REPLACEMENT FOR LUTRON EC3DT4MWKU2S


Replaces Lutron EC3DT4MWKU2SREPLACEMENT FOR LUTRON EC3DT4MWKU2S
Ballast, Compact Fluorescent, Digital, Dimming Type, EcoSystem® Brand Name, Rapid Ballast Start Type, Electronic Ballast Type, 32W Bulb Wattage, Proprietary Dimming Method, 100 to 5% Dimming Range, Full Continuous Dimming Type, 50/60Hz Frequency Range, 120 to 277VAC Input Voltage, 50°F Minimum Starting Temperature, 5 L x 3 W x 1in H Overall Dimension, Class P Thermal Protection, Parallel Wiring Type, UL, CSA Certification
EcoSystem compact ballasts provide high-performance dimming for any compact fluorescent application, including within an EcoSystem Lighting Control System. EcoSystem compact ballasts offer 100% to 5% dimming, providing both energy savings and lighting flexibility.
- Continuous, flicker-free dimming from 100% to 5%
- Compatible with Energi Savr Node with EcoSystem devices, GRAFIK Eye QS with EcoSystem connection, PowPak dimming module with EcoSystem connection, and Quantum systems, allowing for integration into an existing/planned EcoSystem lighting control system
- Supports standard 3-wire line-voltage phase control technology
- Programmed rapid start design ensures full-rated lamp life while dimming and cycling
- Lamps turn on to any dimmed level without flashing to full brightness
- Low harmonic distortion throughout the entire dimming range
- Frequency of operation ensures that ballast does not interfere with infrared devices
- Inrush current limiting circuitry eliminates circuit breaker tripping, switch arcing, and relay failure
- Ultra-quiet operation
- Protected from miswires of any input power to control lead, or from lamp leads to each other and/or ground
- End-of-lamp-life protection circuitry ensures safe operation throughout entire lamp life
- 100% compatible with all Lutron 3-wire fluorescent controls and EcoSystem digital controls
- 100% performance tested at factory
EcoSystem compact ballasts provide high-performance dimming for any compact fluorescent application, including within an EcoSystem Lighting Control System. EcoSystem compact ballasts offer 100% to 5% dimming, providing both energy savings and lighting flexibility.
- Continuous, flicker-free dimming from 100% to 5%
- Compatible with Energi Savr Node with EcoSystem devices, GRAFIK Eye QS with EcoSystem connection, PowPak dimming module with EcoSystem connection, and Quantum systems, allowing for integration into an existing/planned EcoSystem lighting control system
- Supports standard 3-wire line-voltage phase control technology
- Programmed rapid start design ensures full-rated lamp life while dimming and cycling
- Lamps turn on to any dimmed level without flashing to full brightness
- Low harmonic distortion throughout the entire dimming range
- Frequency of operation ensures that ballast does not interfere with infrared devices
- Inrush current limiting circuitry eliminates circuit breaker tripping, switch arcing, and relay failure
- Ultra-quiet operation
- Protected from miswires of any input power to control lead, or from lamp leads to each other and/or ground
- End-of-lamp-life protection circuitry ensures safe operation throughout entire lamp life
- 100% compatible with all Lutron 3-wire fluorescent controls and EcoSystem digital controls
- 100% performance tested at factory
EcoSystem compact ballasts provide high-performance dimming for any compact fluorescent application, including within an EcoSystem Lighting Control System. EcoSystem compact ballasts offer 100% to 5% dimming, providing both energy savings and lighting flexibility.
- Continuous, flicker-free dimming from 100% to 5%
- Compatible with Energi Savr Node with EcoSystem devices, GRAFIK Eye QS with EcoSystem connection, PowPak dimming module with EcoSystem connection, and Quantum systems, allowing for integration into an existing/planned EcoSystem lighting control system
- Supports standard 3-wire line-voltage phase control technology
- Programmed rapid start design ensures full-rated lamp life while dimming and cycling
- Lamps turn on to any dimmed level without flashing to full brightness
- Low harmonic distortion throughout the entire dimming range
- Frequency of operation ensures that ballast does not interfere with infrared devices
- Inrush current limiting circuitry eliminates circuit breaker tripping, switch arcing, and relay failure
- Ultra-quiet operation
- Protected from miswires of any input power to control lead, or from lamp leads to each other and/or ground
- End-of-lamp-life protection circuitry ensures safe operation throughout entire lamp life
- 100% compatible with all Lutron 3-wire fluorescent controls and EcoSystem digital controls
- 100% performance tested at factory
EcoSystem compact ballasts provide high-performance dimming for any compact fluorescent application, including within an EcoSystem Lighting Control System. EcoSystem compact ballasts offer 100% to 5% dimming, providing both energy savings and lighting flexibility.
