VAC MODULE REGULATOR KIT by GE Medical Systems Information Technology (GEMSIT)
OEM#: 6700-1225-800VAC MODULE REGULATOR KIT by GE Medical Systems Information Technology (GEMSIT)
Drop Shipped From GE - Not For Export Out Of US
The vacuum regulator module is provided as a part of suction control module which in turn is a part of integrated suction regulator manifold in an anesthesia machine. The vacuum regulator is used to control the suction during Anesthetic Gas Scavenging System (AGSS). It is threaded onto the back of control panel knob present in the panel assembly. Two O-rings (one large and 1 stem) are installed on regulator for sealing purpose. The panel assembly contains knobs which can be manually rotated thus adjusting the suction level in the machine. The panel is installed onto the wall of the machine and connected to an external vacuum source. It is provided as a part of a wide range of anesthesia machines like XR Optima XR220amx, Aespire 7100, Aespire 100, Aespire 7900, ARC Aisys, ARC Aestiva MRI, Anesthesia Other, ARC Aespire View, Avance, MIC Panda™ iRES Warmer, ARC Aespire 7900, Aestiva 7100, ARC Aestiva 3000, Carestation 650c, Avance CS2, Aisys CS2, MIC Giraffe™ OmniBed, Carestation 620 and Aespire View.
Additional Features:
- Resistant to wear and weather
- Resistant to hydrocarbon fuels and petroleum base oils
- Leak proof
- Fast response to changes in suction requirement
- Minute application of lubricant is adequate
- Good tensile strength (O-rings)
The vacuum regulator module is provided as a part of suction control module which in turn is a part of integrated suction regulator manifold in an anesthesia machine. The vacuum regulator is used to control the suction during Anesthetic Gas Scavenging System (AGSS). It is threaded onto the back of control panel knob present in the panel assembly. Two O-rings (one large and 1 stem) are installed on regulator for sealing purpose. The panel assembly contains knobs which can be manually rotated thus adjusting the suction level in the machine. The panel is installed onto the wall of the machine and connected to an external vacuum source. It is provided as a part of a wide range of anesthesia machines like XR Optima XR220amx, Aespire 7100, Aespire 100, Aespire 7900, ARC Aisys, ARC Aestiva MRI, Anesthesia Other, ARC Aespire View, Avance, MIC Panda™ iRES Warmer, ARC Aespire 7900, Aestiva 7100, ARC Aestiva 3000, Carestation 650c, Avance CS2, Aisys CS2, MIC Giraffe™ OmniBed, Carestation 620 and Aespire View.
Additional Features:
The vacuum regulator module is provided as a part of suction control module which in turn is a part of integrated suction regulator manifold in an anesthesia machine. The vacuum regulator is used to control the suction during Anesthetic Gas Scavenging System (AGSS). It is threaded onto the back of control panel knob present in the panel assembly. Two O-rings (one large and 1 stem) are installed on regulator for sealing purpose. The panel assembly contains knobs which can be manually rotated thus adjusting the suction level in the machine. The panel is installed onto the wall of the machine and connected to an external vacuum source. It is provided as a part of a wide range of anesthesia machines like XR Optima XR220amx, Aespire 7100, Aespire 100, Aespire 7900, ARC Aisys, ARC Aestiva MRI, Anesthesia Other, ARC Aespire View, Avance, MIC Panda™ iRES Warmer, ARC Aespire 7900, Aestiva 7100, ARC Aestiva 3000, Carestation 650c, Avance CS2, Aisys CS2, MIC Giraffe™ OmniBed, Carestation 620 and Aespire View.
Additional Features:
- Resistant to wear and weather
- Resistant to hydrocarbon fuels and petroleum base oils
- Leak proof
- Fast response to changes in suction requirement
- Minute application of lubricant is adequate
- Good tensile strength (O-rings)
The vacuum regulator module is provided as a part of suction control module which in turn is a part of integrated suction regulator manifold in an anesthesia machine. The vacuum regulator is used to control the suction during Anesthetic Gas Scavenging System (AGSS). It is threaded onto the back of control panel knob present in the panel assembly. Two O-rings (one large and 1 stem) are installed on regulator for sealing purpose. The panel assembly contains knobs which can be manually rotated thus adjusting the suction level in the machine. The panel is installed onto the wall of the machine and connected to an external vacuum source. It is provided as a part of a wide range of anesthesia machines like XR Optima XR220amx, Aespire 7100, Aespire 100, Aespire 7900, ARC Aisys, ARC Aestiva MRI, Anesthesia Other, ARC Aespire View, Avance, MIC Panda™ iRES Warmer, ARC Aespire 7900, Aestiva 7100, ARC Aestiva 3000, Carestation 650c, Avance CS2, Aisys CS2, MIC Giraffe™ OmniBed, Carestation 620 and Aespire View.
Additional Features:
The vacuum regulator module is provided as a part of suction control module which in turn is a part of integrated suction regulator manifold in an anesthesia machine. The vacuum regulator is used to control the suction during Anesthetic Gas Scavenging System (AGSS). It is threaded onto the back of control panel knob present in the panel assembly. Two O-rings (one large and 1 stem) are installed on regulator for sealing purpose. The panel assembly contains knobs which can be manually rotated thus adjusting the suction level in the machine. The panel is installed onto the wall of the machine and connected to an external vacuum source. It is provided as a part of a wide range of anesthesia machines like XR Optima XR220amx, Aespire 7100, Aespire 100, Aespire 7900, ARC Aisys, ARC Aestiva MRI, Anesthesia Other, ARC Aespire View, Avance, MIC Panda™ iRES Warmer, ARC Aespire 7900, Aestiva 7100, ARC Aestiva 3000, Carestation 650c, Avance CS2, Aisys CS2, MIC Giraffe™ OmniBed, Carestation 620 and Aespire View.
Additional Features:
- Resistant to wear and weather
- Resistant to hydrocarbon fuels and petroleum base oils
- Leak proof
- Fast response to changes in suction requirement
- Minute application of lubricant is adequate
- Good tensile strength (O-rings)
The vacuum regulator module is provided as a part of suction control module which in turn is a part of integrated suction regulator manifold in an anesthesia machine. The vacuum regulator is used to control the suction during Anesthetic Gas Scavenging System (AGSS). It is threaded onto the back of control panel knob present in the panel assembly. Two O-rings (one large and 1 stem) are installed on regulator for sealing purpose. The panel assembly contains knobs which can be manually rotated thus adjusting the suction level in the machine. The panel is installed onto the wall of the machine and connected to an external vacuum source. It is provided as a part of a wide range of anesthesia machines like XR Optima XR220amx, Aespire 7100, Aespire 100, Aespire 7900, ARC Aisys, ARC Aestiva MRI, Anesthesia Other, ARC Aespire View, Avance, MIC Panda™ iRES Warmer, ARC Aespire 7900, Aestiva 7100, ARC Aestiva 3000, Carestation 650c, Avance CS2, Aisys CS2, MIC Giraffe™ OmniBed, Carestation 620 and Aespire View.
Additional Features: