AS/3 TEMPERATURE TEST SET by Datex-Ohmeda
OEM#: 884515-HELAS/3 TEMPERATURE TEST SET by Datex-Ohmeda
Drop Shipped From GE - Not For Export Out Of US
The AS/3 Temperature Test Set is a device with resistors, connectors, wrapping, stickers and insulation shrinkable tube and it is an essential component of the AS/3 anesthesia monitor. Using the M-ESTP module, it is connected to the monitor in order to observe the status of all the patients in hospital. It guides the plugs in different directions with reasonable force to detect the cord connection. To check the lamp status, calibrate the 25° C and 45° C lamp modes with the TV219 lamp room plugs according to the M-ESTP End-of-Life Guide and the plugs should be tested. The lamp housing flasks are packed in a tubing pouch. This makes a tight node in the lead and another line of the lead so that the knots divide 20cm. Measure the resistance values of the plug-in with the resistance gauge. It is being used in UL LOGIQ Book XP, S&A, UL Voluson P8, MS DASH 4000, UL LOGIQ S8, ARC Airway Gas Module, MIC Giraffe™ OmniBed, MS TRAMRAC, MS PDM, ARC PSM Module, MS CARESCAPE™ Monitor B650, ARC Aisys, ARC S/5 Monitor Anesthesia, ARC Monitor CardioCap 5, ARC Light Monitor and many other applications.
- Made of quality material
- Easy to assemble and disassemble
- Good structural stability
- RoHS compliant
The AS/3 Temperature Test Set is a device with resistors, connectors, wrapping, stickers and insulation shrinkable tube and it is an essential component of the AS/3 anesthesia monitor. Using the M-ESTP module, it is connected to the monitor in order to observe the status of all the patients in hospital. It guides the plugs in different directions with reasonable force to detect the cord connection. To check the lamp status, calibrate the 25° C and 45° C lamp modes with the TV219 lamp room plugs according to the M-ESTP End-of-Life Guide and the plugs should be tested. The lamp housing flasks are packed in a tubing pouch. This makes a tight node in the lead and another line of the lead so that the knots divide 20cm. Measure the resistance values of the plug-in with the resistance gauge. It is being used in UL LOGIQ Book XP, S&A, UL Voluson P8, MS DASH 4000, UL LOGIQ S8, ARC Airway Gas Module, MIC Giraffe™ OmniBed, MS TRAMRAC, MS PDM, ARC PSM Module, MS CARESCAPE™ Monitor B650, ARC Aisys, ARC S/5 Monitor Anesthesia, ARC Monitor CardioCap 5, ARC Light Monitor and many other applications.
The AS/3 Temperature Test Set is a device with resistors, connectors, wrapping, stickers and insulation shrinkable tube and it is an essential component of the AS/3 anesthesia monitor. Using the M-ESTP module, it is connected to the monitor in order to observe the status of all the patients in hospital. It guides the plugs in different directions with reasonable force to detect the cord connection. To check the lamp status, calibrate the 25° C and 45° C lamp modes with the TV219 lamp room plugs according to the M-ESTP End-of-Life Guide and the plugs should be tested. The lamp housing flasks are packed in a tubing pouch. This makes a tight node in the lead and another line of the lead so that the knots divide 20cm. Measure the resistance values of the plug-in with the resistance gauge. It is being used in UL LOGIQ Book XP, S&A, UL Voluson P8, MS DASH 4000, UL LOGIQ S8, ARC Airway Gas Module, MIC Giraffe™ OmniBed, MS TRAMRAC, MS PDM, ARC PSM Module, MS CARESCAPE™ Monitor B650, ARC Aisys, ARC S/5 Monitor Anesthesia, ARC Monitor CardioCap 5, ARC Light Monitor and many other applications.
- Made of quality material
- Easy to assemble and disassemble
- Good structural stability
- RoHS compliant
The AS/3 Temperature Test Set is a device with resistors, connectors, wrapping, stickers and insulation shrinkable tube and it is an essential component of the AS/3 anesthesia monitor. Using the M-ESTP module, it is connected to the monitor in order to observe the status of all the patients in hospital. It guides the plugs in different directions with reasonable force to detect the cord connection. To check the lamp status, calibrate the 25° C and 45° C lamp modes with the TV219 lamp room plugs according to the M-ESTP End-of-Life Guide and the plugs should be tested. The lamp housing flasks are packed in a tubing pouch. This makes a tight node in the lead and another line of the lead so that the knots divide 20cm. Measure the resistance values of the plug-in with the resistance gauge. It is being used in UL LOGIQ Book XP, S&A, UL Voluson P8, MS DASH 4000, UL LOGIQ S8, ARC Airway Gas Module, MIC Giraffe™ OmniBed, MS TRAMRAC, MS PDM, ARC PSM Module, MS CARESCAPE™ Monitor B650, ARC Aisys, ARC S/5 Monitor Anesthesia, ARC Monitor CardioCap 5, ARC Light Monitor and many other applications.
The AS/3 Temperature Test Set is a device with resistors, connectors, wrapping, stickers and insulation shrinkable tube and it is an essential component of the AS/3 anesthesia monitor. Using the M-ESTP module, it is connected to the monitor in order to observe the status of all the patients in hospital. It guides the plugs in different directions with reasonable force to detect the cord connection. To check the lamp status, calibrate the 25° C and 45° C lamp modes with the TV219 lamp room plugs according to the M-ESTP End-of-Life Guide and the plugs should be tested. The lamp housing flasks are packed in a tubing pouch. This makes a tight node in the lead and another line of the lead so that the knots divide 20cm. Measure the resistance values of the plug-in with the resistance gauge. It is being used in UL LOGIQ Book XP, S&A, UL Voluson P8, MS DASH 4000, UL LOGIQ S8, ARC Airway Gas Module, MIC Giraffe™ OmniBed, MS TRAMRAC, MS PDM, ARC PSM Module, MS CARESCAPE™ Monitor B650, ARC Aisys, ARC S/5 Monitor Anesthesia, ARC Monitor CardioCap 5, ARC Light Monitor and many other applications.
- Made of quality material
- Easy to assemble and disassemble
- Good structural stability
- RoHS compliant
The AS/3 Temperature Test Set is a device with resistors, connectors, wrapping, stickers and insulation shrinkable tube and it is an essential component of the AS/3 anesthesia monitor. Using the M-ESTP module, it is connected to the monitor in order to observe the status of all the patients in hospital. It guides the plugs in different directions with reasonable force to detect the cord connection. To check the lamp status, calibrate the 25° C and 45° C lamp modes with the TV219 lamp room plugs according to the M-ESTP End-of-Life Guide and the plugs should be tested. The lamp housing flasks are packed in a tubing pouch. This makes a tight node in the lead and another line of the lead so that the knots divide 20cm. Measure the resistance values of the plug-in with the resistance gauge. It is being used in UL LOGIQ Book XP, S&A, UL Voluson P8, MS DASH 4000, UL LOGIQ S8, ARC Airway Gas Module, MIC Giraffe™ OmniBed, MS TRAMRAC, MS PDM, ARC PSM Module, MS CARESCAPE™ Monitor B650, ARC Aisys, ARC S/5 Monitor Anesthesia, ARC Monitor CardioCap 5, ARC Light Monitor and many other applications.