OEM#: 5608365New OEM Original Outright
FOUR-CHANNEL INFUSION DEVICE ANALYZER (IDA-6/4) by Fluke Electronics Corp (Biomedical Div.)
Your price:
$18,357.99 each
View All
OEM#: 5608365FOUR-CHANNEL INFUSION DEVICE ANALYZER (IDA-6/4) by Fluke Electronics Corp (Biomedical Div.)
New OEM Original Outright
Your price:
$18,357.99 each
Asset Information
Option: Four-Channel Analyzer (IDA-6/4)
One-Channel Analyzer (IDA-6/1)
Two-Channel Analyzer (IDA-6/2)
Four-Channel Analyzer (IDA-6/4)
Single-Channel Module (IDA-6/M)
Are you an existing customer? Sign in to access your account.
ADD TO LIST
Product Overview
The future of biomedical testing is now: introducing the revolutionary IDA-6 Infusion Device Analyzer, enabled with OneQA workflow automation software to help simplify the biomedical testing process.
The IDA-6 is 100x faster than the IDA-5 and with access to our proprietary OneQA software onboard, testing and documenting results is fully automated saving you valuable time while increasing accuracy. OneQA allows users to customize pre-built procedures on IDA-6, results are automatically saved on the device with the option of syncing to your PC simultaneously. Completing your PMs have been simplified with our intuitive user interface.
IDA-6 Infusion Device Analyzer Key Features
Groundbreaking Infusion Pump Testing Technology
Experience the future of infusion pump testing with our next-gen IDA-6 Infusion Device Analyzer. This high-tech device offers customization and convenience without complications.
It’s evolutionary.
The IDA-6 Infusion Device Analyzer is at the forefront of a new era of innovation in the medical device testing industry. The device is the first-ever Fluke Biomedical device to be OneQA-enabled. Now you can ditch the laptop and seamlessly conduct automated testing directly from the IDA-6. The IDA-6 supports offline mode, allowing you to test without being connected to the internet. When connected, the IDA-6 will automatically sync test results to your PC, making integrating test reports to your CMMS easier, improving traceability, and standardizing your test procedures reducing human error.
It’s easy.
Ease of use is a key feature of the IDA-6. We listened to the challenges you face while completing infusion pump testing and developed the IntelliPumpTM Technology for the IDA-6 Infusion Device Analyzer in response. This technology allows users to recirculate water during testing without the need to prime, eliminating unnecessary headaches and complexities. This feature, combined with our user-friendly workflow automation software and intuitive user interface, makes it even easier to set up and complete comprehensive testing in minutes.
It’s efficient.
Designed with time-saving capabilities, IDA-6 is engineered with flexibility in mind. The modular design provides more versatility, allowing for each individual channel to be removed for service or calibration. This eliminates downtime during the testing process, meaning you no longer need to send off an entire analyzer for maintenance. Instead, when a channel needs calibration or maintenance, the remaining channels can continue functioning uninterrupted.
It’s essential.
The IDA-6 takes medical device testing to a new level of ease and convenience. Testing doesn’t have to be demanding. Our technology makes it simple to get the job done efficiently and accurately, so you and your organization can focus on what you do best: protecting lives. Our products have been entrusted by biomedical professionals worldwide when it comes to infusion pump testing for decades. Bring the ease and power of the IDA-6 Infusion Device Analyzer to your organization today.
Technical Specs
P/N: 5608365 Key Specs
Item
FOUR-CHANNEL INFUSION DEVICE ANALYZER (IDA-6/4)
OEM
Fluke Electronics Corp (Biomedical Div.)
