KEYSWITCH CABLE ASSEMBLY by OEC Medical Systems (GE Healthcare)
OEM#: 00-885330-01KEYSWITCH CABLE ASSEMBLY by OEC Medical Systems (GE Healthcare)
A key switch is a switch that can be activated only by the use of a key. This key switch with cable assembly includes four flexible wires size 22 awg which are covered by heat shrink tubes. One end of these wires is soldered to a key switch and soldered pins are covered with shrink tubes which insulates the terminals. The other end of the wire is connected to a 4 position micro fit connector. This key switch in the assembly is a two position double pole double throw (dpdt) switch and has a current capacity of 4 amp at 28vdc/125vac. The assembly is 5 inches long and 100% open, short and miswire tested. This key switch cable assembly can be used with oec 9800 systems.
- Two Positions Key Switch
- Anti-static switch - exceeds 20 KV DC static resistance
- Labeled for Identification
- Reliable Operation
- Easy To Connect
A key switch is a switch that can be activated only by the use of a key. This key switch with cable assembly includes four flexible wires size 22 awg which are covered by heat shrink tubes. One end of these wires is soldered to a key switch and soldered pins are covered with shrink tubes which insulates the terminals. The other end of the wire is connected to a 4 position micro fit connector. This key switch in the assembly is a two position double pole double throw (dpdt) switch and has a current capacity of 4 amp at 28vdc/125vac. The assembly is 5 inches long and 100% open, short and miswire tested. This key switch cable assembly can be used with oec 9800 systems.
- OEC Medical Systems (GE Healthcare)
- 9900
A key switch is a switch that can be activated only by the use of a key. This key switch with cable assembly includes four flexible wires size 22 awg which are covered by heat shrink tubes. One end of these wires is soldered to a key switch and soldered pins are covered with shrink tubes which insulates the terminals. The other end of the wire is connected to a 4 position micro fit connector. This key switch in the assembly is a two position double pole double throw (dpdt) switch and has a current capacity of 4 amp at 28vdc/125vac. The assembly is 5 inches long and 100% open, short and miswire tested. This key switch cable assembly can be used with oec 9800 systems.
- Two Positions Key Switch
- Anti-static switch - exceeds 20 KV DC static resistance
- Labeled for Identification
- Reliable Operation
- Easy To Connect
A key switch is a switch that can be activated only by the use of a key. This key switch with cable assembly includes four flexible wires size 22 awg which are covered by heat shrink tubes. One end of these wires is soldered to a key switch and soldered pins are covered with shrink tubes which insulates the terminals. The other end of the wire is connected to a 4 position micro fit connector. This key switch in the assembly is a two position double pole double throw (dpdt) switch and has a current capacity of 4 amp at 28vdc/125vac. The assembly is 5 inches long and 100% open, short and miswire tested. This key switch cable assembly can be used with oec 9800 systems.
- OEC Medical Systems (GE Healthcare)
- 9900
A key switch is a switch that can be activated only by the use of a key. This key switch with cable assembly includes four flexible wires size 22 awg which are covered by heat shrink tubes. One end of these wires is soldered to a key switch and soldered pins are covered with shrink tubes which insulates the terminals. The other end of the wire is connected to a 4 position micro fit connector. This key switch in the assembly is a two position double pole double throw (dpdt) switch and has a current capacity of 4 amp at 28vdc/125vac. The assembly is 5 inches long and 100% open, short and miswire tested. This key switch cable assembly can be used with oec 9800 systems.
- Two Positions Key Switch
- Anti-static switch - exceeds 20 KV DC static resistance
- Labeled for Identification
- Reliable Operation
- Easy To Connect
A key switch is a switch that can be activated only by the use of a key. This key switch with cable assembly includes four flexible wires size 22 awg which are covered by heat shrink tubes. One end of these wires is soldered to a key switch and soldered pins are covered with shrink tubes which insulates the terminals. The other end of the wire is connected to a 4 position micro fit connector. This key switch in the assembly is a two position double pole double throw (dpdt) switch and has a current capacity of 4 amp at 28vdc/125vac. The assembly is 5 inches long and 100% open, short and miswire tested. This key switch cable assembly can be used with oec 9800 systems.
- OEC Medical Systems (GE Healthcare)
- 9900