OEM#: GC-ND-POE-DTENew OEM Original Outright
SERIAL TO POWER OVER ETHERNET (POE) CABLE by Grid Connect
Your price:
$182.53 each
OEM#: GC-ND-POE-DTESERIAL TO POWER OVER ETHERNET (POE) CABLE by Grid Connect
New OEM Original Outright
Your price:
$182.53 each
Asset Information
Are you an existing customer? Sign in to access your account.
ADD TO LIST
Product Overview
The NetDirect Power Over Ethernet (PoE) is a self-powered serial to ethernet cable that converts your RS232, RS422, or RS485 port into a network PoE Ethernet port | The NetDirect PoE Device Server is a small compact cable that allows you to simply convert your RS232, RS422 or RS485 device to an Ethernet port. This conversion allows you to put you devices on a network and have access to them over a wide range via the Internet or local Ethernet network | The NetDirect can be purchased in several different serial configurations. The serial port can be a DTE (male pins) or a DCE (female no pins). Included in the box is a breakout which allows you to wire in RS485 and RS422 into the DB9 Connector on the NetDirect | As a Device Server, the NetDirect is a powerful cable converter that converts your serial port to an Ethernet Port. The NetDirect supports all the standard baud rates from 300 to 921.6K baud and the various data formats, 7 or 8 data bits, 1 or 2 stop bits, parity of none, even, odd, mark, hardware flow control using RTS/CTS signals or software control using XON/XOFF and modem controls signals DTR/DSR/DCD. The NetDirect has 1500 volts VAC of isolation the Ethernet port and 15KV of ESD protection on the serial port | The NetDirect is easily configured using an Install and COM port redirection software. The install program finds the NetDirect on the network and allows you to configure the port settings. The COM port director software allows you to convert a physical serial port on your PC to a virtual serial port to be used on a network
Features
- Supports RS232/RS422/RS485
- Characters T: 7 or 8 data bits
- DB9 DCE (female) and DB9 DTE (male) Versions
- Serial baud rates up to 921.6K
- 128.192/256 bit AES Encryption
- Plastic housing
- 10/100M Ethernet Connection
- OEM versions available for small minimum quantity
- Includes CD with Manuals, PC Setup and Virtual COM Port Redirector Software
- Supports Windows 7/Vista/XP/Server (32/64 bit)
Technical Specs
P/N: GC-ND-POE-DTE Key Specs
Item
SERIAL TO POWER OVER ETHERNET (POE) CABLE
OEM
Grid Connect
OEM #
GC-ND-POE-DTE
Condition
New OEM Original
Returnable
No
Warranty
Mfr Warranty
Body Dimensions
86.6 mm x 30 mm x 29 mm
Connectors
Serial Connector - DB9 - DCE (female) or DB9 - DTE (male) and custom cables/connectors (call) also available, Network Connector, RJ45
Data Rate
up to 921,600 bps
Flow Control
XON/XOFF, RTS/CTS
Humidity
0 to 90% non-condensing humidity
Indicators LED
TX, RX , Status
Interfaces
Ethernet 10Base-T or 100Base-TX (Auto-Sensing)
Isolation
Ethernet: 1500VAC, Serial: 15KV ESD protection
Management
SNMP, Telnet, serial, internal web server, and Microsoft Windows-based utility configuration
Modem Control
DTR, DSR/DCD
Power
PoE 802.3af, USB input voltage 5VDC
Protocols
TCP/IP, UDP/IP, ARP, IMCP, SNMP, TFTP, Telnet, DHCP, BOOTP, HTTP, and AutoIP
Security/Protection
128/192/256 bit AES Encryption
Serial Interfaces
374373369
Serial Type Config
401
Serial Types
372370371
Software
Windows-based Installer and Virtual Comm Port Redirector, Support for Windows 7/Vista/XP/Server (32/64 bit)
Stop Bits
1 or 2
Temperature Range
'-40 to +70 deg C (-40 to + 158 deg F)
Equivalents
The NetDirect Power Over Ethernet (PoE) is a self-powered serial to ethernet cable that converts your RS232, RS422, or RS485 port into a network PoE Ethernet port | The NetDirect PoE Device Server is a small compact cable that allows you to simply convert your RS232, RS422 or RS485 device to an Ethernet port. This conversion allows you to put you devices on a network and have access to them over a wide range via the Internet or local Ethernet network | The NetDirect can be purchased in several different serial configurations. The serial port can be a DTE (male pins) or a DCE (female no pins). Included in the box is a breakout which allows you to wire in RS485 and RS422 into the DB9 Connector on the NetDirect | As a Device Server, the NetDirect is a powerful cable converter that converts your serial port to an Ethernet Port. The NetDirect supports all the standard baud rates from 300 to 921.6K baud and the various data formats, 7 or 8 data bits, 1 or 2 stop bits, parity of none, even, odd, mark, hardware flow control using RTS/CTS signals or software control using XON/XOFF and modem controls signals DTR/DSR/DCD. The NetDirect has 1500 volts VAC of isolation the Ethernet port and 15KV of ESD protection on the serial port | The NetDirect is easily configured using an Install and COM port redirection software. The install program finds the NetDirect on the network and allows you to configure the port settings. The COM port director software allows you to convert a physical serial port on your PC to a virtual serial port to be used on a network
