OEM#: IRB2016New OEM Original Outright
INNER RING FOR SHELL TYPE NEEDLE ROLLER BEARING INCH, 1-1/4 BORE, 1-1/2 OD, 25.78MM WIDTH by IKO International
Your price:
$27.89 each
OEM#: IRB2016INNER RING FOR SHELL TYPE NEEDLE ROLLER BEARING INCH, 1-1/4 BORE, 1-1/2 OD, 25.78MM WIDTH by IKO International
New OEM Original Outright
Your price:
$27.89 each
Asset Information
Must purchase minimum of 3
Are you an existing customer? Sign in to access your account.
ADD TO LIST
Product Overview
IKO Inner Ring for Shell Type Needle Roller Bearing INCH, 1-1/4 Bore, 1-1/2 OD, 25.78mm Width, Part# IRB2016
IKO Inner Rings are heat-treated and finished by grinding to obtain rigidity and accuracy.
Use IKO Inner Rings when shafts cannot be hardened to HRC 58 to 64 and cannot obtain 0.2μmRa or less surface finish.
IKO Inner Rings are heat-treated and finished by grinding to obtain rigidity and accuracy.
Use IKO Inner Rings when shafts cannot be hardened to HRC 58 to 64 and cannot obtain 0.2μmRa or less surface finish.
Technical Specs
P/N: IRB2016 Key Specs
Item
INNER RING FOR SHELL TYPE NEEDLE ROLLER BEARING INCH, 1-1/4 BORE, 1-1/2 OD, 25.78MM WIDTH
OEM
IKO International
OEM #
IRB2016
Condition
New OEM Original
Returnable
No
Warranty
Mfr Warranty
Appropriate Outer Ring
BA2416ZOH, YB2416
Bore (D) (mm/in)
31.750 (1-1/4)
Bore Tolerance (mm)
+0 / -0.013
Country of Origin
Japan
Maximum Shaft Shoulder (da) (mm)
37.1
Minimum Inner Ring Corner Radius (mm)
0.6
Minimum Shaft Shoulder (da) (mm)
37
OD (F) (mm (in))
38.100 (1-1/2)
OD Tolerance (mm)
+0 / -0.013
Width (B) (mm)
25.78
Width Tolerance (mm)
+0 / -0.250
IKO Inner Ring for Shell Type Needle Roller Bearing INCH, 1-1/4 Bore, 1-1/2 OD, 25.78mm Width, Part# IRB2016
IKO Inner Rings are heat-treated and finished by grinding to obtain rigidity and accuracy.
Use IKO Inner Rings when shafts cannot be hardened to HRC 58 to 64 and cannot obtain 0.2μmRa or less surface finish.
IKO Inner Rings are heat-treated and finished by grinding to obtain rigidity and accuracy.
Use IKO Inner Rings when shafts cannot be hardened to HRC 58 to 64 and cannot obtain 0.2μmRa or less surface finish.
Product Overview
IKO Inner Ring for Shell Type Needle Roller Bearing INCH, 1-1/4 Bore, 1-1/2 OD, 25.78mm Width, Part# IRB2016
IKO Inner Rings are heat-treated and finished by grinding to obtain rigidity and accuracy.
Use IKO Inner Rings when shafts cannot be hardened to HRC 58 to 64 and cannot obtain 0.2μmRa or less surface finish.
IKO Inner Rings are heat-treated and finished by grinding to obtain rigidity and accuracy.
Use IKO Inner Rings when shafts cannot be hardened to HRC 58 to 64 and cannot obtain 0.2μmRa or less surface finish.
Technical Specs
P/N: IRB2016 Key Specs
Item
INNER RING FOR SHELL TYPE NEEDLE ROLLER BEARING INCH, 1-1/4 BORE, 1-1/2 OD, 25.78MM WIDTH
OEM
IKO International
OEM #
IRB2016
Condition
New OEM Original
Returnable
No
Warranty
Mfr Warranty
Appropriate Outer Ring
BA2416ZOH, YB2416
Bore (D) (mm/in)
31.750 (1-1/4)
Bore Tolerance (mm)
+0 / -0.013
Country of Origin
Japan
Maximum Shaft Shoulder (da) (mm)
37.1
Minimum Inner Ring Corner Radius (mm)
0.6
Minimum Shaft Shoulder (da) (mm)
37
OD (F) (mm (in))
38.100 (1-1/2)
OD Tolerance (mm)
+0 / -0.013
Width (B) (mm)
25.78
Width Tolerance (mm)
+0 / -0.250
IKO Inner Ring for Shell Type Needle Roller Bearing INCH, 1-1/4 Bore, 1-1/2 OD, 25.78mm Width, Part# IRB2016
IKO Inner Rings are heat-treated and finished by grinding to obtain rigidity and accuracy.
Use IKO Inner Rings when shafts cannot be hardened to HRC 58 to 64 and cannot obtain 0.2μmRa or less surface finish.
IKO Inner Rings are heat-treated and finished by grinding to obtain rigidity and accuracy.
Use IKO Inner Rings when shafts cannot be hardened to HRC 58 to 64 and cannot obtain 0.2μmRa or less surface finish.
Product Overview
IKO Inner Ring for Shell Type Needle Roller Bearing INCH, 1-1/4 Bore, 1-1/2 OD, 25.78mm Width, Part# IRB2016
IKO Inner Rings are heat-treated and finished by grinding to obtain rigidity and accuracy.
Use IKO Inner Rings when shafts cannot be hardened to HRC 58 to 64 and cannot obtain 0.2μmRa or less surface finish.
IKO Inner Rings are heat-treated and finished by grinding to obtain rigidity and accuracy.
Use IKO Inner Rings when shafts cannot be hardened to HRC 58 to 64 and cannot obtain 0.2μmRa or less surface finish.
Technical Specs
P/N: IRB2016 Key Specs
Item
INNER RING FOR SHELL TYPE NEEDLE ROLLER BEARING INCH, 1-1/4 BORE, 1-1/2 OD, 25.78MM WIDTH
OEM
IKO International
OEM #
IRB2016
Condition
New OEM Original
Returnable
No
Warranty
Mfr Warranty
Appropriate Outer Ring
BA2416ZOH, YB2416
Bore (D) (mm/in)
31.750 (1-1/4)
Bore Tolerance (mm)
+0 / -0.013
Country of Origin
Japan
Maximum Shaft Shoulder (da) (mm)
37.1
Minimum Inner Ring Corner Radius (mm)
0.6
Minimum Shaft Shoulder (da) (mm)
37
OD (F) (mm (in))
38.100 (1-1/2)
OD Tolerance (mm)
+0 / -0.013
Width (B) (mm)
25.78
Width Tolerance (mm)
+0 / -0.250
IKO Inner Ring for Shell Type Needle Roller Bearing INCH, 1-1/4 Bore, 1-1/2 OD, 25.78mm Width, Part# IRB2016
IKO Inner Rings are heat-treated and finished by grinding to obtain rigidity and accuracy.
Use IKO Inner Rings when shafts cannot be hardened to HRC 58 to 64 and cannot obtain 0.2μmRa or less surface finish.
IKO Inner Rings are heat-treated and finished by grinding to obtain rigidity and accuracy.
Use IKO Inner Rings when shafts cannot be hardened to HRC 58 to 64 and cannot obtain 0.2μmRa or less surface finish.