GAS SPRING
Replaces GE Healthcare HG000716692GAS SPRING
The Gas Spring with Ball Joint 2000 N can be defined as hydro-pneumatic energy storage elements. Nitrogen gas and oil are used for providing compressible and damping medium. The gas spring unit consists of a piston rod, sealed cylinder and sealer. The nitrogen gas and oil are filled in a sealed cylinder and the piston rod is attached with the cylinder. This unit works in a two-principle movement compression stroke and extension stroke. In compression stroke the piston rod is pushed down the fluid and gas in the cylinder gets compressed and the energy gets stored. When the pressure on the rod gets released the piston gets back to its original position due to the energy released in the compressed fluid. The two-end of the gas spring consists of a ball joint for special purpose. The sealers are made of high-quality material to withstand the pressure. This part is widely used in NM Ventri, NM Infinia Hawkeye, NM Infinia Hawkeye 4, NM Xeleris WS 3.1, NM Discovery NM/CT 570C, NM Infinia II, NM Xeleris WS 3.0, NM Discovery NM/CT 670, NM Xeleris WS 1.1, NM Millennium VG, NM Millennium Square Acquisition, NM Infinia Hawkeye 4, PET Xeleris WS 1.1, NM Xeleris WS 3.1 and many other machines.
- Good structural design
- Made of quality material
- Good corrosion resistance
- Faster motion
The Gas Spring with Ball Joint 2000 N can be defined as hydro-pneumatic energy storage elements. Nitrogen gas and oil are used for providing compressible and damping medium. The gas spring unit consists of a piston rod, sealed cylinder and sealer. The nitrogen gas and oil are filled in a sealed cylinder and the piston rod is attached with the cylinder. This unit works in a two-principle movement compression stroke and extension stroke. In compression stroke the piston rod is pushed down the fluid and gas in the cylinder gets compressed and the energy gets stored. When the pressure on the rod gets released the piston gets back to its original position due to the energy released in the compressed fluid. The two-end of the gas spring consists of a ball joint for special purpose. The sealers are made of high-quality material to withstand the pressure. This part is widely used in NM Ventri, NM Infinia Hawkeye, NM Infinia Hawkeye 4, NM Xeleris WS 3.1, NM Discovery NM/CT 570C, NM Infinia II, NM Xeleris WS 3.0, NM Discovery NM/CT 670, NM Xeleris WS 1.1, NM Millennium VG, NM Millennium Square Acquisition, NM Infinia Hawkeye 4, PET Xeleris WS 1.1, NM Xeleris WS 3.1 and many other machines.
- Good structural design
- Made of quality material
- Good corrosion resistance
- Faster motion
The Gas Spring with Ball Joint 2000 N can be defined as hydro-pneumatic energy storage elements. Nitrogen gas and oil are used for providing compressible and damping medium. The gas spring unit consists of a piston rod, sealed cylinder and sealer. The nitrogen gas and oil are filled in a sealed cylinder and the piston rod is attached with the cylinder. This unit works in a two-principle movement compression stroke and extension stroke. In compression stroke the piston rod is pushed down the fluid and gas in the cylinder gets compressed and the energy gets stored. When the pressure on the rod gets released the piston gets back to its original position due to the energy released in the compressed fluid. The two-end of the gas spring consists of a ball joint for special purpose. The sealers are made of high-quality material to withstand the pressure. This part is widely used in NM Ventri, NM Infinia Hawkeye, NM Infinia Hawkeye 4, NM Xeleris WS 3.1, NM Discovery NM/CT 570C, NM Infinia II, NM Xeleris WS 3.0, NM Discovery NM/CT 670, NM Xeleris WS 1.1, NM Millennium VG, NM Millennium Square Acquisition, NM Infinia Hawkeye 4, PET Xeleris WS 1.1, NM Xeleris WS 3.1 and many other machines.
