INLET CABLE WITH FUSE HOLDER
Exchange PurchaseExchange Purchase
Replaces GE Healthcare 5447044INLET CABLE WITH FUSE HOLDER
ExchangeGoods sold on an "Exchange" basis require that Buyer return a like, repairable item within 15 days (or the seller's specified time frame) in order to receive the price quoted. For full details, see Terms and Conditions.
Part #5447044
The Alternating Current (AC) Inlet Cable with Fuse Holder is used in the ultrasound machines, X-ray machines and also in a few other Digital Imaging (DI) machines. It is an assembly that consists of three wires and a fuse holder. One wire is for the line terminal, one for the neutral terminal and the other will go to the ground terminal. It is used in the Nezha cart assembly of the medical equipment. Shrink tubes are used for the wires in order to protect from high temperatures and also from getting damaged. The three wires are directly soldered to the AC inlet pin. The line (L) and neutral (N) connects to the connector pin1 and pin2. The assembly goes through various tests such as a temperature cycle test, drop test, pressure test and few others according to the standard reliability requirements. All these are placed in a bag, labeled individually and boxed with label for shipment. It is being used in machines such as Venue 40, Revolution XR/d, Venue 50 and in other medical diagnostic equipment.
Additional Features:
The Alternating Current (AC) Inlet Cable with Fuse Holder is used in the ultrasound machines, X-ray machines and also in a few other Digital Imaging (DI) machines. It is an assembly that consists of three wires and a fuse holder. One wire is for the line terminal, one for the neutral terminal and the other will go to the ground terminal. It is used in the Nezha cart assembly of the medical equipment. Shrink tubes are used for the wires in order to protect from high temperatures and also from getting damaged. The three wires are directly soldered to the AC inlet pin. The line (L) and neutral (N) connects to the connector pin1 and pin2. The assembly goes through various tests such as a temperature cycle test, drop test, pressure test and few others according to the standard reliability requirements. All these are placed in a bag, labeled individually and boxed with label for shipment. It is being used in machines such as Venue 40, Revolution XR/d, Venue 50 and in other medical diagnostic equipment.
Additional Features:
The Alternating Current (AC) Inlet Cable with Fuse Holder is used in the ultrasound machines, X-ray machines and also in a few other Digital Imaging (DI) machines. It is an assembly that consists of three wires and a fuse holder. One wire is for the line terminal, one for the neutral terminal and the other will go to the ground terminal. It is used in the Nezha cart assembly of the medical equipment. Shrink tubes are used for the wires in order to protect from high temperatures and also from getting damaged. The three wires are directly soldered to the AC inlet pin. The line (L) and neutral (N) connects to the connector pin1 and pin2. The assembly goes through various tests such as a temperature cycle test, drop test, pressure test and few others according to the standard reliability requirements. All these are placed in a bag, labeled individually and boxed with label for shipment. It is being used in machines such as Venue 40, Revolution XR/d, Venue 50 and in other medical diagnostic equipment.
Additional Features:
The Alternating Current (AC) Inlet Cable with Fuse Holder is used in the ultrasound machines, X-ray machines and also in a few other Digital Imaging (DI) machines. It is an assembly that consists of three wires and a fuse holder. One wire is for the line terminal, one for the neutral terminal and the other will go to the ground terminal. It is used in the Nezha cart assembly of the medical equipment. Shrink tubes are used for the wires in order to protect from high temperatures and also from getting damaged. The three wires are directly soldered to the AC inlet pin. The line (L) and neutral (N) connects to the connector pin1 and pin2. The assembly goes through various tests such as a temperature cycle test, drop test, pressure test and few others according to the standard reliability requirements. All these are placed in a bag, labeled individually and boxed with label for shipment. It is being used in machines such as Venue 40, Revolution XR/d, Venue 50 and in other medical diagnostic equipment.
Additional Features:
The Alternating Current (AC) Inlet Cable with Fuse Holder is used in the ultrasound machines, X-ray machines and also in a few other Digital Imaging (DI) machines. It is an assembly that consists of three wires and a fuse holder. One wire is for the line terminal, one for the neutral terminal and the other will go to the ground terminal. It is used in the Nezha cart assembly of the medical equipment. Shrink tubes are used for the wires in order to protect from high temperatures and also from getting damaged. The three wires are directly soldered to the AC inlet pin. The line (L) and neutral (N) connects to the connector pin1 and pin2. The assembly goes through various tests such as a temperature cycle test, drop test, pressure test and few others according to the standard reliability requirements. All these are placed in a bag, labeled individually and boxed with label for shipment. It is being used in machines such as Venue 40, Revolution XR/d, Venue 50 and in other medical diagnostic equipment.
Additional Features:
The Alternating Current (AC) Inlet Cable with Fuse Holder is used in the ultrasound machines, X-ray machines and also in a few other Digital Imaging (DI) machines. It is an assembly that consists of three wires and a fuse holder. One wire is for the line terminal, one for the neutral terminal and the other will go to the ground terminal. It is used in the Nezha cart assembly of the medical equipment. Shrink tubes are used for the wires in order to protect from high temperatures and also from getting damaged. The three wires are directly soldered to the AC inlet pin. The line (L) and neutral (N) connects to the connector pin1 and pin2. The assembly goes through various tests such as a temperature cycle test, drop test, pressure test and few others according to the standard reliability requirements. All these are placed in a bag, labeled individually and boxed with label for shipment. It is being used in machines such as Venue 40, Revolution XR/d, Venue 50 and in other medical diagnostic equipment.
Additional Features: