OEM#: RS-C2-TO15-02New OEM Original Outright
1L TOUGH 1500 V2 RESIN FOR FORM4 PRINTER by Formlabs, Inc.
Your price:
$173.26 each
OEM#: RS-C2-TO15-021L TOUGH 1500 V2 RESIN FOR FORM4 PRINTER by Formlabs, Inc.
New OEM Original Outright
Your price:
$173.26 each
Resin, Tough 1500 Type, 155% (Post-Cured) Elongation at Break, 1.37Mpa Flexural Modulus, 41Mpa Flexural Strength, 42J/m (Post-Cured) Notched Izod, 76D Shore Hardness, 34Mpa Ultimate Tensile Strength, V2 Version, 1L Capacity, For Form4, Form 4B, Form 4L, Form 4BL, 3D Printer
Asset Information
Are you an existing customer? Sign in to access your account.
ADD TO LIST
Product Overview
Tough 1500 Resin V2 is a resilient material with strength, stiffness, and toughness comparable to polypropylene (PP), offering exceptional resistance to fractures, impacts, and shattering.Create parts that balance stiffness and ductility, ideal for compliant mechanisms or rugged enclosures with self-tapping screws and snap fits. Tough 1500 Resin V2 supports a wide range of applications, from functional prototypes to end-use jigs and fixtures.This new material formulation leverages the Form 4 Series to deliver 10 times higher fracture toughness than its predecessor.Tougher Where It Matters - 10 X higher work of fracture, so parts don’t fail when drilled, tapped, or cracked. Three times higher Gardner impact strength for thin walls that don’t shatterDuctile and Resilient for Long-Lasting Compliant Parts - Extremely high elongation at break (155%) and Ross flex fatigue (8,000 cycles) for features like snap fits and compliant mechanismsHigh Environmental Stability for Demanding Applications - The highest temperature and UV resistance (66°C HDT and –30.4% EAB* after 400 hours of accelerated aging) of any high-compliance (>100% EAB) SLA materialTough Parts That Don’t Deform Over Time - High creep resistance matching polypropylene, with less than 3% strain under 7 MPa load after 2 weeksHeat Deflection Temp. @ 1.8 MPa: 53°C (post-cured)
Features
- Tougher Where It Matters - 10 X higher work of fracture, so parts don't fail when drilled, tapped, or cracked. Three times higher Gardner impact strength for thin walls that don't shatter
- Ductile and Resilient for Long-Lasting Compliant Parts - Extremely high elongation at break (155%) and Ross flex fatigue (8,000 cycles) for features like snap fits and compliant mechanisms
- High Environmental Stability for Demanding Applications - The highest temperature and UV resistance (66°C HDT and -30.4% EAB* after 400 hours of accelerated aging) of any high-compliance (>100% EAB) SLA material
- Tough Parts That Don't Deform Over Time - High creep resistance matching polypropylene, with less than 3% strain under 7 MPa load after 2 weeks
- Heat Deflection Temp. @ 1.8 MPa: 53°C (post-cured)
Technical Specs
P/N: RS-C2-TO15-02 Key Specs
Item
1L TOUGH 1500 V2 RESIN FOR FORM4 PRINTER
OEM
Formlabs, Inc.