- Continuous, flicker-free dimming from 100% to 5%
- Compatible with Energi Savr Node with EcoSystem devices, GRAFIK Eye QS with EcoSystem connection, PowPak dimming module with EcoSystem connection, and Quantum systems, allowing for integration into an existing/planned EcoSystem lighting control system
- Supports standard 3-wire line-voltage phase control technology
- Programmed rapid start design ensures full-rated lamp life while dimming and cycling
- Lamps turn on to any dimmed level without flashing to full brightness
- Low harmonic distortion throughout the entire dimming range
- Frequency of operation ensures that ballast does not interfere with infrared devices
- Inrush current limiting circuitry eliminates circuit breaker tripping, switch arcing, and relay failure
- Ultra-quiet operation
- Protected from miswires of any input power to control lead, or from lamp leads to each other and/or ground
- End-of-lamp-life protection circuitry ensures safe operation throughout entire lamp life
- 100% compatible with all Lutron 3-wire fluorescent controls and EcoSystem digital controls
- 100% performance tested at factory
EcoSystem compact ballasts provide high-performance dimming for any compact fluorescent application, including within an EcoSystem Lighting Control System. EcoSystem compact ballasts offer 100% to 5% dimming, providing both energy savings and lighting flexibility.
- Continuous, flicker-free dimming from 100% to 5%
- Compatible with Energi Savr Node with EcoSystem devices, GRAFIK Eye QS with EcoSystem connection, PowPak dimming module with EcoSystem connection, and Quantum systems, allowing for integration into an existing/planned EcoSystem lighting control system
- Supports standard 3-wire line-voltage phase control technology
- Programmed rapid start design ensures full-rated lamp life while dimming and cycling
- Lamps turn on to any dimmed level without flashing to full brightness
- Low harmonic distortion throughout the entire dimming range
- Frequency of operation ensures that ballast does not interfere with infrared devices
- Inrush current limiting circuitry eliminates circuit breaker tripping, switch arcing, and relay failure
- Ultra-quiet operation
- Protected from miswires of any input power to control lead, or from lamp leads to each other and/or ground
- End-of-lamp-life protection circuitry ensures safe operation throughout entire lamp life
- 100% compatible with all Lutron 3-wire fluorescent controls and EcoSystem digital controls
- 100% performance tested at factory
EcoSystem compact ballasts provide high-performance dimming for any compact fluorescent application, including within an EcoSystem Lighting Control System. EcoSystem compact ballasts offer 100% to 5% dimming, providing both energy savings and lighting flexibility.
- Continuous, flicker-free dimming from 100% to 5%
- Compatible with Energi Savr Node with EcoSystem devices, GRAFIK Eye QS with EcoSystem connection, PowPak dimming module with EcoSystem connection, and Quantum systems, allowing for integration into an existing/planned EcoSystem lighting control system
- Supports standard 3-wire line-voltage phase control technology
- Programmed rapid start design ensures full-rated lamp life while dimming and cycling
- Lamps turn on to any dimmed level without flashing to full brightness
- Low harmonic distortion throughout the entire dimming range
- Frequency of operation ensures that ballast does not interfere with infrared devices
- Inrush current limiting circuitry eliminates circuit breaker tripping, switch arcing, and relay failure
- Ultra-quiet operation
- Protected from miswires of any input power to control lead, or from lamp leads to each other and/or ground
- End-of-lamp-life protection circuitry ensures safe operation throughout entire lamp life
- 100% compatible with all Lutron 3-wire fluorescent controls and EcoSystem digital controls
- 100% performance tested at factory