OEM #
5608365
Condition
New OEM Original
Returnable
No
Warranty
12 Month
Additional flow uncertainty
± ΔP × 0.001 mL/h
Additional volume uncertainty
± (test duration in hours) × ΔP × 0.001 mL
Atmospheric pressure 70
70 - 107 kPa, altitude up to 3000 m (10 000 ft)
Base flow accuracy (after > 0.1 mL)
± (1 % + 0.005 mL/h)
Base flow range
1 - 100 mL/h
Bolus and PCA Graphs
Instant flow with up to 1 s resolution (gradually reduced after 1 hour), numbered boluses
Bolus duration accuracy
± (0.2 % + 0.2 s)
Bolus duration range
0 s - 1000 h
Bolus flow accuracy (after > 0.1 mL and > 10 s)
± (1 % + 0.005 mL/h) at < 500 mL/h, otherwise ± 2 %
Bolus flow range 10 × base flow – 3000 mL/h (steady flow),
10 × base flow - 3000 mL/h (steady flow), 10 × base flow - 1500 mL/h (peristaltic flow)
Bolus volume accuracy (after > 1 s)
± (2 % + 0.01 mL)
Bolus volume range
0.01 - 100 000 mL
Certifications & Standards
Complies with IEC 61010-1:2010, pollution degree 2
Channels
1 to 4, depending on configuration
Connectivity
1 × USB-C for PC communication, 3 × USB-A for peripherals
Data storage
> 10 000 measurements
Dimensions (w × d × h)
295 mm × 210 mm × 260 mm (11.6 in × 8.3 in × 10.1 in)
Display
10-inch multi-touch, 800 × 600 pixels
EMC standard
Complies with IEC 61326-1:2012
Flow and Volume Graphs
Instant flow and mean flow with up to 1 s resolution (gradually reduced after 1 hour), IEC 60601-2-24 trumpet curve
Humidity
< 90 % relative humidity, non-condensing
Infusion device standard
For testing according to IEC 60601-2-24:1998
Mean flow accuracy (after > 0.1 mL and > 10s)
± (1 % + 0.005 mL/h) at < 500 mL/h, otherwise ± 2 %
Mean flow range
0 - 3000 mL/h (steady flow), 0 - 1500 mL/h (peristaltic flow)
Mean flow resolution
0.001 mL/h
Occlusion Graphs
Pressure with up to 50 ms resolution (gradually reduced after 3 minutes)
Operating temperature
+15 - +30 °C (+59 - +86 °F)
Option
Four-Channel Analyzer (IDA-6/4)
Peak pressure accuracy
± (1 % + 5 mmHg (0.1 psi)), 50 ms moving average
Peak pressure range
-200 - +2600 mmHg (-3.8 - +50 psi)
Peak pressure resolution
1 mmHg (0.01 psi)
Power
19 V DC, 3 A
Pressure
mmHg, kPa, psi, bar
Previous Part Number
5329726
Range
-200 - +600 mmHg (-3.8 - +11.6 psi)
Residual volume accuracy
± (2 % + 0.01 mL)
Storage temperature
-20 - +70 °C (-4 - +158 °F), when drained
Time accuracy
± (0.2 % + 0.2 s)
Time range
0 s - 1000 h
Time to alarm
0 s - 1000 h
Time to alarm accuracy
Operator dependent, manual stop button
Time to peak accuracy
± (0.2 % + 0.05 s)
Time to peak range
0 s - 1000 h
Time trig volume
≤ 3 μL
Volume
mL, g (1 mL = 0.998 g)
Volume accuracy (after > 0.1 mL and > 10s)
± (1 % + 0.003 mL) at < 500 mL/h, otherwise ± 2 %
Volume range
0 - 100 000 mL
Volume resolution
0.001 mL
Weight
3.8 kg (8.4 pounds)
Fitments
The future of biomedical testing is now: introducing the revolutionary IDA-6 Infusion Device Analyzer, enabled with OneQA workflow automation software to help simplify the biomedical testing process.
The IDA-6 is 100x faster than the IDA-5 and with access to our proprietary OneQA software onboard, testing and documenting results is fully automated saving you valuable time while increasing accuracy. OneQA allows users to customize pre-built procedures on IDA-6, results are automatically saved on the device with the option of syncing to your PC simultaneously. Completing your PMs have been simplified with our intuitive user interface.
IDA-6 Infusion Device Analyzer Key Features
Groundbreaking Infusion Pump Testing Technology
Experience the future of infusion pump testing with our next-gen IDA-6 Infusion Device Analyzer. This high-tech device offers customization and convenience without complications.
