CALIBRATION DUAL GAUGE GAS REGULATOR VALVE by Datex-Ohmeda
OEM#: M1006864CALIBRATION DUAL GAUGE GAS REGULATOR VALVE by Datex-Ohmeda
Drop Shipped From GE - Not For Export Out Of US
The Calibration Dual Gauge Gas Regulator Valve is a multiple use accessory. It allows you to control the flow of the various gases that are supplied to the patient and verify that the flow is within the specification limits. During the process, the regulator is inserted to the calibration gas cylinder. Once done, a silicon hose is connected between the regulator and the flow meter. The regulator overflow port is blocked and the regulator should be opened in order to check the flow rate of the flow meter. The allowable flow specification is 260 to 410 ml/min at 2 to 16 bars. If the regulator does not meet the flow specification, the component needs to be replaced.
Additional Features:
- Good corrosion resistance
- Good conductor of heat and electricity
- Spark resistant
- Robust
The Calibration Dual Gauge Gas Regulator Valve is a multiple use accessory. It allows you to control the flow of the various gases that are supplied to the patient and verify that the flow is within the specification limits. During the process, the regulator is inserted to the calibration gas cylinder. Once done, a silicon hose is connected between the regulator and the flow meter. The regulator overflow port is blocked and the regulator should be opened in order to check the flow rate of the flow meter. The allowable flow specification is 260 to 410 ml/min at 2 to 16 bars. If the regulator does not meet the flow specification, the component needs to be replaced.
Additional Features:
- Mindray North America
- GAS MODULE II
- GAS MODULE SE
- GAS MODULE III
- GAS MODULE SE WITH SPIROMETRY
- Datex-Ohmeda
- AISYS
- AISYS CS2
The Calibration Dual Gauge Gas Regulator Valve is a multiple use accessory. It allows you to control the flow of the various gases that are supplied to the patient and verify that the flow is within the specification limits. During the process, the regulator is inserted to the calibration gas cylinder. Once done, a silicon hose is connected between the regulator and the flow meter. The regulator overflow port is blocked and the regulator should be opened in order to check the flow rate of the flow meter. The allowable flow specification is 260 to 410 ml/min at 2 to 16 bars. If the regulator does not meet the flow specification, the component needs to be replaced.
Additional Features:
- Good corrosion resistance
- Good conductor of heat and electricity
- Spark resistant
- Robust
The Calibration Dual Gauge Gas Regulator Valve is a multiple use accessory. It allows you to control the flow of the various gases that are supplied to the patient and verify that the flow is within the specification limits. During the process, the regulator is inserted to the calibration gas cylinder. Once done, a silicon hose is connected between the regulator and the flow meter. The regulator overflow port is blocked and the regulator should be opened in order to check the flow rate of the flow meter. The allowable flow specification is 260 to 410 ml/min at 2 to 16 bars. If the regulator does not meet the flow specification, the component needs to be replaced.
Additional Features:
- Mindray North America
- GAS MODULE II
- GAS MODULE SE
- GAS MODULE III
- GAS MODULE SE WITH SPIROMETRY
- Datex-Ohmeda
- AISYS
- AISYS CS2
The Calibration Dual Gauge Gas Regulator Valve is a multiple use accessory. It allows you to control the flow of the various gases that are supplied to the patient and verify that the flow is within the specification limits. During the process, the regulator is inserted to the calibration gas cylinder. Once done, a silicon hose is connected between the regulator and the flow meter. The regulator overflow port is blocked and the regulator should be opened in order to check the flow rate of the flow meter. The allowable flow specification is 260 to 410 ml/min at 2 to 16 bars. If the regulator does not meet the flow specification, the component needs to be replaced.
Additional Features:
- Good corrosion resistance
- Good conductor of heat and electricity
- Spark resistant
- Robust
The Calibration Dual Gauge Gas Regulator Valve is a multiple use accessory. It allows you to control the flow of the various gases that are supplied to the patient and verify that the flow is within the specification limits. During the process, the regulator is inserted to the calibration gas cylinder. Once done, a silicon hose is connected between the regulator and the flow meter. The regulator overflow port is blocked and the regulator should be opened in order to check the flow rate of the flow meter. The allowable flow specification is 260 to 410 ml/min at 2 to 16 bars. If the regulator does not meet the flow specification, the component needs to be replaced.
Additional Features:
- Mindray North America
- GAS MODULE II
- GAS MODULE SE
- GAS MODULE III
- GAS MODULE SE WITH SPIROMETRY
- Datex-Ohmeda
- AISYS
- AISYS CS2