OEM #
RS-C2-TO15-02
Condition
New OEM Original
Returnable
No
Warranty
Mfr Warranty
Capacity
1L
Elongation at Break
155% (Post-Cured)
Flexural Modulus
1.37Mpa
Flexural Strength
41Mpa
For Use With
For Form4, Form 4B, Form 4L, Form 4BL, 3D Printer
Notched Izod
42J/m (Post-Cured)
Shore Hardness
76D
Type
Tough 1500
Ultimate Tensile Strength
34Mpa
Version
V2
Tough 1500 Resin V2 is a resilient material with strength, stiffness, and toughness comparable to polypropylene (PP), offering exceptional resistance to fractures, impacts, and shattering.Create parts that balance stiffness and ductility, ideal for compliant mechanisms or rugged enclosures with self-tapping screws and snap fits. Tough 1500 Resin V2 supports a wide range of applications, from functional prototypes to end-use jigs and fixtures.This new material formulation leverages the Form 4 Series to deliver 10 times higher fracture toughness than its predecessor.Tougher Where It Matters - 10 X higher work of fracture, so parts don’t fail when drilled, tapped, or cracked. Three times higher Gardner impact strength for thin walls that don’t shatterDuctile and Resilient for Long-Lasting Compliant Parts - Extremely high elongation at break (155%) and Ross flex fatigue (8,000 cycles) for features like snap fits and compliant mechanismsHigh Environmental Stability for Demanding Applications - The highest temperature and UV resistance (66°C HDT and –30.4% EAB* after 400 hours of accelerated aging) of any high-compliance (>100% EAB) SLA materialTough Parts That Don’t Deform Over Time - High creep resistance matching polypropylene, with less than 3% strain under 7 MPa load after 2 weeksHeat Deflection Temp. @ 1.8 MPa: 53°C (post-cured)
Product Overview
Tough 1500 Resin V2 is a resilient material with strength, stiffness, and toughness comparable to polypropylene (PP), offering exceptional resistance to fractures, impacts, and shattering.Create parts that balance stiffness and ductility, ideal for compliant mechanisms or rugged enclosures with self-tapping screws and snap fits. Tough 1500 Resin V2 supports a wide range of applications, from functional prototypes to end-use jigs and fixtures.This new material formulation leverages the Form 4 Series to deliver 10 times higher fracture toughness than its predecessor.Tougher Where It Matters - 10 X higher work of fracture, so parts don’t fail when drilled, tapped, or cracked. Three times higher Gardner impact strength for thin walls that don’t shatterDuctile and Resilient for Long-Lasting Compliant Parts - Extremely high elongation at break (155%) and Ross flex fatigue (8,000 cycles) for features like snap fits and compliant mechanismsHigh Environmental Stability for Demanding Applications - The highest temperature and UV resistance (66°C HDT and –30.4% EAB* after 400 hours of accelerated aging) of any high-compliance (>100% EAB) SLA materialTough Parts That Don’t Deform Over Time - High creep resistance matching polypropylene, with less than 3% strain under 7 MPa load after 2 weeksHeat Deflection Temp. @ 1.8 MPa: 53°C (post-cured)
Features
- Tougher Where It Matters - 10 X higher work of fracture, so parts don't fail when drilled, tapped, or cracked. Three times higher Gardner impact strength for thin walls that don't shatter
- Ductile and Resilient for Long-Lasting Compliant Parts - Extremely high elongation at break (155%) and Ross flex fatigue (8,000 cycles) for features like snap fits and compliant mechanisms
- High Environmental Stability for Demanding Applications - The highest temperature and UV resistance (66°C HDT and -30.4% EAB* after 400 hours of accelerated aging) of any high-compliance (>100% EAB) SLA material
- Tough Parts That Don't Deform Over Time - High creep resistance matching polypropylene, with less than 3% strain under 7 MPa load after 2 weeks
- Heat Deflection Temp. @ 1.8 MPa: 53°C (post-cured)
Technical Specs
P/N: RS-C2-TO15-02 Key Specs
Item
1L TOUGH 1500 V2 RESIN FOR FORM4 PRINTER
OEM
Formlabs, Inc.
OEM #
RS-C2-TO15-02
Condition
New OEM Original
Returnable
No
Warranty
Mfr Warranty
Capacity
1L
Elongation at Break
155% (Post-Cured)
Flexural Modulus
1.37Mpa
Flexural Strength
41Mpa
For Use With
For Form4, Form 4B, Form 4L, Form 4BL, 3D Printer
Notched Izod
42J/m (Post-Cured)
Shore Hardness
76D
Type
Tough 1500
Ultimate Tensile Strength
34Mpa
Version
V2