It’s evolutionary.
The IDA-6 Infusion Device Analyzer is at the forefront of a new era of innovation in the medical device testing industry. The device is the first-ever Fluke Biomedical device to be OneQA-enabled. Now you can ditch the laptop and seamlessly conduct automated testing directly from the IDA-6. The IDA-6 supports offline mode, allowing you to test without being connected to the internet. When connected, the IDA-6 will automatically sync test results to your PC, making integrating test reports to your CMMS easier, improving traceability, and standardizing your test procedures reducing human error.
It’s easy.
Ease of use is a key feature of the IDA-6. We listened to the challenges you face while completing infusion pump testing and developed the IntelliPumpTM Technology for the IDA-6 Infusion Device Analyzer in response. This technology allows users to recirculate water during testing without the need to prime, eliminating unnecessary headaches and complexities. This feature, combined with our user-friendly workflow automation software and intuitive user interface, makes it even easier to set up and complete comprehensive testing in minutes.
It’s efficient.
Designed with time-saving capabilities, IDA-6 is engineered with flexibility in mind. The modular design provides more versatility, allowing for each individual channel to be removed for service or calibration. This eliminates downtime during the testing process, meaning you no longer need to send off an entire analyzer for maintenance. Instead, when a channel needs calibration or maintenance, the remaining channels can continue functioning uninterrupted.
It’s essential.
The IDA-6 takes medical device testing to a new level of ease and convenience. Testing doesn’t have to be demanding. Our technology makes it simple to get the job done efficiently and accurately, so you and your organization can focus on what you do best: protecting lives. Our products have been entrusted by biomedical professionals worldwide when it comes to infusion pump testing for decades. Bring the ease and power of the IDA-6 Infusion Device Analyzer to your organization today.
- Fluke Electronics Corp (Biomedical Div.)
- IDA-6
Product Overview
The future of biomedical testing is now: introducing the revolutionary IDA-6 Infusion Device Analyzer, enabled with OneQA workflow automation software to help simplify the biomedical testing process.
The IDA-6 is 100x faster than the IDA-5 and with access to our proprietary OneQA software onboard, testing and documenting results is fully automated saving you valuable time while increasing accuracy. OneQA allows users to customize pre-built procedures on IDA-6, results are automatically saved on the device with the option of syncing to your PC simultaneously. Completing your PMs have been simplified with our intuitive user interface.
IDA-6 Infusion Device Analyzer Key Features
Groundbreaking Infusion Pump Testing Technology
Experience the future of infusion pump testing with our next-gen IDA-6 Infusion Device Analyzer. This high-tech device offers customization and convenience without complications.
It’s evolutionary.
The IDA-6 Infusion Device Analyzer is at the forefront of a new era of innovation in the medical device testing industry. The device is the first-ever Fluke Biomedical device to be OneQA-enabled. Now you can ditch the laptop and seamlessly conduct automated testing directly from the IDA-6. The IDA-6 supports offline mode, allowing you to test without being connected to the internet. When connected, the IDA-6 will automatically sync test results to your PC, making integrating test reports to your CMMS easier, improving traceability, and standardizing your test procedures reducing human error.
It’s easy.
Ease of use is a key feature of the IDA-6. We listened to the challenges you face while completing infusion pump testing and developed the IntelliPumpTM Technology for the IDA-6 Infusion Device Analyzer in response. This technology allows users to recirculate water during testing without the need to prime, eliminating unnecessary headaches and complexities. This feature, combined with our user-friendly workflow automation software and intuitive user interface, makes it even easier to set up and complete comprehensive testing in minutes.
It’s efficient.
Designed with time-saving capabilities, IDA-6 is engineered with flexibility in mind. The modular design provides more versatility, allowing for each individual channel to be removed for service or calibration. This eliminates downtime during the testing process, meaning you no longer need to send off an entire analyzer for maintenance. Instead, when a channel needs calibration or maintenance, the remaining channels can continue functioning uninterrupted.
It’s essential.
