ENCLOSER, BOTTOM SHIELD COATED, 170 SERIES SERIES by GE Medical Systems Information Technology (GEMSIT)
OEM#: 2007385-002ENCLOSER, BOTTOM SHIELD COATED, 170 SERIES SERIES by GE Medical Systems Information Technology (GEMSIT)
Drop Shipped From GE - Not For Export Out Of US
The Enclosure Bottom Shield Coated 170 Series is used in Corometrics® 170 Series which comes under the modality of Maternal-Infant Care. For the electrical safety tests for 170 series families, each time, the main enclosure is disassembled or a circuit board is removed, tested, repaired, or replaced, and record the date and results in a Maintenance Repair Log. Wrap the entire monitor enclosure in aluminum foil. Configure a leakage tester to perform an enclosure leakage test. Newer monitors have top covers with tabs which fit into corresponding slots in the bottom enclosure. If you are installing a newer tabbed top cover onto an older bottom enclosure (without slots), you must remove the tabs. Use a small hand file or other tool to remove the plastic tabs. If you are installing a tabbed cover onto a bottom slotted enclosure, ensure that the tabs align with the slots. The 170 Series are a family of fetal care monitors offering various combinations of modalities to suit the institution’s needs. Fetal monitors are indicated for use in the monitoring of the fetus during the antepartum period as well as throughout labor and delivery. Each monitor also has an optional monitoring mode to detect fetal body movements.
The Enclosure Bottom Shield Coated 170 Series is used in Corometrics® 170 Series which comes under the modality of Maternal-Infant Care. For the electrical safety tests for 170 series families, each time, the main enclosure is disassembled or a circuit board is removed, tested, repaired, or replaced, and record the date and results in a Maintenance Repair Log. Wrap the entire monitor enclosure in aluminum foil. Configure a leakage tester to perform an enclosure leakage test. Newer monitors have top covers with tabs which fit into corresponding slots in the bottom enclosure. If you are installing a newer tabbed top cover onto an older bottom enclosure (without slots), you must remove the tabs. Use a small hand file or other tool to remove the plastic tabs. If you are installing a tabbed cover onto a bottom slotted enclosure, ensure that the tabs align with the slots. The 170 Series are a family of fetal care monitors offering various combinations of modalities to suit the institution’s needs. Fetal monitors are indicated for use in the monitoring of the fetus during the antepartum period as well as throughout labor and delivery. Each monitor also has an optional monitoring mode to detect fetal body movements.
The Enclosure Bottom Shield Coated 170 Series is used in Corometrics® 170 Series which comes under the modality of Maternal-Infant Care. For the electrical safety tests for 170 series families, each time, the main enclosure is disassembled or a circuit board is removed, tested, repaired, or replaced, and record the date and results in a Maintenance Repair Log. Wrap the entire monitor enclosure in aluminum foil. Configure a leakage tester to perform an enclosure leakage test. Newer monitors have top covers with tabs which fit into corresponding slots in the bottom enclosure. If you are installing a newer tabbed top cover onto an older bottom enclosure (without slots), you must remove the tabs. Use a small hand file or other tool to remove the plastic tabs. If you are installing a tabbed cover onto a bottom slotted enclosure, ensure that the tabs align with the slots. The 170 Series are a family of fetal care monitors offering various combinations of modalities to suit the institution’s needs. Fetal monitors are indicated for use in the monitoring of the fetus during the antepartum period as well as throughout labor and delivery. Each monitor also has an optional monitoring mode to detect fetal body movements.
The Enclosure Bottom Shield Coated 170 Series is used in Corometrics® 170 Series which comes under the modality of Maternal-Infant Care. For the electrical safety tests for 170 series families, each time, the main enclosure is disassembled or a circuit board is removed, tested, repaired, or replaced, and record the date and results in a Maintenance Repair Log. Wrap the entire monitor enclosure in aluminum foil. Configure a leakage tester to perform an enclosure leakage test. Newer monitors have top covers with tabs which fit into corresponding slots in the bottom enclosure. If you are installing a newer tabbed top cover onto an older bottom enclosure (without slots), you must remove the tabs. Use a small hand file or other tool to remove the plastic tabs. If you are installing a tabbed cover onto a bottom slotted enclosure, ensure that the tabs align with the slots. The 170 Series are a family of fetal care monitors offering various combinations of modalities to suit the institution’s needs. Fetal monitors are indicated for use in the monitoring of the fetus during the antepartum period as well as throughout labor and delivery. Each monitor also has an optional monitoring mode to detect fetal body movements.
The Enclosure Bottom Shield Coated 170 Series is used in Corometrics® 170 Series which comes under the modality of Maternal-Infant Care. For the electrical safety tests for 170 series families, each time, the main enclosure is disassembled or a circuit board is removed, tested, repaired, or replaced, and record the date and results in a Maintenance Repair Log. Wrap the entire monitor enclosure in aluminum foil. Configure a leakage tester to perform an enclosure leakage test. Newer monitors have top covers with tabs which fit into corresponding slots in the bottom enclosure. If you are installing a newer tabbed top cover onto an older bottom enclosure (without slots), you must remove the tabs. Use a small hand file or other tool to remove the plastic tabs. If you are installing a tabbed cover onto a bottom slotted enclosure, ensure that the tabs align with the slots. The 170 Series are a family of fetal care monitors offering various combinations of modalities to suit the institution’s needs. Fetal monitors are indicated for use in the monitoring of the fetus during the antepartum period as well as throughout labor and delivery. Each monitor also has an optional monitoring mode to detect fetal body movements.
The Enclosure Bottom Shield Coated 170 Series is used in Corometrics® 170 Series which comes under the modality of Maternal-Infant Care. For the electrical safety tests for 170 series families, each time, the main enclosure is disassembled or a circuit board is removed, tested, repaired, or replaced, and record the date and results in a Maintenance Repair Log. Wrap the entire monitor enclosure in aluminum foil. Configure a leakage tester to perform an enclosure leakage test. Newer monitors have top covers with tabs which fit into corresponding slots in the bottom enclosure. If you are installing a newer tabbed top cover onto an older bottom enclosure (without slots), you must remove the tabs. Use a small hand file or other tool to remove the plastic tabs. If you are installing a tabbed cover onto a bottom slotted enclosure, ensure that the tabs align with the slots. The 170 Series are a family of fetal care monitors offering various combinations of modalities to suit the institution’s needs. Fetal monitors are indicated for use in the monitoring of the fetus during the antepartum period as well as throughout labor and delivery. Each monitor also has an optional monitoring mode to detect fetal body movements.