Replaces Medivators (Cantel Medical) (now STERIS) MF010070New Aftermarket Outright

1 MICRON, 10", ADVANTAGE PLUS PRE-FILTER

Your price:
$29.15 each
$54.90 Savings: $25.75 (47%)
Estimated to ship by 11/11 if ordered before 5:30 PM EST
BUYING OPTIONS:
New Aftermarket
Outright Purchase
$29.15 each
Warranty: As Is
New OEM Original
Outright Purchase
$58.00 each
Warranty: 90 Day
1 MICRON, 10", ADVANTAGE PLUS PRE-FILTER
1 MICRON, 10", ADVANTAGE PLUS PRE-FILTER

Replaces Medivators (Cantel Medical) (now STERIS) MF010070
1 MICRON, 10", ADVANTAGE PLUS PRE-FILTER

New Aftermarket Outright
Your price:
$29.15 each
$54.90 Savings: $25.75 (47%)
Ready to shipReady to Ship
Estimated to ship by 11/11 if ordered before 5:30 PM EST
Asset Information
Product Overview

Water filters should be replaced at a minimum every three months for the 1.0 micron and 0.4 micron filters and every six months for the 0.1 micron filter. If the water pressure drops below 40 PSI or the difference between the gauges is greater than 5 PSI the corresponding filter needs to be replaced. The following conditions must be met before changing a filter: 1. No endoscope reprocessing cycles are running; 2. No water line disinfection procedure is running.

  • This filter is located outside the ADVANTAGE PLUS Endoscope Reprocessor
  • When looking at the pre-filtration system, it is the filter located on the far right
  • Change is pressure related, water pressure must be 40 psi or above
  • Always keep one on hand
  • Change at least every 3 months even if pressure remains above 35 psi

Technical Specs
P/N: MF010070 Key Specs
Item
1 MICRON, 10", ADVANTAGE PLUS PRE-FILTER
OEM
Medivators (Cantel Medical) (now STERIS)
OEM #
MF010070
Condition
New Aftermarket
Returnable
Yes
Warranty
As Is
Micron Rating
1 um
Equivalents

Water filters should be replaced at a minimum every three months for the 1.0 micron and 0.4 micron filters and every six months for the 0.1 micron filter. If the water pressure drops below 40 PSI or the difference between the gauges is greater than 5 PSI the corresponding filter needs to be replaced. The following conditions must be met before changing a filter: 1. No endoscope reprocessing cycles are running; 2. No water line disinfection procedure is running.

  • This filter is located outside the ADVANTAGE PLUS Endoscope Reprocessor
  • When looking at the pre-filtration system, it is the filter located on the far right
  • Change is pressure related, water pressure must be 40 psi or above
  • Always keep one on hand
  • Change at least every 3 months even if pressure remains above 35 psi

  • MF01-0070: STERIS Corporation: OEM Acquisition
Product Overview

Water filters should be replaced at a minimum every three months for the 1.0 micron and 0.4 micron filters and every six months for the 0.1 micron filter. If the water pressure drops below 40 PSI or the difference between the gauges is greater than 5 PSI the corresponding filter needs to be replaced. The following conditions must be met before changing a filter: 1. No endoscope reprocessing cycles are running; 2. No water line disinfection procedure is running.

  • This filter is located outside the ADVANTAGE PLUS Endoscope Reprocessor
  • When looking at the pre-filtration system, it is the filter located on the far right
  • Change is pressure related, water pressure must be 40 psi or above
  • Always keep one on hand
  • Change at least every 3 months even if pressure remains above 35 psi

Technical Specs
P/N: MF010070 Key Specs
Item
1 MICRON, 10", ADVANTAGE PLUS PRE-FILTER
OEM
Medivators (Cantel Medical) (now STERIS)
OEM #
MF010070
Condition
New Aftermarket
Returnable
Yes
Warranty
As Is
Micron Rating
1 um
Equivalents

Water filters should be replaced at a minimum every three months for the 1.0 micron and 0.4 micron filters and every six months for the 0.1 micron filter. If the water pressure drops below 40 PSI or the difference between the gauges is greater than 5 PSI the corresponding filter needs to be replaced. The following conditions must be met before changing a filter: 1. No endoscope reprocessing cycles are running; 2. No water line disinfection procedure is running.

  • This filter is located outside the ADVANTAGE PLUS Endoscope Reprocessor
  • When looking at the pre-filtration system, it is the filter located on the far right
  • Change is pressure related, water pressure must be 40 psi or above
  • Always keep one on hand
  • Change at least every 3 months even if pressure remains above 35 psi

  • MF01-0070: STERIS Corporation: OEM Acquisition
Product Overview

Water filters should be replaced at a minimum every three months for the 1.0 micron and 0.4 micron filters and every six months for the 0.1 micron filter. If the water pressure drops below 40 PSI or the difference between the gauges is greater than 5 PSI the corresponding filter needs to be replaced. The following conditions must be met before changing a filter: 1. No endoscope reprocessing cycles are running; 2. No water line disinfection procedure is running.

  • This filter is located outside the ADVANTAGE PLUS Endoscope Reprocessor
  • When looking at the pre-filtration system, it is the filter located on the far right
  • Change is pressure related, water pressure must be 40 psi or above
  • Always keep one on hand
  • Change at least every 3 months even if pressure remains above 35 psi

Technical Specs
P/N: MF010070 Key Specs
Item
1 MICRON, 10", ADVANTAGE PLUS PRE-FILTER
OEM
Medivators (Cantel Medical) (now STERIS)
OEM #
MF010070
Condition
New Aftermarket
Returnable
Yes
Warranty
As Is
Micron Rating
1 um
Equivalents

Water filters should be replaced at a minimum every three months for the 1.0 micron and 0.4 micron filters and every six months for the 0.1 micron filter. If the water pressure drops below 40 PSI or the difference between the gauges is greater than 5 PSI the corresponding filter needs to be replaced. The following conditions must be met before changing a filter: 1. No endoscope reprocessing cycles are running; 2. No water line disinfection procedure is running.

  • This filter is located outside the ADVANTAGE PLUS Endoscope Reprocessor
  • When looking at the pre-filtration system, it is the filter located on the far right
  • Change is pressure related, water pressure must be 40 psi or above
  • Always keep one on hand
  • Change at least every 3 months even if pressure remains above 35 psi

  • MF01-0070: STERIS Corporation: OEM Acquisition