The IDA-6 takes medical device testing to a new level of ease and convenience. Testing doesn’t have to be demanding. Our technology makes it simple to get the job done efficiently and accurately, so you and your organization can focus on what you do best: protecting lives. Our products have been entrusted by biomedical professionals worldwide when it comes to infusion pump testing for decades. Bring the ease and power of the IDA-6 Infusion Device Analyzer to your organization today.
Technical Specs
P/N: 5608365 Key Specs
Item
FOUR-CHANNEL INFUSION DEVICE ANALYZER (IDA-6/4)
OEM
Fluke Electronics Corp (Biomedical Div.)
OEM #
5608365
Condition
New OEM Original
Returnable
No
Warranty
12 Month
Additional flow uncertainty
± ΔP × 0.001 mL/h
Additional volume uncertainty
± (test duration in hours) × ΔP × 0.001 mL
Atmospheric pressure 70
70 - 107 kPa, altitude up to 3000 m (10 000 ft)
Base flow accuracy (after > 0.1 mL)
± (1 % + 0.005 mL/h)
Base flow range
1 - 100 mL/h
Bolus and PCA Graphs
Instant flow with up to 1 s resolution (gradually reduced after 1 hour), numbered boluses
Bolus duration accuracy
± (0.2 % + 0.2 s)
Bolus duration range
0 s - 1000 h
Bolus flow accuracy (after > 0.1 mL and > 10 s)
± (1 % + 0.005 mL/h) at < 500 mL/h, otherwise ± 2 %
Bolus flow range 10 × base flow – 3000 mL/h (steady flow),
10 × base flow - 3000 mL/h (steady flow), 10 × base flow - 1500 mL/h (peristaltic flow)
Bolus volume accuracy (after > 1 s)
± (2 % + 0.01 mL)
Bolus volume range
0.01 - 100 000 mL
Certifications & Standards
Complies with IEC 61010-1:2010, pollution degree 2
Channels
1 to 4, depending on configuration
Connectivity
1 × USB-C for PC communication, 3 × USB-A for peripherals
Data storage
> 10 000 measurements
Dimensions (w × d × h)
295 mm × 210 mm × 260 mm (11.6 in × 8.3 in × 10.1 in)
Display
10-inch multi-touch, 800 × 600 pixels
EMC standard
Complies with IEC 61326-1:2012
Flow and Volume Graphs
Instant flow and mean flow with up to 1 s resolution (gradually reduced after 1 hour), IEC 60601-2-24 trumpet curve
Humidity
< 90 % relative humidity, non-condensing
Infusion device standard
For testing according to IEC 60601-2-24:1998
Mean flow accuracy (after > 0.1 mL and > 10s)
± (1 % + 0.005 mL/h) at < 500 mL/h, otherwise ± 2 %
Mean flow range
0 - 3000 mL/h (steady flow), 0 - 1500 mL/h (peristaltic flow)
Mean flow resolution
0.001 mL/h
Occlusion Graphs
Pressure with up to 50 ms resolution (gradually reduced after 3 minutes)
Operating temperature
+15 - +30 °C (+59 - +86 °F)
Option
Four-Channel Analyzer (IDA-6/4)
Peak pressure accuracy
± (1 % + 5 mmHg (0.1 psi)), 50 ms moving average
Peak pressure range
-200 - +2600 mmHg (-3.8 - +50 psi)
Peak pressure resolution
1 mmHg (0.01 psi)
Power
19 V DC, 3 A
Pressure
mmHg, kPa, psi, bar
Previous Part Number
5329726
Range
-200 - +600 mmHg (-3.8 - +11.6 psi)
Residual volume accuracy
± (2 % + 0.01 mL)
Storage temperature
-20 - +70 °C (-4 - +158 °F), when drained
Time accuracy
± (0.2 % + 0.2 s)
Time range
0 s - 1000 h
Time to alarm
0 s - 1000 h
Time to alarm accuracy
Operator dependent, manual stop button
Time to peak accuracy
± (0.2 % + 0.05 s)
Time to peak range
0 s - 1000 h
Time trig volume
≤ 3 μL
Volume
mL, g (1 mL = 0.998 g)
Volume accuracy (after > 0.1 mL and > 10s)
± (1 % + 0.003 mL) at < 500 mL/h, otherwise ± 2 %
Volume range
0 - 100 000 mL
Volume resolution
0.001 mL
Weight
3.8 kg (8.4 pounds)
Fitments
The future of biomedical testing is now: introducing the revolutionary IDA-6 Infusion Device Analyzer, enabled with OneQA workflow automation software to help simplify the biomedical testing process.
