SINGLE BATTERY PACK ONLY (3 BATTERY CELLS) POWER SONIC BRAND, 36V 20AH PER PACK, REV. 7
The Battery Pack Assembly is used in X-ray devices. The system is a battery powered unit that can deliver a lethal current. For removal or installation of battery pack assembly, loosens the connector screws and the power, then unplug the cables. Once the battery installed, install the battery compartment covers. The tabs in the covers are intended to hold the batteries in the proper location and should be positioned towards the front of the unit. If the covers will not fit correctly, reposition the batteries to provide proper clearance. If the cover holes do not line up properly, rotate the cover 180 degrees (it is upside down). Before restoring the system power, one must configure the unit in “Safe Mode” charge.
The Battery Pack Assembly is used in X-ray devices. The system is a battery powered unit that can deliver a lethal current. For removal or installation of battery pack assembly, loosens the connector screws and the power, then unplug the cables. Once the battery installed, install the battery compartment covers. The tabs in the covers are intended to hold the batteries in the proper location and should be positioned towards the front of the unit. If the covers will not fit correctly, reposition the batteries to provide proper clearance. If the cover holes do not line up properly, rotate the cover 180 degrees (it is upside down). Before restoring the system power, one must configure the unit in “Safe Mode” charge.
The Battery Pack Assembly is used in X-ray devices. The system is a battery powered unit that can deliver a lethal current. For removal or installation of battery pack assembly, loosens the connector screws and the power, then unplug the cables. Once the battery installed, install the battery compartment covers. The tabs in the covers are intended to hold the batteries in the proper location and should be positioned towards the front of the unit. If the covers will not fit correctly, reposition the batteries to provide proper clearance. If the cover holes do not line up properly, rotate the cover 180 degrees (it is upside down). Before restoring the system power, one must configure the unit in “Safe Mode” charge.
The Battery Pack Assembly is used in X-ray devices. The system is a battery powered unit that can deliver a lethal current. For removal or installation of battery pack assembly, loosens the connector screws and the power, then unplug the cables. Once the battery installed, install the battery compartment covers. The tabs in the covers are intended to hold the batteries in the proper location and should be positioned towards the front of the unit. If the covers will not fit correctly, reposition the batteries to provide proper clearance. If the cover holes do not line up properly, rotate the cover 180 degrees (it is upside down). Before restoring the system power, one must configure the unit in “Safe Mode” charge.
The Battery Pack Assembly is used in X-ray devices. The system is a battery powered unit that can deliver a lethal current. For removal or installation of battery pack assembly, loosens the connector screws and the power, then unplug the cables. Once the battery installed, install the battery compartment covers. The tabs in the covers are intended to hold the batteries in the proper location and should be positioned towards the front of the unit. If the covers will not fit correctly, reposition the batteries to provide proper clearance. If the cover holes do not line up properly, rotate the cover 180 degrees (it is upside down). Before restoring the system power, one must configure the unit in “Safe Mode” charge.
The Battery Pack Assembly is used in X-ray devices. The system is a battery powered unit that can deliver a lethal current. For removal or installation of battery pack assembly, loosens the connector screws and the power, then unplug the cables. Once the battery installed, install the battery compartment covers. The tabs in the covers are intended to hold the batteries in the proper location and should be positioned towards the front of the unit. If the covers will not fit correctly, reposition the batteries to provide proper clearance. If the cover holes do not line up properly, rotate the cover 180 degrees (it is upside down). Before restoring the system power, one must configure the unit in “Safe Mode” charge.