220V 20A LCD DISPLAY ELECTRICAL SAFETY ANALYZER by Fluke Electronics Corp (Biomedical Div.)
OEM#: 4722214220V 20A LCD DISPLAY ELECTRICAL SAFETY ANALYZER by Fluke Electronics Corp (Biomedical Div.)
Analyzer, Electrical Safety Type, 9 x 7 x 2.5in Dimensions, 15 to 20A 5min On/5min Off Duty Cycle, 0 to 20ohm Earth Resistance Range, IP30 Ingress Protection, Manual Modes of Operation, 220V Voltage Rating, 10 to 90% (Non-Condensing) Relative Humidity, 20A Current Rating, LCD Display Type, 0 to 50°C Operating Temperature
The ESA609 Electrical Safety Analyzer is a rugged, portable and easy-to-use analyzer designed for general electrical safety testing. Engineered for on-the-go technicians, the ESA609 requires no training to use and has a rubberized case that allows it to sustain the rigor of transportation, and helps prevent damage when accidentally dropped. Additionally, its functional strap and featherweight design make it one of the most portable electrical safety analyzers in its class. Heavy-duty switches allow users to effortlessly change polarity and configuration of the neutral connection between open and closed, while push-button operation ensures fast transition between tests for complete basic testing in minutes. The ESA609 integrates all functions needed to test medical devices when patient lead testing is notrequired, including: line (mains) voltage, ground wire (protective earth) resistance, equipment current, leakage current and point-to point tests. Versatile to global electrical safety standards of choice, the ESA609 tests to ANSI/ AAMI ES1, NFPA-99, and parts of IEC62353 and IEC60601-1.
- Test current consumption up to 20 A for a diverse set of medical devices
- All parameters needed for basic electrical safety testing: Line (mains) voltage, ground wire (or protective earth) resistance, equipment current, ground wire (earth) leakage, chassis (enclosure) leakage, direct equipment leakage, and point to point leakage and resistance
- Global use: the ESA609 will operate at 120V and 230V
- Rugged: Rubberized case and Ingress Protectionrating of IP30 help prevent damage whendropped
- User-friendly: Quick push-button operation forrapid testing
- Portable: Featherweight (1.5 lb) design, functional strap, and tilt stand make it easy for transportationand operation on-the-go (onsite or offsite)
- Rigorously tested for safety and reliability, withCE, CSA and Australia RCM in addition to Fluke quality
- Global support network delivering prompt service and peace of mind to Fluke Biomedical customers worldwide
- Standards compliance include: ANSI/AAMI ES1, NFPA-99, and parts of IEC62353 and IEC60601-1
- Test current consumption up to 20 A for a diverse set of medical devices
- Standards compliance include: ANSI/AAMI ES1, NFPA-99, and parts of IEC62353 and IEC60601-1
- All parameters needed for basic electrical safety testing: Line (mains) voltage, ground wire (or protective earth) resistance, equipment current, ground wire (earth) leakage, chassis (enclosure) leakage, direct equipment leakage, and point to point l
- Global use: the ESA609 will operate at 120V and 230V
- Rugged: Rubberized case and Ingress Protectionrating of IP30 help prevent damage whendropped
- User-friendly: Quick push-button operation forrapid testing
- Portable: Featherweight (1.5 lb) design, functional strap, and tilt stand make it easy for transportationand operation on-the-go (onsite or offsite)
- Rigorously tested for safety and reliability, withCE, CSA and Australia RCM in addition to Fluke quality
- Two-year extended warranty (no-cost, availableafter first-year calibration at any authorized Fluke Biomedical Service Center)
- Global support network delivering prompt service and peace of mind to Fluke Biomedical customers worldwide
The ESA609 Electrical Safety Analyzer is a rugged, portable and easy-to-use analyzer designed for general electrical safety testing. Engineered for on-the-go technicians, the ESA609 requires no training to use and has a rubberized case that allows it to sustain the rigor of transportation, and helps prevent damage when accidentally dropped. Additionally, its functional strap and featherweight design make it one of the most portable electrical safety analyzers in its class. Heavy-duty switches allow users to effortlessly change polarity and configuration of the neutral connection between open and closed, while push-button operation ensures fast transition between tests for complete basic testing in minutes. The ESA609 integrates all functions needed to test medical devices when patient lead testing is notrequired, including: line (mains) voltage, ground wire (protective earth) resistance, equipment current, leakage current and point-to point tests. Versatile to global electrical safety standards of choice, the ESA609 tests to ANSI/ AAMI ES1, NFPA-99, and parts of IEC62353 and IEC60601-1.