The IDA-6 is 100x faster than the IDA-5 and with access to our proprietary OneQA software onboard, testing and documenting results is fully automated saving you valuable time while increasing accuracy. OneQA allows users to customize pre-built procedures on IDA-6, results are automatically saved on the device with the option of syncing to your PC simultaneously. Completing your PMs have been simplified with our intuitive user interface.
IDA-6 Infusion Device Analyzer Key Features
Groundbreaking Infusion Pump Testing Technology
Experience the future of infusion pump testing with our next-gen IDA-6 Infusion Device Analyzer. This high-tech device offers customization and convenience without complications.
It’s evolutionary.
The IDA-6 Infusion Device Analyzer is at the forefront of a new era of innovation in the medical device testing industry. The device is the first-ever Fluke Biomedical device to be OneQA-enabled. Now you can ditch the laptop and seamlessly conduct automated testing directly from the IDA-6. The IDA-6 supports offline mode, allowing you to test without being connected to the internet. When connected, the IDA-6 will automatically sync test results to your PC, making integrating test reports to your CMMS easier, improving traceability, and standardizing your test procedures reducing human error.
It’s easy.
Ease of use is a key feature of the IDA-6. We listened to the challenges you face while completing infusion pump testing and developed the IntelliPumpTM Technology for the IDA-6 Infusion Device Analyzer in response. This technology allows users to recirculate water during testing without the need to prime, eliminating unnecessary headaches and complexities. This feature, combined with our user-friendly workflow automation software and intuitive user interface, makes it even easier to set up and complete comprehensive testing in minutes.
It’s efficient.
Designed with time-saving capabilities, IDA-6 is engineered with flexibility in mind. The modular design provides more versatility, allowing for each individual channel to be removed for service or calibration. This eliminates downtime during the testing process, meaning you no longer need to send off an entire analyzer for maintenance. Instead, when a channel needs calibration or maintenance, the remaining channels can continue functioning uninterrupted.
It’s essential.
The IDA-6 takes medical device testing to a new level of ease and convenience. Testing doesn’t have to be demanding. Our technology makes it simple to get the job done efficiently and accurately, so you and your organization can focus on what you do best: protecting lives. Our products have been entrusted by biomedical professionals worldwide when it comes to infusion pump testing for decades. Bring the ease and power of the IDA-6 Infusion Device Analyzer to your organization today.
- Fluke Electronics Corp (Biomedical Div.)
- IDA-6
Product Overview
The future of biomedical testing is now: introducing the revolutionary IDA-6 Infusion Device Analyzer, enabled with OneQA workflow automation software to help simplify the biomedical testing process.
The IDA-6 is 100x faster than the IDA-5 and with access to our proprietary OneQA software onboard, testing and documenting results is fully automated saving you valuable time while increasing accuracy. OneQA allows users to customize pre-built procedures on IDA-6, results are automatically saved on the device with the option of syncing to your PC simultaneously. Completing your PMs have been simplified with our intuitive user interface.
IDA-6 Infusion Device Analyzer Key Features
Groundbreaking Infusion Pump Testing Technology
Experience the future of infusion pump testing with our next-gen IDA-6 Infusion Device Analyzer. This high-tech device offers customization and convenience without complications.
It’s evolutionary.
The IDA-6 Infusion Device Analyzer is at the forefront of a new era of innovation in the medical device testing industry. The device is the first-ever Fluke Biomedical device to be OneQA-enabled. Now you can ditch the laptop and seamlessly conduct automated testing directly from the IDA-6. The IDA-6 supports offline mode, allowing you to test without being connected to the internet. When connected, the IDA-6 will automatically sync test results to your PC, making integrating test reports to your CMMS easier, improving traceability, and standardizing your test procedures reducing human error.
