OEM#: MCI-10-01New OEM Original Outright
5/8" ID DOUBLE FLANGED SHEET METAL CLIP BEARING M250 FOR .040/.075 SHEET METAL by igus
Your price:
$4.99 each
OEM#: MCI-10-015/8" ID DOUBLE FLANGED SHEET METAL CLIP BEARING M250 FOR .040/.075 SHEET METAL by igus
New OEM Original Outright
Your price:
$4.99 each
Asset Information
Are you an existing customer? Sign in to access your account.
ADD TO LIST
Product Overview
5/8" ID Double Flanged Sheet Metal Clip Bearing M250 for .040/.075 Sheet Metal
iglide® clip bearings are designed specifically for putting shafts through sheet metal plates. For this reason, the bearings have flanges located on both ends. The bearings are secured in the sheet metal plate on both sides after installation. The clip bearings are slit at an angle, so installation of the bearings is possible from one side. After installation, the bearing opens and forms a lining for the bore hole in the metal plate. The shaft prevents the clip bearing from detaching from the housing. Even during axial movement, the bearing remains secured in the housing. In addition, the lateral slit can compensate for bearing expansions due to temperature or moisture. During expansion, the slit width decreases, and changes so the bearing clearance is minimized. The flange diameter on the smaller side is made to ensure that housings with larger tolerances can be properly secured.
iglide® clip bearings are designed specifically for putting shafts through sheet metal plates. For this reason, the bearings have flanges located on both ends. The bearings are secured in the sheet metal plate on both sides after installation. The clip bearings are slit at an angle, so installation of the bearings is possible from one side. After installation, the bearing opens and forms a lining for the bore hole in the metal plate. The shaft prevents the clip bearing from detaching from the housing. Even during axial movement, the bearing remains secured in the housing. In addition, the lateral slit can compensate for bearing expansions due to temperature or moisture. During expansion, the slit width decreases, and changes so the bearing clearance is minimized. The flange diameter on the smaller side is made to ensure that housings with larger tolerances can be properly secured.
- Secured with double-flange design
- Custom dimensions are possible
- Lightweight
- Maintenance-free and self-lubricating
- Good wear resistance
- Smooth operation
- Suitable for both rotational and linear movements
- Expansion possible through slit design
- For sheet metal thicknesses of .040-.135 inches (2mm, 3mm and 4mm)
- Material: iglide® M250
Technical Specs
P/N: MCI-10-01 Key Specs
Item
5/8" ID DOUBLE FLANGED SHEET METAL CLIP BEARING M250 FOR .040/.075 SHEET METAL
OEM
igus
OEM #
MCI-10-01
Condition
New OEM Original
Returnable
No
Warranty
Mfr Warranty
Color
Grey
Construction
Polymer
Dimension B1
0.138
Dimension D1
0.625
Dimension D2
0.6875
Dimension D3
0.71875
Dimension D4
0.875
Dimension S
0.032
Id In Housing
0.626
Manufacturer Name
igus, Inc.
Max Psi
3,400
Recommended Hb Max
0.6981
Recommended Hb Min
0.6875
Recommended Shaft Size Max
0.625
Recommended Shaft Size Min
0.624
Recommended Sheet Metal Thickness
0.040/0.075
5/8" ID Double Flanged Sheet Metal Clip Bearing M250 for .040/.075 Sheet Metal
iglide® clip bearings are designed specifically for putting shafts through sheet metal plates. For this reason, the bearings have flanges located on both ends. The bearings are secured in the sheet metal plate on both sides after installation. The clip bearings are slit at an angle, so installation of the bearings is possible from one side. After installation, the bearing opens and forms a lining for the bore hole in the metal plate. The shaft prevents the clip bearing from detaching from the housing. Even during axial movement, the bearing remains secured in the housing. In addition, the lateral slit can compensate for bearing expansions due to temperature or moisture. During expansion, the slit width decreases, and changes so the bearing clearance is minimized. The flange diameter on the smaller side is made to ensure that housings with larger tolerances can be properly secured.
iglide® clip bearings are designed specifically for putting shafts through sheet metal plates. For this reason, the bearings have flanges located on both ends. The bearings are secured in the sheet metal plate on both sides after installation. The clip bearings are slit at an angle, so installation of the bearings is possible from one side. After installation, the bearing opens and forms a lining for the bore hole in the metal plate. The shaft prevents the clip bearing from detaching from the housing. Even during axial movement, the bearing remains secured in the housing. In addition, the lateral slit can compensate for bearing expansions due to temperature or moisture. During expansion, the slit width decreases, and changes so the bearing clearance is minimized. The flange diameter on the smaller side is made to ensure that housings with larger tolerances can be properly secured.