- Test current consumption up to 20 A for a diverse set of medical devices
- All parameters needed for basic electrical safety testing: Line (mains) voltage, ground wire (or protective earth) resistance, equipment current, ground wire (earth) leakage, chassis (enclosure) leakage, direct equipment leakage, and point to point leakage and resistance
- Global use: the ESA609 will operate at 120V and 230V
- Rugged: Rubberized case and Ingress Protectionrating of IP30 help prevent damage whendropped
- User-friendly: Quick push-button operation forrapid testing
- Portable: Featherweight (1.5 lb) design, functional strap, and tilt stand make it easy for transportationand operation on-the-go (onsite or offsite)
- Rigorously tested for safety and reliability, withCE, CSA and Australia RCM in addition to Fluke quality
- Global support network delivering prompt service and peace of mind to Fluke Biomedical customers worldwide
- Standards compliance include: ANSI/AAMI ES1, NFPA-99, and parts of IEC62353 and IEC60601-1
The ESA609 Electrical Safety Analyzer is a rugged, portable and easy-to-use analyzer designed for general electrical safety testing. Engineered for on-the-go technicians, the ESA609 requires no training to use and has a rubberized case that allows it to sustain the rigor of transportation, and helps prevent damage when accidentally dropped. Additionally, its functional strap and featherweight design make it one of the most portable electrical safety analyzers in its class. Heavy-duty switches allow users to effortlessly change polarity and configuration of the neutral connection between open and closed, while push-button operation ensures fast transition between tests for complete basic testing in minutes. The ESA609 integrates all functions needed to test medical devices when patient lead testing is notrequired, including: line (mains) voltage, ground wire (protective earth) resistance, equipment current, leakage current and point-to point tests. Versatile to global electrical safety standards of choice, the ESA609 tests to ANSI/ AAMI ES1, NFPA-99, and parts of IEC62353 and IEC60601-1.
- Test current consumption up to 20 A for a diverse set of medical devices
- All parameters needed for basic electrical safety testing: Line (mains) voltage, ground wire (or protective earth) resistance, equipment current, ground wire (earth) leakage, chassis (enclosure) leakage, direct equipment leakage, and point to point leakage and resistance
- Global use: the ESA609 will operate at 120V and 230V
- Rugged: Rubberized case and Ingress Protectionrating of IP30 help prevent damage whendropped
- User-friendly: Quick push-button operation forrapid testing
- Portable: Featherweight (1.5 lb) design, functional strap, and tilt stand make it easy for transportationand operation on-the-go (onsite or offsite)
- Rigorously tested for safety and reliability, withCE, CSA and Australia RCM in addition to Fluke quality
- Global support network delivering prompt service and peace of mind to Fluke Biomedical customers worldwide
- Standards compliance include: ANSI/AAMI ES1, NFPA-99, and parts of IEC62353 and IEC60601-1
- Test current consumption up to 20 A for a diverse set of medical devices
- Standards compliance include: ANSI/AAMI ES1, NFPA-99, and parts of IEC62353 and IEC60601-1
- All parameters needed for basic electrical safety testing: Line (mains) voltage, ground wire (or protective earth) resistance, equipment current, ground wire (earth) leakage, chassis (enclosure) leakage, direct equipment leakage, and point to point l
- Global use: the ESA609 will operate at 120V and 230V
- Rugged: Rubberized case and Ingress Protectionrating of IP30 help prevent damage whendropped
- User-friendly: Quick push-button operation forrapid testing
- Portable: Featherweight (1.5 lb) design, functional strap, and tilt stand make it easy for transportationand operation on-the-go (onsite or offsite)
- Rigorously tested for safety and reliability, withCE, CSA and Australia RCM in addition to Fluke quality
- Two-year extended warranty (no-cost, availableafter first-year calibration at any authorized Fluke Biomedical Service Center)
- Global support network delivering prompt service and peace of mind to Fluke Biomedical customers worldwide
The ESA609 Electrical Safety Analyzer is a rugged, portable and easy-to-use analyzer designed for general electrical safety testing. Engineered for on-the-go technicians, the ESA609 requires no training to use and has a rubberized case that allows it to sustain the rigor of transportation, and helps prevent damage when accidentally dropped. Additionally, its functional strap and featherweight design make it one of the most portable electrical safety analyzers in its class. Heavy-duty switches allow users to effortlessly change polarity and configuration of the neutral connection between open and closed, while push-button operation ensures fast transition between tests for complete basic testing in minutes. The ESA609 integrates all functions needed to test medical devices when patient lead testing is notrequired, including: line (mains) voltage, ground wire (protective earth) resistance, equipment current, leakage current and point-to point tests. Versatile to global electrical safety standards of choice, the ESA609 tests to ANSI/ AAMI ES1, NFPA-99, and parts of IEC62353 and IEC60601-1.
