Departments
Solutions
PRO
Browsing History
Main Menu
Batteries
Biomedical
Cables & Sensors
Computers & Electronics
Facilities & Workspaces
Laboratory
Lighting & Bulbs
Medical Imaging
Minor Equipment
On-Site Service
Repair
Training
Shop by OEM
Shop by Model
Main Menu
Provider
Supplier
Government
Partners
GPOs
Resources
About
Main Menu
About PartsSource PRO
On-Demand Parts
On-Demand Service
Repair & Service Agreements
Main Menu
My Account
Orders
Quotes
Depot Repairs
On-Site Service
Exchanges & Returns
Settings
Main Menu
Month over Month Spend
Prior Rebates
Main Menu
My Lists
Create New List
OEM#: 2054858-003New OEM Original Outright
KEYBOARD, LAB PRE ASSEMBLY, BLACK, ENGLISH by GE Medical Systems Information Technology (GEMSIT)
Your price:
$544.86 eachEstimated to ship by 04/18 if ordered before 4:00 PM EST
OEM#: 2054858-003KEYBOARD, LAB PRE ASSEMBLY, BLACK, ENGLISH by GE Medical Systems Information Technology (GEMSIT)
New OEM Original Outright
Your price:
$544.86 each
Estimated to ship by 04/18 if ordered before 4:00 PM EST
Asset Information
Drop Shipped From GE - Not For Export Out Of US
ADD TO LIST
Product Overview
The Keyboard - Black Mac Lab/Cath Lab Pre-Assembly is used in Diagnostic ECG. It consist of 12 yellow keys for comment, ART, AO, LV, LA, PV, PA, RV, PCW, RA, VC, VEN and SP. The F12 key is highlighted in red color for emergency save. The keyboard has 102 keys and is a PS/2 cable type keyboard. The barcode scanner cable must not be connected to the keyboard PS/2 connector when system is powered on. This would cause the system to lock up after the first scan. If this happens, the barcode scanner cable must be replaced. The keyboard LEDs will turn on at Power On and turn off just prior to the floppy disk drive’s LED turning on. These LEDs indicate that the PC/AT system (EPC-9) is functioning properly. The keyboard connector is hot-pluggable. Any standard keyboard can be plugged in without powering down the system or causing keyboard errors. It is used in ARC Aisys, HCS-IT ComboLab IT, MS PDM, HCS-IT CardioLab IT 6.9, Evaluated/Not Applicable XI (Invasive), XV Innova IGS 620 and ComboLab Upgrades.
Additional Features:
Features
- Manufacturer: GE Medical Systems Information Technology (GEMSIT)
- Condition: New OEM Original
- Purchase Type: Outright
- Warranty: 90 Day
- Returnable: No
- 101 keys
- Red key for emergency save
- Cable type
- PS/2 type
Equivalents
- 2054858-003: Marquette (GEMSIT)
Technical Specs
P/N: 2054858-003 Key Specs
Item
KEYBOARD, LAB PRE ASSEMBLY, BLACK, ENGLISH
OEM
GE Medical Systems Information Technology (GEMSIT)
OEM #
2054858-003
Condition
New OEM Original
Returnable
No
Color
Black
The Keyboard - Black Mac Lab/Cath Lab Pre-Assembly is used in Diagnostic ECG. It consist of 12 yellow keys for comment, ART, AO, LV, LA, PV, PA, RV, PCW, RA, VC, VEN and SP. The F12 key is highlighted in red color for emergency save. The keyboard has 102 keys and is a PS/2 cable type keyboard. The barcode scanner cable must not be connected to the keyboard PS/2 connector when system is powered on. This would cause the system to lock up after the first scan. If this happens, the barcode scanner cable must be replaced. The keyboard LEDs will turn on at Power On and turn off just prior to the floppy disk drive’s LED turning on. These LEDs indicate that the PC/AT system (EPC-9) is functioning properly. The keyboard connector is hot-pluggable. Any standard keyboard can be plugged in without powering down the system or causing keyboard errors. It is used in ARC Aisys, HCS-IT ComboLab IT, MS PDM, HCS-IT CardioLab IT 6.9, Evaluated/Not Applicable XI (Invasive), XV Innova IGS 620 and ComboLab Upgrades.
Additional Features:
- 2054858-003: Marquette (GEMSIT)
Product Overview
The Keyboard - Black Mac Lab/Cath Lab Pre-Assembly is used in Diagnostic ECG. It consist of 12 yellow keys for comment, ART, AO, LV, LA, PV, PA, RV, PCW, RA, VC, VEN and SP. The F12 key is highlighted in red color for emergency save. The keyboard has 102 keys and is a PS/2 cable type keyboard. The barcode scanner cable must not be connected to the keyboard PS/2 connector when system is powered on. This would cause the system to lock up after the first scan. If this happens, the barcode scanner cable must be replaced. The keyboard LEDs will turn on at Power On and turn off just prior to the floppy disk drive’s LED turning on. These LEDs indicate that the PC/AT system (EPC-9) is functioning properly. The keyboard connector is hot-pluggable. Any standard keyboard can be plugged in without powering down the system or causing keyboard errors. It is used in ARC Aisys, HCS-IT ComboLab IT, MS PDM, HCS-IT CardioLab IT 6.9, Evaluated/Not Applicable XI (Invasive), XV Innova IGS 620 and ComboLab Upgrades.