- Secured with double-flange design
- Custom dimensions are possible
- Lightweight
- Maintenance-free and self-lubricating
- Good wear resistance
- Smooth operation
- Suitable for both rotational and linear movements
- Expansion possible through slit design
- For sheet metal thicknesses of .040-.135 inches (2mm, 3mm and 4mm)
- Material: iglide® M250
Product Overview
5/8" ID Double Flanged Sheet Metal Clip Bearing M250 for .040/.075 Sheet Metal
iglide® clip bearings are designed specifically for putting shafts through sheet metal plates. For this reason, the bearings have flanges located on both ends. The bearings are secured in the sheet metal plate on both sides after installation. The clip bearings are slit at an angle, so installation of the bearings is possible from one side. After installation, the bearing opens and forms a lining for the bore hole in the metal plate. The shaft prevents the clip bearing from detaching from the housing. Even during axial movement, the bearing remains secured in the housing. In addition, the lateral slit can compensate for bearing expansions due to temperature or moisture. During expansion, the slit width decreases, and changes so the bearing clearance is minimized. The flange diameter on the smaller side is made to ensure that housings with larger tolerances can be properly secured.
iglide® clip bearings are designed specifically for putting shafts through sheet metal plates. For this reason, the bearings have flanges located on both ends. The bearings are secured in the sheet metal plate on both sides after installation. The clip bearings are slit at an angle, so installation of the bearings is possible from one side. After installation, the bearing opens and forms a lining for the bore hole in the metal plate. The shaft prevents the clip bearing from detaching from the housing. Even during axial movement, the bearing remains secured in the housing. In addition, the lateral slit can compensate for bearing expansions due to temperature or moisture. During expansion, the slit width decreases, and changes so the bearing clearance is minimized. The flange diameter on the smaller side is made to ensure that housings with larger tolerances can be properly secured.
- Secured with double-flange design
- Custom dimensions are possible
- Lightweight
- Maintenance-free and self-lubricating
- Good wear resistance
- Smooth operation
- Suitable for both rotational and linear movements
- Expansion possible through slit design
- For sheet metal thicknesses of .040-.135 inches (2mm, 3mm and 4mm)
- Material: iglide® M250
Technical Specs
P/N: MCI-10-01 Key Specs
Item
5/8" ID DOUBLE FLANGED SHEET METAL CLIP BEARING M250 FOR .040/.075 SHEET METAL
OEM
igus
OEM #
MCI-10-01
Condition
New OEM Original
Returnable
No
Warranty
Mfr Warranty
Color
Grey
Construction
Polymer
Dimension B1
0.138
Dimension D1
0.625
Dimension D2
0.6875
Dimension D3
0.71875
Dimension D4
0.875
Dimension S
0.032
Id In Housing
0.626
Manufacturer Name
igus, Inc.
Max Psi
3,400
Recommended Hb Max
0.6981
Recommended Hb Min
0.6875
Recommended Shaft Size Max
0.625
Recommended Shaft Size Min
0.624
Recommended Sheet Metal Thickness
0.040/0.075
5/8" ID Double Flanged Sheet Metal Clip Bearing M250 for .040/.075 Sheet Metal
iglide® clip bearings are designed specifically for putting shafts through sheet metal plates. For this reason, the bearings have flanges located on both ends. The bearings are secured in the sheet metal plate on both sides after installation. The clip bearings are slit at an angle, so installation of the bearings is possible from one side. After installation, the bearing opens and forms a lining for the bore hole in the metal plate. The shaft prevents the clip bearing from detaching from the housing. Even during axial movement, the bearing remains secured in the housing. In addition, the lateral slit can compensate for bearing expansions due to temperature or moisture. During expansion, the slit width decreases, and changes so the bearing clearance is minimized. The flange diameter on the smaller side is made to ensure that housings with larger tolerances can be properly secured.
iglide® clip bearings are designed specifically for putting shafts through sheet metal plates. For this reason, the bearings have flanges located on both ends. The bearings are secured in the sheet metal plate on both sides after installation. The clip bearings are slit at an angle, so installation of the bearings is possible from one side. After installation, the bearing opens and forms a lining for the bore hole in the metal plate. The shaft prevents the clip bearing from detaching from the housing. Even during axial movement, the bearing remains secured in the housing. In addition, the lateral slit can compensate for bearing expansions due to temperature or moisture. During expansion, the slit width decreases, and changes so the bearing clearance is minimized. The flange diameter on the smaller side is made to ensure that housings with larger tolerances can be properly secured.
