MOBILE DETECTOR HOLDER by Kenex
OEM#: 1330/3MOBILE DETECTOR HOLDER by Kenex
Holder, Mobile Detector, 6.7kg Counterbalanced Load, 129cm Height Adjustable, 12.5cm Wheel Diameter
These versatile Kenex holders can be used with portable DR panels, CR, DR and film cassettes/grids. Telescopic width adjustment allows for cassettes/image receptors from 24.5 cm wide up to 53.5 cm wide and up to 3 cm thick. They roll smoothly on large quick locking castors and facilitate examinations in accident & emergency departments, operating rooms, and radiographic rooms. The heavy duty base gives a low centre of gravity, which helps provide a precise, stable, and safe imaging platform. Vertical movements are counterbalanced for simple and quick height adjustments. The holder is particularly suitable for cross-table views, sometimes with the DR panel or cassette positioned slightly below the table top to eliminate image cut-off. It also assists in acquiring fast skyline views of the patellar, or effective views of the shoulder with the patient on the table or in a chair. The sides of the holder can be quickly extended or retracted to secure different sizes. These telescopic adjustments present a compact platform with no protruding parts. The holder can be turned, tilted, and orientated to suit any desired examination position. It can therefore be placed above, beside, below, or beneath a table or trolley. It is adjustable for height from floor level to 129 cm (measured from the lower edge of the DR panel or cassette) and can overhang the X-ray or operating table by up to 62 cm.
- Stable and compact design
- Unlimited orientation and positioning opportunities
- Telescopic width adjustment for cassettes/image receptors from 24.5 cm wide up to 53.5 cm wide
- Holds portable DR Panels and CR/film cassettes from 24 x 30 cm to 35 x 43 cm
- Can hold full leg/spine image receptors of any length
- Counterbalance mechanism included for effortless raising or lowering
- Overhangs table or trolley by up to 62 cm
- Accepts cassette and image receptors up to 30 mm depth
- Castors are fitted with guards to prevent the pedestal running over cables
- Heavy base and low center of gravity gives added stability
- Smooth easy to clean hardwearing surfaces
- Heavy base and low center of gravity gives added stability
- Stable and compact design
- Smooth easy to clean hardwearing surfaces
- Unlimited orientation and positioning opportunities
- Telescopic width adjustment for cassettes/image receptors from 24.5 cm wide up to 53.5 cm wide
- Holds portable DR Panels and CR/film cassettes from 24 x 30 cm to 35 x 43 cm
- Can hold full leg/spine image receptors of any length
- Counterbalance mechanism included for effortless raising or lowering
- Overhangs table or trolley by up to 62 cm
- Accepts cassette and image receptors up to 30 mm depth
- Castors are fitted with guards to prevent the pedestal running over cables
These versatile Kenex holders can be used with portable DR panels, CR, DR and film cassettes/grids. Telescopic width adjustment allows for cassettes/image receptors from 24.5 cm wide up to 53.5 cm wide and up to 3 cm thick. They roll smoothly on large quick locking castors and facilitate examinations in accident & emergency departments, operating rooms, and radiographic rooms. The heavy duty base gives a low centre of gravity, which helps provide a precise, stable, and safe imaging platform. Vertical movements are counterbalanced for simple and quick height adjustments. The holder is particularly suitable for cross-table views, sometimes with the DR panel or cassette positioned slightly below the table top to eliminate image cut-off. It also assists in acquiring fast skyline views of the patellar, or effective views of the shoulder with the patient on the table or in a chair. The sides of the holder can be quickly extended or retracted to secure different sizes. These telescopic adjustments present a compact platform with no protruding parts. The holder can be turned, tilted, and orientated to suit any desired examination position. It can therefore be placed above, beside, below, or beneath a table or trolley. It is adjustable for height from floor level to 129 cm (measured from the lower edge of the DR panel or cassette) and can overhang the X-ray or operating table by up to 62 cm.