It’s easy.
Ease of use is a key feature of the IDA-6. We listened to the challenges you face while completing infusion pump testing and developed the IntelliPumpTM Technology for the IDA-6 Infusion Device Analyzer in response. This technology allows users to recirculate water during testing without the need to prime, eliminating unnecessary headaches and complexities. This feature, combined with our user-friendly workflow automation software and intuitive user interface, makes it even easier to set up and complete comprehensive testing in minutes.
It’s efficient.
Designed with time-saving capabilities, IDA-6 is engineered with flexibility in mind. The modular design provides more versatility, allowing for each individual channel to be removed for service or calibration. This eliminates downtime during the testing process, meaning you no longer need to send off an entire analyzer for maintenance. Instead, when a channel needs calibration or maintenance, the remaining channels can continue functioning uninterrupted.
It’s essential.
The IDA-6 takes medical device testing to a new level of ease and convenience. Testing doesn’t have to be demanding. Our technology makes it simple to get the job done efficiently and accurately, so you and your organization can focus on what you do best: protecting lives. Our products have been entrusted by biomedical professionals worldwide when it comes to infusion pump testing for decades. Bring the ease and power of the IDA-6 Infusion Device Analyzer to your organization today.
Technical Specs
P/N: 5608365 Key Specs
Item
FOUR-CHANNEL INFUSION DEVICE ANALYZER (IDA-6/4)
OEM
Fluke Electronics Corp (Biomedical Div.)
OEM #
5608365
Condition
New OEM Original
Returnable
No
Warranty
12 Month
Additional flow uncertainty
± ΔP × 0.001 mL/h
Additional volume uncertainty
± (test duration in hours) × ΔP × 0.001 mL
Atmospheric pressure 70
70 - 107 kPa, altitude up to 3000 m (10 000 ft)
Base flow accuracy (after > 0.1 mL)
± (1 % + 0.005 mL/h)
Base flow range
1 - 100 mL/h
Bolus and PCA Graphs
Instant flow with up to 1 s resolution (gradually reduced after 1 hour), numbered boluses
Bolus duration accuracy
± (0.2 % + 0.2 s)
Bolus duration range
0 s - 1000 h
Bolus flow accuracy (after > 0.1 mL and > 10 s)
± (1 % + 0.005 mL/h) at < 500 mL/h, otherwise ± 2 %
Bolus flow range 10 × base flow – 3000 mL/h (steady flow),
10 × base flow - 3000 mL/h (steady flow), 10 × base flow - 1500 mL/h (peristaltic flow)
Bolus volume accuracy (after > 1 s)
± (2 % + 0.01 mL)
Bolus volume range
0.01 - 100 000 mL
Certifications & Standards
Complies with IEC 61010-1:2010, pollution degree 2
Channels
1 to 4, depending on configuration
Connectivity
1 × USB-C for PC communication, 3 × USB-A for peripherals
Data storage
> 10 000 measurements
Dimensions (w × d × h)
295 mm × 210 mm × 260 mm (11.6 in × 8.3 in × 10.1 in)
Display
10-inch multi-touch, 800 × 600 pixels
EMC standard
Complies with IEC 61326-1:2012
Flow and Volume Graphs
Instant flow and mean flow with up to 1 s resolution (gradually reduced after 1 hour), IEC 60601-2-24 trumpet curve
Humidity
< 90 % relative humidity, non-condensing
Infusion device standard
For testing according to IEC 60601-2-24:1998
Mean flow accuracy (after > 0.1 mL and > 10s)
± (1 % + 0.005 mL/h) at < 500 mL/h, otherwise ± 2 %
Mean flow range
0 - 3000 mL/h (steady flow), 0 - 1500 mL/h (peristaltic flow)
Mean flow resolution
0.001 mL/h
Occlusion Graphs
Pressure with up to 50 ms resolution (gradually reduced after 3 minutes)
Operating temperature
+15 - +30 °C (+59 - +86 °F)
Option
Four-Channel Analyzer (IDA-6/4)
Peak pressure accuracy
± (1 % + 5 mmHg (0.1 psi)), 50 ms moving average
Peak pressure range
-200 - +2600 mmHg (-3.8 - +50 psi)
Peak pressure resolution
1 mmHg (0.01 psi)
Power
19 V DC, 3 A
