OEM#: 5105

0-10PPM RESIDUAL PEROXIDE TEST STRIP by Mar Cor Purification

Serim GUARDIAN RESIDUAL PEROXIDE Test Strips (Product Code 5105) provide a convenient means for measuring the concentration of peroxide remaining in dialysate lines and dialyzers after disinfection with peracetic acid/peroxide-based disinfectants (such as Renalin,® Actril,® Minncare,®1 Puristeril,™2 andPeracidin,™3 and Micro-x 6,Because concentrations of peracetic acid are much lower than hydrogen peroxide levels, specifi c measurement of peroxide gives an estimate of the total residue,A rapid screening method will detect levels of peroxide at and above 1 ppm and a 15 second semi-quantitative method allows estimation of concentrations between 0 and 10 ppm.

• Keep all unused test strips in the original bottle
• Do not remove the desiccant pack.
• Replace the cap immediately and tightly after removing a test strip; the strips must be protected from humidity
• Do not touch the indicator pad.
• Do not allow the indicator pad to come into contact with liquids or with work surfaces which may be contaminated with potentially interfering substances
• Serim GUARDIAN RESIDUAL PEROXIDE Test Strips are intended only for testing residual levels of peracetic acid/ peroxide-based disinfectants following a rinse procedure.

• Keep all unused test strips in the original bottle
• Do not remove the desiccant pack.
• Replace the cap immediately and tightly after removing a test strip, the strips must be protected from humidity
• Do not touch the indicator pad.
• Serim GUARDIAN RESIDUAL PEROXIDE Test Strips are intended only for testing residual levels of peracetic acid/ peroxide-based disinfectants following a rinse procedure.

Serim GUARDIAN RESIDUAL PEROXIDE Test Strips (Product Code 5105) provide a convenient means for measuring the concentration of peroxide remaining in dialysate lines and dialyzers after disinfection with peracetic acid/peroxide-based disinfectants (such as Renalin,® Actril,® Minncare,®1 Puristeril,™2 andPeracidin,™3 and Micro-x 6,Because concentrations of peracetic acid are much lower than hydrogen peroxide levels, specifi c measurement of peroxide gives an estimate of the total residue,A rapid screening method will detect levels of peroxide at and above 1 ppm and a 15 second semi-quantitative method allows estimation of concentrations between 0 and 10 ppm.

• Keep all unused test strips in the original bottle
• Do not remove the desiccant pack.
• Replace the cap immediately and tightly after removing a test strip; the strips must be protected from humidity
• Do not touch the indicator pad.
• Do not allow the indicator pad to come into contact with liquids or with work surfaces which may be contaminated with potentially interfering substances
• Serim GUARDIAN RESIDUAL PEROXIDE Test Strips are intended only for testing residual levels of peracetic acid/ peroxide-based disinfectants following a rinse procedure.