- Stable and compact design
- Unlimited orientation and positioning opportunities
- Telescopic width adjustment for cassettes/image receptors from 24.5 cm wide up to 53.5 cm wide
- Holds portable DR Panels and CR/film cassettes from 24 x 30 cm to 35 x 43 cm
- Can hold full leg/spine image receptors of any length
- Counterbalance mechanism included for effortless raising or lowering
- Overhangs table or trolley by up to 62 cm
- Accepts cassette and image receptors up to 30 mm depth
- Castors are fitted with guards to prevent the pedestal running over cables
- Heavy base and low center of gravity gives added stability
- Smooth easy to clean hardwearing surfaces
These versatile Kenex holders can be used with portable DR panels, CR, DR and film cassettes/grids. Telescopic width adjustment allows for cassettes/image receptors from 24.5 cm wide up to 53.5 cm wide and up to 3 cm thick. They roll smoothly on large quick locking castors and facilitate examinations in accident & emergency departments, operating rooms, and radiographic rooms. The heavy duty base gives a low centre of gravity, which helps provide a precise, stable, and safe imaging platform. Vertical movements are counterbalanced for simple and quick height adjustments. The holder is particularly suitable for cross-table views, sometimes with the DR panel or cassette positioned slightly below the table top to eliminate image cut-off. It also assists in acquiring fast skyline views of the patellar, or effective views of the shoulder with the patient on the table or in a chair. The sides of the holder can be quickly extended or retracted to secure different sizes. These telescopic adjustments present a compact platform with no protruding parts. The holder can be turned, tilted, and orientated to suit any desired examination position. It can therefore be placed above, beside, below, or beneath a table or trolley. It is adjustable for height from floor level to 129 cm (measured from the lower edge of the DR panel or cassette) and can overhang the X-ray or operating table by up to 62 cm.
- Stable and compact design
- Unlimited orientation and positioning opportunities
- Telescopic width adjustment for cassettes/image receptors from 24.5 cm wide up to 53.5 cm wide
- Holds portable DR Panels and CR/film cassettes from 24 x 30 cm to 35 x 43 cm
- Can hold full leg/spine image receptors of any length
- Counterbalance mechanism included for effortless raising or lowering
- Overhangs table or trolley by up to 62 cm
- Accepts cassette and image receptors up to 30 mm depth
- Castors are fitted with guards to prevent the pedestal running over cables
- Heavy base and low center of gravity gives added stability
- Smooth easy to clean hardwearing surfaces
- Heavy base and low center of gravity gives added stability
- Stable and compact design
- Smooth easy to clean hardwearing surfaces
- Unlimited orientation and positioning opportunities
- Telescopic width adjustment for cassettes/image receptors from 24.5 cm wide up to 53.5 cm wide
- Holds portable DR Panels and CR/film cassettes from 24 x 30 cm to 35 x 43 cm
- Can hold full leg/spine image receptors of any length
- Counterbalance mechanism included for effortless raising or lowering
- Overhangs table or trolley by up to 62 cm
- Accepts cassette and image receptors up to 30 mm depth
- Castors are fitted with guards to prevent the pedestal running over cables
These versatile Kenex holders can be used with portable DR panels, CR, DR and film cassettes/grids. Telescopic width adjustment allows for cassettes/image receptors from 24.5 cm wide up to 53.5 cm wide and up to 3 cm thick. They roll smoothly on large quick locking castors and facilitate examinations in accident & emergency departments, operating rooms, and radiographic rooms. The heavy duty base gives a low centre of gravity, which helps provide a precise, stable, and safe imaging platform. Vertical movements are counterbalanced for simple and quick height adjustments. The holder is particularly suitable for cross-table views, sometimes with the DR panel or cassette positioned slightly below the table top to eliminate image cut-off. It also assists in acquiring fast skyline views of the patellar, or effective views of the shoulder with the patient on the table or in a chair. The sides of the holder can be quickly extended or retracted to secure different sizes. These telescopic adjustments present a compact platform with no protruding parts. The holder can be turned, tilted, and orientated to suit any desired examination position. It can therefore be placed above, beside, below, or beneath a table or trolley. It is adjustable for height from floor level to 129 cm (measured from the lower edge of the DR panel or cassette) and can overhang the X-ray or operating table by up to 62 cm.