- Test current consumption up to 20 A for a diverse set of medical devices
- All parameters needed for basic electrical safety testing: Line (mains) voltage, ground wire (or protective earth) resistance, equipment current, ground wire (earth) leakage, chassis (enclosure) leakage, direct equipment leakage, and point to point leakage and resistance
- Global use: the ESA609 will operate at 120V and 230V
- Rugged: Rubberized case and Ingress Protectionrating of IP30 help prevent damage whendropped
- User-friendly: Quick push-button operation forrapid testing
- Portable: Featherweight (1.5 lb) design, functional strap, and tilt stand make it easy for transportationand operation on-the-go (onsite or offsite)
- Rigorously tested for safety and reliability, withCE, CSA and Australia RCM in addition to Fluke quality
- Global support network delivering prompt service and peace of mind to Fluke Biomedical customers worldwide
- Standards compliance include: ANSI/AAMI ES1, NFPA-99, and parts of IEC62353 and IEC60601-1
The ESA609 Electrical Safety Analyzer is a rugged, portable and easy-to-use analyzer designed for general electrical safety testing. Engineered for on-the-go technicians, the ESA609 requires no training to use and has a rubberized case that allows it to sustain the rigor of transportation, and helps prevent damage when accidentally dropped. Additionally, its functional strap and featherweight design make it one of the most portable electrical safety analyzers in its class. Heavy-duty switches allow users to effortlessly change polarity and configuration of the neutral connection between open and closed, while push-button operation ensures fast transition between tests for complete basic testing in minutes. The ESA609 integrates all functions needed to test medical devices when patient lead testing is notrequired, including: line (mains) voltage, ground wire (protective earth) resistance, equipment current, leakage current and point-to point tests. Versatile to global electrical safety standards of choice, the ESA609 tests to ANSI/ AAMI ES1, NFPA-99, and parts of IEC62353 and IEC60601-1.
- Test current consumption up to 20 A for a diverse set of medical devices
- All parameters needed for basic electrical safety testing: Line (mains) voltage, ground wire (or protective earth) resistance, equipment current, ground wire (earth) leakage, chassis (enclosure) leakage, direct equipment leakage, and point to point leakage and resistance
- Global use: the ESA609 will operate at 120V and 230V
- Rugged: Rubberized case and Ingress Protectionrating of IP30 help prevent damage whendropped
- User-friendly: Quick push-button operation forrapid testing
- Portable: Featherweight (1.5 lb) design, functional strap, and tilt stand make it easy for transportationand operation on-the-go (onsite or offsite)
- Rigorously tested for safety and reliability, withCE, CSA and Australia RCM in addition to Fluke quality
- Global support network delivering prompt service and peace of mind to Fluke Biomedical customers worldwide
- Standards compliance include: ANSI/AAMI ES1, NFPA-99, and parts of IEC62353 and IEC60601-1
- Test current consumption up to 20 A for a diverse set of medical devices
- Standards compliance include: ANSI/AAMI ES1, NFPA-99, and parts of IEC62353 and IEC60601-1
- All parameters needed for basic electrical safety testing: Line (mains) voltage, ground wire (or protective earth) resistance, equipment current, ground wire (earth) leakage, chassis (enclosure) leakage, direct equipment leakage, and point to point l
- Global use: the ESA609 will operate at 120V and 230V
- Rugged: Rubberized case and Ingress Protectionrating of IP30 help prevent damage whendropped
- User-friendly: Quick push-button operation forrapid testing
- Portable: Featherweight (1.5 lb) design, functional strap, and tilt stand make it easy for transportationand operation on-the-go (onsite or offsite)
- Rigorously tested for safety and reliability, withCE, CSA and Australia RCM in addition to Fluke quality
- Two-year extended warranty (no-cost, availableafter first-year calibration at any authorized Fluke Biomedical Service Center)
- Global support network delivering prompt service and peace of mind to Fluke Biomedical customers worldwide
The ESA609 Electrical Safety Analyzer is a rugged, portable and easy-to-use analyzer designed for general electrical safety testing. Engineered for on-the-go technicians, the ESA609 requires no training to use and has a rubberized case that allows it to sustain the rigor of transportation, and helps prevent damage when accidentally dropped. Additionally, its functional strap and featherweight design make it one of the most portable electrical safety analyzers in its class. Heavy-duty switches allow users to effortlessly change polarity and configuration of the neutral connection between open and closed, while push-button operation ensures fast transition between tests for complete basic testing in minutes. The ESA609 integrates all functions needed to test medical devices when patient lead testing is notrequired, including: line (mains) voltage, ground wire (protective earth) resistance, equipment current, leakage current and point-to point tests. Versatile to global electrical safety standards of choice, the ESA609 tests to ANSI/ AAMI ES1, NFPA-99, and parts of IEC62353 and IEC60601-1.
- Test current consumption up to 20 A for a diverse set of medical devices
- All parameters needed for basic electrical safety testing: Line (mains) voltage, ground wire (or protective earth) resistance, equipment current, ground wire (earth) leakage, chassis (enclosure) leakage, direct equipment leakage, and point to point leakage and resistance
- Global use: the ESA609 will operate at 120V and 230V
- Rugged: Rubberized case and Ingress Protectionrating of IP30 help prevent damage whendropped
- User-friendly: Quick push-button operation forrapid testing
- Portable: Featherweight (1.5 lb) design, functional strap, and tilt stand make it easy for transportationand operation on-the-go (onsite or offsite)
- Rigorously tested for safety and reliability, withCE, CSA and Australia RCM in addition to Fluke quality
- Global support network delivering prompt service and peace of mind to Fluke Biomedical customers worldwide
- Standards compliance include: ANSI/AAMI ES1, NFPA-99, and parts of IEC62353 and IEC60601-1