Pressure
mmHg, kPa, psi, bar
Previous Part Number
5329726
Range
-200 - +600 mmHg (-3.8 - +11.6 psi)
Residual volume accuracy
± (2 % + 0.01 mL)
Storage temperature
-20 - +70 °C (-4 - +158 °F), when drained
Time accuracy
± (0.2 % + 0.2 s)
Time range
0 s - 1000 h
Time to alarm
0 s - 1000 h
Time to alarm accuracy
Operator dependent, manual stop button
Time to peak accuracy
± (0.2 % + 0.05 s)
Time to peak range
0 s - 1000 h
Time trig volume
≤ 3 μL
Volume
mL, g (1 mL = 0.998 g)
Volume accuracy (after > 0.1 mL and > 10s)
± (1 % + 0.003 mL) at < 500 mL/h, otherwise ± 2 %
Volume range
0 - 100 000 mL
Volume resolution
0.001 mL
Weight
3.8 kg (8.4 pounds)
Fitments
The future of biomedical testing is now: introducing the revolutionary IDA-6 Infusion Device Analyzer, enabled with OneQA workflow automation software to help simplify the biomedical testing process.
The IDA-6 is 100x faster than the IDA-5 and with access to our proprietary OneQA software onboard, testing and documenting results is fully automated saving you valuable time while increasing accuracy. OneQA allows users to customize pre-built procedures on IDA-6, results are automatically saved on the device with the option of syncing to your PC simultaneously. Completing your PMs have been simplified with our intuitive user interface.
IDA-6 Infusion Device Analyzer Key Features
Groundbreaking Infusion Pump Testing Technology
Experience the future of infusion pump testing with our next-gen IDA-6 Infusion Device Analyzer. This high-tech device offers customization and convenience without complications.
It’s evolutionary.
The IDA-6 Infusion Device Analyzer is at the forefront of a new era of innovation in the medical device testing industry. The device is the first-ever Fluke Biomedical device to be OneQA-enabled. Now you can ditch the laptop and seamlessly conduct automated testing directly from the IDA-6. The IDA-6 supports offline mode, allowing you to test without being connected to the internet. When connected, the IDA-6 will automatically sync test results to your PC, making integrating test reports to your CMMS easier, improving traceability, and standardizing your test procedures reducing human error.
It’s easy.
Ease of use is a key feature of the IDA-6. We listened to the challenges you face while completing infusion pump testing and developed the IntelliPumpTM Technology for the IDA-6 Infusion Device Analyzer in response. This technology allows users to recirculate water during testing without the need to prime, eliminating unnecessary headaches and complexities. This feature, combined with our user-friendly workflow automation software and intuitive user interface, makes it even easier to set up and complete comprehensive testing in minutes.
It’s efficient.
Designed with time-saving capabilities, IDA-6 is engineered with flexibility in mind. The modular design provides more versatility, allowing for each individual channel to be removed for service or calibration. This eliminates downtime during the testing process, meaning you no longer need to send off an entire analyzer for maintenance. Instead, when a channel needs calibration or maintenance, the remaining channels can continue functioning uninterrupted.
It’s essential.
The IDA-6 takes medical device testing to a new level of ease and convenience. Testing doesn’t have to be demanding. Our technology makes it simple to get the job done efficiently and accurately, so you and your organization can focus on what you do best: protecting lives. Our products have been entrusted by biomedical professionals worldwide when it comes to infusion pump testing for decades. Bring the ease and power of the IDA-6 Infusion Device Analyzer to your organization today.
- Fluke Electronics Corp (Biomedical Div.)
- IDA-6