- Stable and compact design
- Unlimited orientation and positioning opportunities
- Telescopic width adjustment for cassettes/image receptors from 24.5 cm wide up to 53.5 cm wide
- Holds portable DR Panels and CR/film cassettes from 24 x 30 cm to 35 x 43 cm
- Can hold full leg/spine image receptors of any length
- Counterbalance mechanism included for effortless raising or lowering
- Overhangs table or trolley by up to 62 cm
- Accepts cassette and image receptors up to 30 mm depth
- Castors are fitted with guards to prevent the pedestal running over cables
- Heavy base and low center of gravity gives added stability
- Smooth easy to clean hardwearing surfaces
These versatile Kenex holders can be used with portable DR panels, CR, DR and film cassettes/grids. Telescopic width adjustment allows for cassettes/image receptors from 24.5 cm wide up to 53.5 cm wide and up to 3 cm thick. They roll smoothly on large quick locking castors and facilitate examinations in accident & emergency departments, operating rooms, and radiographic rooms. The heavy duty base gives a low centre of gravity, which helps provide a precise, stable, and safe imaging platform. Vertical movements are counterbalanced for simple and quick height adjustments. The holder is particularly suitable for cross-table views, sometimes with the DR panel or cassette positioned slightly below the table top to eliminate image cut-off. It also assists in acquiring fast skyline views of the patellar, or effective views of the shoulder with the patient on the table or in a chair. The sides of the holder can be quickly extended or retracted to secure different sizes. These telescopic adjustments present a compact platform with no protruding parts. The holder can be turned, tilted, and orientated to suit any desired examination position. It can therefore be placed above, beside, below, or beneath a table or trolley. It is adjustable for height from floor level to 129 cm (measured from the lower edge of the DR panel or cassette) and can overhang the X-ray or operating table by up to 62 cm.
- Stable and compact design
- Unlimited orientation and positioning opportunities
- Telescopic width adjustment for cassettes/image receptors from 24.5 cm wide up to 53.5 cm wide
- Holds portable DR Panels and CR/film cassettes from 24 x 30 cm to 35 x 43 cm
- Can hold full leg/spine image receptors of any length
- Counterbalance mechanism included for effortless raising or lowering
- Overhangs table or trolley by up to 62 cm
- Accepts cassette and image receptors up to 30 mm depth
- Castors are fitted with guards to prevent the pedestal running over cables
- Heavy base and low center of gravity gives added stability
- Smooth easy to clean hardwearing surfaces
- Heavy base and low center of gravity gives added stability
- Stable and compact design
- Smooth easy to clean hardwearing surfaces
- Unlimited orientation and positioning opportunities
- Telescopic width adjustment for cassettes/image receptors from 24.5 cm wide up to 53.5 cm wide
- Holds portable DR Panels and CR/film cassettes from 24 x 30 cm to 35 x 43 cm
- Can hold full leg/spine image receptors of any length
- Counterbalance mechanism included for effortless raising or lowering
- Overhangs table or trolley by up to 62 cm
- Accepts cassette and image receptors up to 30 mm depth
- Castors are fitted with guards to prevent the pedestal running over cables
These versatile Kenex holders can be used with portable DR panels, CR, DR and film cassettes/grids. Telescopic width adjustment allows for cassettes/image receptors from 24.5 cm wide up to 53.5 cm wide and up to 3 cm thick. They roll smoothly on large quick locking castors and facilitate examinations in accident & emergency departments, operating rooms, and radiographic rooms. The heavy duty base gives a low centre of gravity, which helps provide a precise, stable, and safe imaging platform. Vertical movements are counterbalanced for simple and quick height adjustments. The holder is particularly suitable for cross-table views, sometimes with the DR panel or cassette positioned slightly below the table top to eliminate image cut-off. It also assists in acquiring fast skyline views of the patellar, or effective views of the shoulder with the patient on the table or in a chair. The sides of the holder can be quickly extended or retracted to secure different sizes. These telescopic adjustments present a compact platform with no protruding parts. The holder can be turned, tilted, and orientated to suit any desired examination position. It can therefore be placed above, beside, below, or beneath a table or trolley. It is adjustable for height from floor level to 129 cm (measured from the lower edge of the DR panel or cassette) and can overhang the X-ray or operating table by up to 62 cm.
- Stable and compact design
- Unlimited orientation and positioning opportunities
- Telescopic width adjustment for cassettes/image receptors from 24.5 cm wide up to 53.5 cm wide
- Holds portable DR Panels and CR/film cassettes from 24 x 30 cm to 35 x 43 cm
- Can hold full leg/spine image receptors of any length
- Counterbalance mechanism included for effortless raising or lowering
- Overhangs table or trolley by up to 62 cm
- Accepts cassette and image receptors up to 30 mm depth
- Castors are fitted with guards to prevent the pedestal running over cables
- Heavy base and low center of gravity gives added stability
- Smooth easy to clean hardwearing surfaces