- GC-ND-POE: Grid Connect: Item Replacement
Product Overview
The NetDirect Power Over Ethernet (PoE) is a self-powered serial to ethernet cable that converts your RS232, RS422, or RS485 port into a network PoE Ethernet port | The NetDirect PoE Device Server is a small compact cable that allows you to simply convert your RS232, RS422 or RS485 device to an Ethernet port. This conversion allows you to put you devices on a network and have access to them over a wide range via the Internet or local Ethernet network | The NetDirect can be purchased in several different serial configurations. The serial port can be a DTE (male pins) or a DCE (female no pins). Included in the box is a breakout which allows you to wire in RS485 and RS422 into the DB9 Connector on the NetDirect | As a Device Server, the NetDirect is a powerful cable converter that converts your serial port to an Ethernet Port. The NetDirect supports all the standard baud rates from 300 to 921.6K baud and the various data formats, 7 or 8 data bits, 1 or 2 stop bits, parity of none, even, odd, mark, hardware flow control using RTS/CTS signals or software control using XON/XOFF and modem controls signals DTR/DSR/DCD. The NetDirect has 1500 volts VAC of isolation the Ethernet port and 15KV of ESD protection on the serial port | The NetDirect is easily configured using an Install and COM port redirection software. The install program finds the NetDirect on the network and allows you to configure the port settings. The COM port director software allows you to convert a physical serial port on your PC to a virtual serial port to be used on a network
Features
- Supports RS232/RS422/RS485
- Characters T: 7 or 8 data bits
- DB9 DCE (female) and DB9 DTE (male) Versions
- Serial baud rates up to 921.6K
- 128.192/256 bit AES Encryption
- Plastic housing
- 10/100M Ethernet Connection
- OEM versions available for small minimum quantity
- Includes CD with Manuals, PC Setup and Virtual COM Port Redirector Software
- Supports Windows 7/Vista/XP/Server (32/64 bit)
Technical Specs
P/N: GC-ND-POE-DTE Key Specs
Item
SERIAL TO POWER OVER ETHERNET (POE) CABLE
OEM
Grid Connect
OEM #
GC-ND-POE-DTE
Condition
New OEM Original
Returnable
No
Warranty
Mfr Warranty
Body Dimensions
86.6 mm x 30 mm x 29 mm
Connectors
Serial Connector - DB9 - DCE (female) or DB9 - DTE (male) and custom cables/connectors (call) also available, Network Connector, RJ45
Data Rate
up to 921,600 bps
Flow Control
XON/XOFF, RTS/CTS
Humidity
0 to 90% non-condensing humidity
Indicators LED
TX, RX , Status
Interfaces
Ethernet 10Base-T or 100Base-TX (Auto-Sensing)
Isolation
Ethernet: 1500VAC, Serial: 15KV ESD protection
Management
SNMP, Telnet, serial, internal web server, and Microsoft Windows-based utility configuration
Modem Control
DTR, DSR/DCD
Power
PoE 802.3af, USB input voltage 5VDC
Protocols
TCP/IP, UDP/IP, ARP, IMCP, SNMP, TFTP, Telnet, DHCP, BOOTP, HTTP, and AutoIP
Security/Protection
128/192/256 bit AES Encryption
Serial Interfaces
374373369
Serial Type Config
401
Serial Types
372370371
Software
Windows-based Installer and Virtual Comm Port Redirector, Support for Windows 7/Vista/XP/Server (32/64 bit)
Stop Bits
1 or 2
Temperature Range
'-40 to +70 deg C (-40 to + 158 deg F)
Equivalents
The NetDirect Power Over Ethernet (PoE) is a self-powered serial to ethernet cable that converts your RS232, RS422, or RS485 port into a network PoE Ethernet port | The NetDirect PoE Device Server is a small compact cable that allows you to simply convert your RS232, RS422 or RS485 device to an Ethernet port. This conversion allows you to put you devices on a network and have access to them over a wide range via the Internet or local Ethernet network | The NetDirect can be purchased in several different serial configurations. The serial port can be a DTE (male pins) or a DCE (female no pins). Included in the box is a breakout which allows you to wire in RS485 and RS422 into the DB9 Connector on the NetDirect | As a Device Server, the NetDirect is a powerful cable converter that converts your serial port to an Ethernet Port. The NetDirect supports all the standard baud rates from 300 to 921.6K baud and the various data formats, 7 or 8 data bits, 1 or 2 stop bits, parity of none, even, odd, mark, hardware flow control using RTS/CTS signals or software control using XON/XOFF and modem controls signals DTR/DSR/DCD. The NetDirect has 1500 volts VAC of isolation the Ethernet port and 15KV of ESD protection on the serial port | The NetDirect is easily configured using an Install and COM port redirection software. The install program finds the NetDirect on the network and allows you to configure the port settings. The COM port director software allows you to convert a physical serial port on your PC to a virtual serial port to be used on a network
