Hello, Sign In
Previous
Sign In
Tools
Browsing History
Sign In
Replaces Leica Microsystems, Inc. LP2-4200FNew Aftermarket Outright

POWER SUPPLY FOR A TP1050

Your price:
$344.61 eachReady to ship
HomeLeica Microsystems, Inc.lp24200f
POWER SUPPLY FOR A TP1050
POWER SUPPLY FOR A TP1050

Replaces Leica Microsystems, Inc. LP2-4200F
POWER SUPPLY FOR A TP1050

New Aftermarket Outright
Your price:
$344.61 each

Power Supply, 5.51 x 5.91 x 3.39in Dimensions, 95 to 132VAC/180 to 264VAC (Switchable) Input Voltage, 200W Power Rating, 20 to 95% (Operating), 10 to 95% (Non-Operating) Relative Humidity, 0 to 50°C Operating Temperature, For TP1050 Tissue Processor

Ready to ship
Asset Information
Are you an existing customer? Sign in to access your account.
ADD TO LIST
Product Overview
  • Hold up time: 16 ms minimum at full load and normal input voltage
  • Remarks:85% is normal condition and 95% is with special coating process
  • Over current protection: short circuit
  • Over load protection: 110 to 150% max
  • Over voltage protection: +5v output: 5.5v to 6.5v; +12v output: 13.5v to 15.5v
  • Power good signal: on delay 100ms to 500ms, off delay 1ms
  • Transient response: output voltage returns in less than 1ms max. following a 50% load change
  • Transient response: output voltage returns in less than 1ms max. following a 50% load change
Technical Specs
P/N: LP2-4200F Key Specs
Item
POWER SUPPLY FOR A TP1050
OEM
Leica Microsystems, Inc.
OEM #
LP2-4200F
Condition
New Aftermarket
Returnable
No
Warranty
30 Day
Power Rating
200 W
Standards
CSA, TUV, UL
Voltage Rating
95 to 132/180 to 264 VAC
  • Hold up time: 16 ms minimum at full load and normal input voltage
  • Remarks:85% is normal condition and 95% is with special coating process
  • Over current protection: short circuit
  • Over load protection: 110 to 150% max
  • Over voltage protection: +5v output: 5.5v to 6.5v; +12v output: 13.5v to 15.5v
  • Power good signal: on delay 100ms to 500ms, off delay 1ms
  • Transient response: output voltage returns in less than 1ms max. following a 50% load change
  • Transient response: output voltage returns in less than 1ms max. following a 50% load change
    Product Overview
    • Hold up time: 16 ms minimum at full load and normal input voltage
    • Remarks:85% is normal condition and 95% is with special coating process
    • Over current protection: short circuit
    • Over load protection: 110 to 150% max
    • Over voltage protection: +5v output: 5.5v to 6.5v; +12v output: 13.5v to 15.5v
    • Power good signal: on delay 100ms to 500ms, off delay 1ms
    • Transient response: output voltage returns in less than 1ms max. following a 50% load change
    • Transient response: output voltage returns in less than 1ms max. following a 50% load change
    Technical Specs
    P/N: LP2-4200F Key Specs
    Item
    POWER SUPPLY FOR A TP1050
    OEM
    Leica Microsystems, Inc.
    OEM #
    LP2-4200F
    Condition
    New Aftermarket
    Returnable
    No
    Warranty
    30 Day
    Power Rating
    200 W
    Standards
    CSA, TUV, UL
    Voltage Rating
    95 to 132/180 to 264 VAC
    • Hold up time: 16 ms minimum at full load and normal input voltage
    • Remarks:85% is normal condition and 95% is with special coating process
    • Over current protection: short circuit
    • Over load protection: 110 to 150% max
    • Over voltage protection: +5v output: 5.5v to 6.5v; +12v output: 13.5v to 15.5v
    • Power good signal: on delay 100ms to 500ms, off delay 1ms
    • Transient response: output voltage returns in less than 1ms max. following a 50% load change
    • Transient response: output voltage returns in less than 1ms max. following a 50% load change
      Product Overview
      • Hold up time: 16 ms minimum at full load and normal input voltage
      • Remarks:85% is normal condition and 95% is with special coating process
      • Over current protection: short circuit
      • Over load protection: 110 to 150% max
      • Over voltage protection: +5v output: 5.5v to 6.5v; +12v output: 13.5v to 15.5v
      • Power good signal: on delay 100ms to 500ms, off delay 1ms
      • Transient response: output voltage returns in less than 1ms max. following a 50% load change
      • Transient response: output voltage returns in less than 1ms max. following a 50% load change
      Technical Specs
      P/N: LP2-4200F Key Specs
      Item
      POWER SUPPLY FOR A TP1050
      OEM
      Leica Microsystems, Inc.
      OEM #
      LP2-4200F
      Condition
      New Aftermarket
      Returnable
      No
      Warranty
      30 Day
      Power Rating
      200 W
      Standards
      CSA, TUV, UL
      Voltage Rating
      95 to 132/180 to 264 VAC
      • Hold up time: 16 ms minimum at full load and normal input voltage
      • Remarks:85% is normal condition and 95% is with special coating process
      • Over current protection: short circuit
      • Over load protection: 110 to 150% max
      • Over voltage protection: +5v output: 5.5v to 6.5v; +12v output: 13.5v to 15.5v
      • Power good signal: on delay 100ms to 500ms, off delay 1ms
      • Transient response: output voltage returns in less than 1ms max. following a 50% load change
      • Transient response: output voltage returns in less than 1ms max. following a 50% load change