but are still different than each other. Please make sure you are using the correct part number for the correct voltage of treadmill. There is a large orange sticker to identify voltages of either 110V or 220V. We can use either one of the MCB’s for 2 different drive motor configurations. Units manufactured in and up to April 2004 will have either a black/grey Magnetek* or blue PacSci motor. Note: PacSci and Magnetek drive motors require a Filter Network to be installed in line between the power outputs of the MCB and the drive motor itself, where the Leeson motors do not require a Filter Network.
The MCB 715-3571 will now be used to replace the 800-3016, while the 715-3572 will be used to replace the 715-3132 (made by Pulse/Sabina) and the previous replacement 715-3463 (made by DCI). The 715-3571 and 715-3572 will look similar, and may have most of the same components, but are still different than each other. Please make sure you are using the correct part number for the correct voltage of treadmill. There is a large orange sticker to identify voltages of either 110V or 220V. We can use either one of the MCB’s for 2 different drive motor configurations. Units manufactured in and up to April 2004 will have either a black/grey Magnetek* or blue PacSci motor. Note: PacSci and Magnetek drive motors require a Filter Network to be installed in line between the power outputs of the MCB and the drive motor itself, where the Leeson motors do not require a Filter Network.
The MCB 715-3571 will now be used to replace the 800-3016, while the 715-3572 will be used to replace the 715-3132 (made by Pulse/Sabina) and the previous replacement 715-3463 (made by DCI). The 715-3571 and 715-3572 will look similar, and may have most of the same components, but are still different than each other. Please make sure you are using the correct part number for the correct voltage of treadmill. There is a large orange sticker to identify voltages of either 110V or 220V. We can use either one of the MCB’s for 2 different drive motor configurations. Units manufactured in and up to April 2004 will have either a black/grey Magnetek* or blue PacSci motor. Note: PacSci and Magnetek drive motors require a Filter Network to be installed in line between the power outputs of the MCB and the drive motor itself, where the Leeson motors do not require a Filter Network.
The MCB 715-3571 will now be used to replace the 800-3016, while the 715-3572 will be used to replace the 715-3132 (made by Pulse/Sabina) and the previous replacement 715-3463 (made by DCI). The 715-3571 and 715-3572 will look similar, and may have most of the same components, but are still different than each other. Please make sure you are using the correct part number for the correct voltage of treadmill. There is a large orange sticker to identify voltages of either 110V or 220V. We can use either one of the MCB’s for 2 different drive motor configurations. Units manufactured in and up to April 2004 will have either a black/grey Magnetek* or blue PacSci motor. Note: PacSci and Magnetek drive motors require a Filter Network to be installed in line between the power outputs of the MCB and the drive motor itself, where the Leeson motors do not require a Filter Network.
The MCB 715-3571 will now be used to replace the 800-3016, while the 715-3572 will be used to replace the 715-3132 (made by Pulse/Sabina) and the previous replacement 715-3463 (made by DCI). The 715-3571 and 715-3572 will look similar, and may have most of the same components, but are still different than each other. Please make sure you are using the correct part number for the correct voltage of treadmill. There is a large orange sticker to identify voltages of either 110V or 220V. We can use either one of the MCB’s for 2 different drive motor configurations. Units manufactured in and up to April 2004 will have either a black/grey Magnetek* or blue PacSci motor. Note: PacSci and Magnetek drive motors require a Filter Network to be installed in line between the power outputs of the MCB and the drive motor itself, where the Leeson motors do not require a Filter Network.
The MCB 715-3571 will now be used to replace the 800-3016, while the 715-3572 will be used to replace the 715-3132 (made by Pulse/Sabina) and the previous replacement 715-3463 (made by DCI). The 715-3571 and 715-3572 will look similar, and may have most of the same components, but are still different than each other. Please make sure you are using the correct part number for the correct voltage of treadmill. There is a large orange sticker to identify voltages of either 110V or 220V. We can use either one of the MCB’s for 2 different drive motor configurations. Units manufactured in and up to April 2004 will have either a black/grey Magnetek* or blue PacSci motor. Note: PacSci and Magnetek drive motors require a Filter Network to be installed in line between the power outputs of the MCB and the drive motor itself, where the Leeson motors do not require a Filter Network.