- Secured with double-flange design
- Custom dimensions are possible
- Lightweight
- Maintenance-free and self-lubricating
- Good wear resistance
- Smooth operation
- Suitable for both rotational and linear movements
- Expansion possible through slit design
- For sheet metal thicknesses of .040-.135 inches (2mm, 3mm and 4mm)
- Material: iglide® M250
Product Overview
5/8" ID Double Flanged Sheet Metal Clip Bearing M250 for .040/.075 Sheet Metal
iglide® clip bearings are designed specifically for putting shafts through sheet metal plates. For this reason, the bearings have flanges located on both ends. The bearings are secured in the sheet metal plate on both sides after installation. The clip bearings are slit at an angle, so installation of the bearings is possible from one side. After installation, the bearing opens and forms a lining for the bore hole in the metal plate. The shaft prevents the clip bearing from detaching from the housing. Even during axial movement, the bearing remains secured in the housing. In addition, the lateral slit can compensate for bearing expansions due to temperature or moisture. During expansion, the slit width decreases, and changes so the bearing clearance is minimized. The flange diameter on the smaller side is made to ensure that housings with larger tolerances can be properly secured.
iglide® clip bearings are designed specifically for putting shafts through sheet metal plates. For this reason, the bearings have flanges located on both ends. The bearings are secured in the sheet metal plate on both sides after installation. The clip bearings are slit at an angle, so installation of the bearings is possible from one side. After installation, the bearing opens and forms a lining for the bore hole in the metal plate. The shaft prevents the clip bearing from detaching from the housing. Even during axial movement, the bearing remains secured in the housing. In addition, the lateral slit can compensate for bearing expansions due to temperature or moisture. During expansion, the slit width decreases, and changes so the bearing clearance is minimized. The flange diameter on the smaller side is made to ensure that housings with larger tolerances can be properly secured.
- Secured with double-flange design
- Custom dimensions are possible
- Lightweight
- Maintenance-free and self-lubricating
- Good wear resistance
- Smooth operation
- Suitable for both rotational and linear movements
- Expansion possible through slit design
- For sheet metal thicknesses of .040-.135 inches (2mm, 3mm and 4mm)
- Material: iglide® M250
Technical Specs
P/N: MCI-10-01 Key Specs
Item
5/8" ID DOUBLE FLANGED SHEET METAL CLIP BEARING M250 FOR .040/.075 SHEET METAL
OEM
igus
OEM #
MCI-10-01
Condition
New OEM Original
Returnable
No
Warranty
Mfr Warranty
Color
Grey
Construction
Polymer
Dimension B1
0.138
Dimension D1
0.625
Dimension D2
0.6875
Dimension D3
0.71875
Dimension D4
0.875
Dimension S
0.032
Id In Housing
0.626
Manufacturer Name
igus, Inc.
Max Psi
3,400
Recommended Hb Max
0.6981
Recommended Hb Min
0.6875
Recommended Shaft Size Max
0.625
Recommended Shaft Size Min
0.624
Recommended Sheet Metal Thickness
0.040/0.075
5/8" ID Double Flanged Sheet Metal Clip Bearing M250 for .040/.075 Sheet Metal
iglide® clip bearings are designed specifically for putting shafts through sheet metal plates. For this reason, the bearings have flanges located on both ends. The bearings are secured in the sheet metal plate on both sides after installation. The clip bearings are slit at an angle, so installation of the bearings is possible from one side. After installation, the bearing opens and forms a lining for the bore hole in the metal plate. The shaft prevents the clip bearing from detaching from the housing. Even during axial movement, the bearing remains secured in the housing. In addition, the lateral slit can compensate for bearing expansions due to temperature or moisture. During expansion, the slit width decreases, and changes so the bearing clearance is minimized. The flange diameter on the smaller side is made to ensure that housings with larger tolerances can be properly secured.
iglide® clip bearings are designed specifically for putting shafts through sheet metal plates. For this reason, the bearings have flanges located on both ends. The bearings are secured in the sheet metal plate on both sides after installation. The clip bearings are slit at an angle, so installation of the bearings is possible from one side. After installation, the bearing opens and forms a lining for the bore hole in the metal plate. The shaft prevents the clip bearing from detaching from the housing. Even during axial movement, the bearing remains secured in the housing. In addition, the lateral slit can compensate for bearing expansions due to temperature or moisture. During expansion, the slit width decreases, and changes so the bearing clearance is minimized. The flange diameter on the smaller side is made to ensure that housings with larger tolerances can be properly secured.
- Secured with double-flange design
- Custom dimensions are possible
- Lightweight
- Maintenance-free and self-lubricating
- Good wear resistance
- Smooth operation
- Suitable for both rotational and linear movements
- Expansion possible through slit design
- For sheet metal thicknesses of .040-.135 inches (2mm, 3mm and 4mm)
- Material: iglide® M250