- GC-ND-POE: Grid Connect: Item Replacement
Product Overview
The NetDirect Power Over Ethernet (PoE) is a self-powered serial to ethernet cable that converts your RS232, RS422, or RS485 port into a network PoE Ethernet port | The NetDirect PoE Device Server is a small compact cable that allows you to simply convert your RS232, RS422 or RS485 device to an Ethernet port. This conversion allows you to put you devices on a network and have access to them over a wide range via the Internet or local Ethernet network | The NetDirect can be purchased in several different serial configurations. The serial port can be a DTE (male pins) or a DCE (female no pins). Included in the box is a breakout which allows you to wire in RS485 and RS422 into the DB9 Connector on the NetDirect | As a Device Server, the NetDirect is a powerful cable converter that converts your serial port to an Ethernet Port. The NetDirect supports all the standard baud rates from 300 to 921.6K baud and the various data formats, 7 or 8 data bits, 1 or 2 stop bits, parity of none, even, odd, mark, hardware flow control using RTS/CTS signals or software control using XON/XOFF and modem controls signals DTR/DSR/DCD. The NetDirect has 1500 volts VAC of isolation the Ethernet port and 15KV of ESD protection on the serial port | The NetDirect is easily configured using an Install and COM port redirection software. The install program finds the NetDirect on the network and allows you to configure the port settings. The COM port director software allows you to convert a physical serial port on your PC to a virtual serial port to be used on a network
Features
- Supports RS232/RS422/RS485
- Characters T: 7 or 8 data bits
- DB9 DCE (female) and DB9 DTE (male) Versions
- Serial baud rates up to 921.6K
- 128.192/256 bit AES Encryption
- Plastic housing
- 10/100M Ethernet Connection
- OEM versions available for small minimum quantity
- Includes CD with Manuals, PC Setup and Virtual COM Port Redirector Software
- Supports Windows 7/Vista/XP/Server (32/64 bit)
Technical Specs
P/N: GC-ND-POE-DTE Key Specs
Item
SERIAL TO POWER OVER ETHERNET (POE) CABLE
OEM
Grid Connect
OEM #
GC-ND-POE-DTE
Condition
New OEM Original
Returnable
No
Warranty
Mfr Warranty
Body Dimensions
86.6 mm x 30 mm x 29 mm
Connectors
Serial Connector - DB9 - DCE (female) or DB9 - DTE (male) and custom cables/connectors (call) also available, Network Connector, RJ45
Data Rate
up to 921,600 bps
Flow Control
XON/XOFF, RTS/CTS
Humidity
0 to 90% non-condensing humidity
Indicators LED
TX, RX , Status
Interfaces
Ethernet 10Base-T or 100Base-TX (Auto-Sensing)
Isolation
Ethernet: 1500VAC, Serial: 15KV ESD protection
Management
SNMP, Telnet, serial, internal web server, and Microsoft Windows-based utility configuration
Modem Control
DTR, DSR/DCD
Power
PoE 802.3af, USB input voltage 5VDC
Protocols
TCP/IP, UDP/IP, ARP, IMCP, SNMP, TFTP, Telnet, DHCP, BOOTP, HTTP, and AutoIP
Security/Protection
128/192/256 bit AES Encryption
Serial Interfaces
374373369
Serial Type Config
401
Serial Types
372370371
Software
Windows-based Installer and Virtual Comm Port Redirector, Support for Windows 7/Vista/XP/Server (32/64 bit)
Stop Bits
1 or 2
Temperature Range
'-40 to +70 deg C (-40 to + 158 deg F)
Equivalents
The NetDirect Power Over Ethernet (PoE) is a self-powered serial to ethernet cable that converts your RS232, RS422, or RS485 port into a network PoE Ethernet port | The NetDirect PoE Device Server is a small compact cable that allows you to simply convert your RS232, RS422 or RS485 device to an Ethernet port. This conversion allows you to put you devices on a network and have access to them over a wide range via the Internet or local Ethernet network | The NetDirect can be purchased in several different serial configurations. The serial port can be a DTE (male pins) or a DCE (female no pins). Included in the box is a breakout which allows you to wire in RS485 and RS422 into the DB9 Connector on the NetDirect | As a Device Server, the NetDirect is a powerful cable converter that converts your serial port to an Ethernet Port. The NetDirect supports all the standard baud rates from 300 to 921.6K baud and the various data formats, 7 or 8 data bits, 1 or 2 stop bits, parity of none, even, odd, mark, hardware flow control using RTS/CTS signals or software control using XON/XOFF and modem controls signals DTR/DSR/DCD. The NetDirect has 1500 volts VAC of isolation the Ethernet port and 15KV of ESD protection on the serial port | The NetDirect is easily configured using an Install and COM port redirection software. The install program finds the NetDirect on the network and allows you to configure the port settings. The COM port director software allows you to convert a physical serial port on your PC to a virtual serial port to be used on a network
- GC-ND-POE: Grid Connect: Item Replacement