REPLACEMENT PART
Replaces Rauland-Borg Corporation 350018REPLACEMENT PART
The Responder 5000 Connector is used to terminate both ends of the cable connecting all K-Bus devices (patient and button stations) to Domeless Hall Lights/Controllers and all D-Network devices to patient stations. It provides insulation displacement pins that will accept 24AWG wire. Standard Category 5 wire colors are molded into the housing for simple termination. Use 350018 with CAT 5, CAT 5A, CAT 6, or CAT 6A and 23AWG cable.
- Terminal connector on both sides of the cable at K-Bus stations
- Material and finish: Glass-filled polycarbonate; 94HB
- Finishes: Phosphor Bronze with 30 micro-inches of gold over 50 micro-inches of nickel
- Assembled in a US FDA registered facility
The Responder 5000 Connector is used to terminate both ends of the cable connecting all K-Bus devices (patient and button stations) to Domeless Hall Lights/Controllers and all D-Network devices to patient stations. It provides insulation displacement pins that will accept 24AWG wire. Standard Category 5 wire colors are molded into the housing for simple termination. Use 350018 with CAT 5, CAT 5A, CAT 6, or CAT 6A and 23AWG cable.
- Terminal connector on both sides of the cable at K-Bus stations
- Material and finish: Glass-filled polycarbonate; 94HB
- Finishes: Phosphor Bronze with 30 micro-inches of gold over 50 micro-inches of nickel
- Assembled in a US FDA registered facility
The Responder 5000 Connector is used to terminate both ends of the cable connecting all K-Bus devices (patient and button stations) to Domeless Hall Lights/Controllers and all D-Network devices to patient stations. It provides insulation displacement pins that will accept 24AWG wire. Standard Category 5 wire colors are molded into the housing for simple termination. Use 350018 with CAT 5, CAT 5A, CAT 6, or CAT 6A and 23AWG cable.
- Terminal connector on both sides of the cable at K-Bus stations
- Material and finish: Glass-filled polycarbonate; 94HB
- Finishes: Phosphor Bronze with 30 micro-inches of gold over 50 micro-inches of nickel
- Assembled in a US FDA registered facility
The Responder 5000 Connector is used to terminate both ends of the cable connecting all K-Bus devices (patient and button stations) to Domeless Hall Lights/Controllers and all D-Network devices to patient stations. It provides insulation displacement pins that will accept 24AWG wire. Standard Category 5 wire colors are molded into the housing for simple termination. Use 350018 with CAT 5, CAT 5A, CAT 6, or CAT 6A and 23AWG cable.
- Terminal connector on both sides of the cable at K-Bus stations
- Material and finish: Glass-filled polycarbonate; 94HB
- Finishes: Phosphor Bronze with 30 micro-inches of gold over 50 micro-inches of nickel
- Assembled in a US FDA registered facility
The Responder 5000 Connector is used to terminate both ends of the cable connecting all K-Bus devices (patient and button stations) to Domeless Hall Lights/Controllers and all D-Network devices to patient stations. It provides insulation displacement pins that will accept 24AWG wire. Standard Category 5 wire colors are molded into the housing for simple termination. Use 350018 with CAT 5, CAT 5A, CAT 6, or CAT 6A and 23AWG cable.
- Terminal connector on both sides of the cable at K-Bus stations
- Material and finish: Glass-filled polycarbonate; 94HB
- Finishes: Phosphor Bronze with 30 micro-inches of gold over 50 micro-inches of nickel
- Assembled in a US FDA registered facility
The Responder 5000 Connector is used to terminate both ends of the cable connecting all K-Bus devices (patient and button stations) to Domeless Hall Lights/Controllers and all D-Network devices to patient stations. It provides insulation displacement pins that will accept 24AWG wire. Standard Category 5 wire colors are molded into the housing for simple termination. Use 350018 with CAT 5, CAT 5A, CAT 6, or CAT 6A and 23AWG cable.
- Terminal connector on both sides of the cable at K-Bus stations
- Material and finish: Glass-filled polycarbonate; 94HB
- Finishes: Phosphor Bronze with 30 micro-inches of gold over 50 micro-inches of nickel
- Assembled in a US FDA registered facility