- Good structural design
- Made of quality material
- Good corrosion resistance
- Faster motion
The Gas Spring with Ball Joint 2000 N can be defined as hydro-pneumatic energy storage elements. Nitrogen gas and oil are used for providing compressible and damping medium. The gas spring unit consists of a piston rod, sealed cylinder and sealer. The nitrogen gas and oil are filled in a sealed cylinder and the piston rod is attached with the cylinder. This unit works in a two-principle movement compression stroke and extension stroke. In compression stroke the piston rod is pushed down the fluid and gas in the cylinder gets compressed and the energy gets stored. When the pressure on the rod gets released the piston gets back to its original position due to the energy released in the compressed fluid. The two-end of the gas spring consists of a ball joint for special purpose. The sealers are made of high-quality material to withstand the pressure. This part is widely used in NM Ventri, NM Infinia Hawkeye, NM Infinia Hawkeye 4, NM Xeleris WS 3.1, NM Discovery NM/CT 570C, NM Infinia II, NM Xeleris WS 3.0, NM Discovery NM/CT 670, NM Xeleris WS 1.1, NM Millennium VG, NM Millennium Square Acquisition, NM Infinia Hawkeye 4, PET Xeleris WS 1.1, NM Xeleris WS 3.1 and many other machines.
- Good structural design
- Made of quality material
- Good corrosion resistance
- Faster motion
The Gas Spring with Ball Joint 2000 N can be defined as hydro-pneumatic energy storage elements. Nitrogen gas and oil are used for providing compressible and damping medium. The gas spring unit consists of a piston rod, sealed cylinder and sealer. The nitrogen gas and oil are filled in a sealed cylinder and the piston rod is attached with the cylinder. This unit works in a two-principle movement compression stroke and extension stroke. In compression stroke the piston rod is pushed down the fluid and gas in the cylinder gets compressed and the energy gets stored. When the pressure on the rod gets released the piston gets back to its original position due to the energy released in the compressed fluid. The two-end of the gas spring consists of a ball joint for special purpose. The sealers are made of high-quality material to withstand the pressure. This part is widely used in NM Ventri, NM Infinia Hawkeye, NM Infinia Hawkeye 4, NM Xeleris WS 3.1, NM Discovery NM/CT 570C, NM Infinia II, NM Xeleris WS 3.0, NM Discovery NM/CT 670, NM Xeleris WS 1.1, NM Millennium VG, NM Millennium Square Acquisition, NM Infinia Hawkeye 4, PET Xeleris WS 1.1, NM Xeleris WS 3.1 and many other machines.
- Good structural design
- Made of quality material
- Good corrosion resistance
- Faster motion
The Gas Spring with Ball Joint 2000 N can be defined as hydro-pneumatic energy storage elements. Nitrogen gas and oil are used for providing compressible and damping medium. The gas spring unit consists of a piston rod, sealed cylinder and sealer. The nitrogen gas and oil are filled in a sealed cylinder and the piston rod is attached with the cylinder. This unit works in a two-principle movement compression stroke and extension stroke. In compression stroke the piston rod is pushed down the fluid and gas in the cylinder gets compressed and the energy gets stored. When the pressure on the rod gets released the piston gets back to its original position due to the energy released in the compressed fluid. The two-end of the gas spring consists of a ball joint for special purpose. The sealers are made of high-quality material to withstand the pressure. This part is widely used in NM Ventri, NM Infinia Hawkeye, NM Infinia Hawkeye 4, NM Xeleris WS 3.1, NM Discovery NM/CT 570C, NM Infinia II, NM Xeleris WS 3.0, NM Discovery NM/CT 670, NM Xeleris WS 1.1, NM Millennium VG, NM Millennium Square Acquisition, NM Infinia Hawkeye 4, PET Xeleris WS 1.1, NM Xeleris WS 3.1 and many other machines.
- Good structural design
- Made of quality material
- Good corrosion resistance
- Faster motion