Tough 1500 Resin V2 is a resilient material with strength, stiffness, and toughness comparable to polypropylene (PP), offering exceptional resistance to fractures, impacts, and shattering.Create parts that balance stiffness and ductility, ideal for compliant mechanisms or rugged enclosures with self-tapping screws and snap fits. Tough 1500 Resin V2 supports a wide range of applications, from functional prototypes to end-use jigs and fixtures.This new material formulation leverages the Form 4 Series to deliver 10 times higher fracture toughness than its predecessor.Tougher Where It Matters - 10 X higher work of fracture, so parts don’t fail when drilled, tapped, or cracked. Three times higher Gardner impact strength for thin walls that don’t shatterDuctile and Resilient for Long-Lasting Compliant Parts - Extremely high elongation at break (155%) and Ross flex fatigue (8,000 cycles) for features like snap fits and compliant mechanismsHigh Environmental Stability for Demanding Applications - The highest temperature and UV resistance (66°C HDT and –30.4% EAB* after 400 hours of accelerated aging) of any high-compliance (>100% EAB) SLA materialTough Parts That Don’t Deform Over Time - High creep resistance matching polypropylene, with less than 3% strain under 7 MPa load after 2 weeksHeat Deflection Temp. @ 1.8 MPa: 53°C (post-cured)
Product Overview
Tough 1500 Resin V2 is a resilient material with strength, stiffness, and toughness comparable to polypropylene (PP), offering exceptional resistance to fractures, impacts, and shattering.Create parts that balance stiffness and ductility, ideal for compliant mechanisms or rugged enclosures with self-tapping screws and snap fits. Tough 1500 Resin V2 supports a wide range of applications, from functional prototypes to end-use jigs and fixtures.This new material formulation leverages the Form 4 Series to deliver 10 times higher fracture toughness than its predecessor.Tougher Where It Matters - 10 X higher work of fracture, so parts don’t fail when drilled, tapped, or cracked. Three times higher Gardner impact strength for thin walls that don’t shatterDuctile and Resilient for Long-Lasting Compliant Parts - Extremely high elongation at break (155%) and Ross flex fatigue (8,000 cycles) for features like snap fits and compliant mechanismsHigh Environmental Stability for Demanding Applications - The highest temperature and UV resistance (66°C HDT and –30.4% EAB* after 400 hours of accelerated aging) of any high-compliance (>100% EAB) SLA materialTough Parts That Don’t Deform Over Time - High creep resistance matching polypropylene, with less than 3% strain under 7 MPa load after 2 weeksHeat Deflection Temp. @ 1.8 MPa: 53°C (post-cured)
Features
- Tougher Where It Matters - 10 X higher work of fracture, so parts don't fail when drilled, tapped, or cracked. Three times higher Gardner impact strength for thin walls that don't shatter
- Ductile and Resilient for Long-Lasting Compliant Parts - Extremely high elongation at break (155%) and Ross flex fatigue (8,000 cycles) for features like snap fits and compliant mechanisms
- High Environmental Stability for Demanding Applications - The highest temperature and UV resistance (66°C HDT and -30.4% EAB* after 400 hours of accelerated aging) of any high-compliance (>100% EAB) SLA material
- Tough Parts That Don't Deform Over Time - High creep resistance matching polypropylene, with less than 3% strain under 7 MPa load after 2 weeks
- Heat Deflection Temp. @ 1.8 MPa: 53°C (post-cured)
Technical Specs
P/N: RS-C2-TO15-02 Key Specs
Item
1L TOUGH 1500 V2 RESIN FOR FORM4 PRINTER
OEM
Formlabs, Inc.
OEM #
RS-C2-TO15-02
Condition
New OEM Original
Returnable
No
Warranty
Mfr Warranty
Capacity
1L
Elongation at Break
155% (Post-Cured)
Flexural Modulus
1.37Mpa
Flexural Strength
41Mpa
For Use With
For Form4, Form 4B, Form 4L, Form 4BL, 3D Printer
Notched Izod
42J/m (Post-Cured)
Shore Hardness
76D
Type
Tough 1500
Ultimate Tensile Strength
34Mpa
Version
V2
Tough 1500 Resin V2 is a resilient material with strength, stiffness, and toughness comparable to polypropylene (PP), offering exceptional resistance to fractures, impacts, and shattering.Create parts that balance stiffness and ductility, ideal for compliant mechanisms or rugged enclosures with self-tapping screws and snap fits. Tough 1500 Resin V2 supports a wide range of applications, from functional prototypes to end-use jigs and fixtures.This new material formulation leverages the Form 4 Series to deliver 10 times higher fracture toughness than its predecessor.Tougher Where It Matters - 10 X higher work of fracture, so parts don’t fail when drilled, tapped, or cracked. Three times higher Gardner impact strength for thin walls that don’t shatterDuctile and Resilient for Long-Lasting Compliant Parts - Extremely high elongation at break (155%) and Ross flex fatigue (8,000 cycles) for features like snap fits and compliant mechanismsHigh Environmental Stability for Demanding Applications - The highest temperature and UV resistance (66°C HDT and –30.4% EAB* after 400 hours of accelerated aging) of any high-compliance (>100% EAB) SLA materialTough Parts That Don’t Deform Over Time - High creep resistance matching polypropylene, with less than 3% strain under 7 MPa load after 2 weeksHeat Deflection Temp. @ 1.8 MPa: 53°C (post-cured)