Additional Features:
Features
- Manufacturer: GE Medical Systems Information Technology (GEMSIT)
- Condition: New OEM Original
- Purchase Type: Outright
- Warranty: 90 Day
- Returnable: No
- 101 keys
- Red key for emergency save
- Cable type
- PS/2 type
Equivalents
- 2054858-003: Marquette (GEMSIT)
Technical Specs
P/N: 2054858-003 Key Specs
Item
KEYBOARD, LAB PRE ASSEMBLY, BLACK, ENGLISH
OEM
GE Medical Systems Information Technology (GEMSIT)
OEM #
2054858-003
Condition
New OEM Original
Returnable
No
Color
Black
The Keyboard - Black Mac Lab/Cath Lab Pre-Assembly is used in Diagnostic ECG. It consist of 12 yellow keys for comment, ART, AO, LV, LA, PV, PA, RV, PCW, RA, VC, VEN and SP. The F12 key is highlighted in red color for emergency save. The keyboard has 102 keys and is a PS/2 cable type keyboard. The barcode scanner cable must not be connected to the keyboard PS/2 connector when system is powered on. This would cause the system to lock up after the first scan. If this happens, the barcode scanner cable must be replaced. The keyboard LEDs will turn on at Power On and turn off just prior to the floppy disk drive’s LED turning on. These LEDs indicate that the PC/AT system (EPC-9) is functioning properly. The keyboard connector is hot-pluggable. Any standard keyboard can be plugged in without powering down the system or causing keyboard errors. It is used in ARC Aisys, HCS-IT ComboLab IT, MS PDM, HCS-IT CardioLab IT 6.9, Evaluated/Not Applicable XI (Invasive), XV Innova IGS 620 and ComboLab Upgrades.
Additional Features:
- 2054858-003: Marquette (GEMSIT)
Product Overview
The Keyboard - Black Mac Lab/Cath Lab Pre-Assembly is used in Diagnostic ECG. It consist of 12 yellow keys for comment, ART, AO, LV, LA, PV, PA, RV, PCW, RA, VC, VEN and SP. The F12 key is highlighted in red color for emergency save. The keyboard has 102 keys and is a PS/2 cable type keyboard. The barcode scanner cable must not be connected to the keyboard PS/2 connector when system is powered on. This would cause the system to lock up after the first scan. If this happens, the barcode scanner cable must be replaced. The keyboard LEDs will turn on at Power On and turn off just prior to the floppy disk drive’s LED turning on. These LEDs indicate that the PC/AT system (EPC-9) is functioning properly. The keyboard connector is hot-pluggable. Any standard keyboard can be plugged in without powering down the system or causing keyboard errors. It is used in ARC Aisys, HCS-IT ComboLab IT, MS PDM, HCS-IT CardioLab IT 6.9, Evaluated/Not Applicable XI (Invasive), XV Innova IGS 620 and ComboLab Upgrades.
Additional Features:
Features
- Manufacturer: GE Medical Systems Information Technology (GEMSIT)
- Condition: New OEM Original
- Purchase Type: Outright
- Warranty: 90 Day
- Returnable: No
- 101 keys
- Red key for emergency save
- Cable type
- PS/2 type
How can we
improve our item listing
?Equivalents
- 2054858-003: Marquette (GEMSIT)
Technical Specs
P/N: 2054858-003 Key Specs
Item
KEYBOARD, LAB PRE ASSEMBLY, BLACK, ENGLISH
OEM
GE Medical Systems Information Technology (GEMSIT)
OEM #
2054858-003
Condition
New OEM Original
Returnable
No
Color
Black
The Keyboard - Black Mac Lab/Cath Lab Pre-Assembly is used in Diagnostic ECG. It consist of 12 yellow keys for comment, ART, AO, LV, LA, PV, PA, RV, PCW, RA, VC, VEN and SP. The F12 key is highlighted in red color for emergency save. The keyboard has 102 keys and is a PS/2 cable type keyboard. The barcode scanner cable must not be connected to the keyboard PS/2 connector when system is powered on. This would cause the system to lock up after the first scan. If this happens, the barcode scanner cable must be replaced. The keyboard LEDs will turn on at Power On and turn off just prior to the floppy disk drive’s LED turning on. These LEDs indicate that the PC/AT system (EPC-9) is functioning properly. The keyboard connector is hot-pluggable. Any standard keyboard can be plugged in without powering down the system or causing keyboard errors. It is used in ARC Aisys, HCS-IT ComboLab IT, MS PDM, HCS-IT CardioLab IT 6.9, Evaluated/Not Applicable XI (Invasive), XV Innova IGS 620 and ComboLab Upgrades.
Additional Features:
- 2054858-003: Marquette (GEMSIT)