AIRWAY PRESSURE GAUGE TEST ADAPTER FOR AESTIVA ANESTHESIA MACHINE by Datex-Ohmeda
OEM#: 1406-8206-000AIRWAY PRESSURE GAUGE TEST ADAPTER FOR AESTIVA ANESTHESIA MACHINE by Datex-Ohmeda
Adapter, Airway Pressure Gauge Test Type, For Aestiva Anesthesia Machine, Breathing System
Drop Shipped From GE - Not For Export Out Of US
Airway Pressure Gauge BCG tester is used in breathing systems. The accuracy of the absorber airway pressure gauge can be checked by using a low-pressure test device (digital manometer or test gauge), a low-pressure supply source (typically a syringe) and an airway pressure gauge test adapter. It ensures that the pressure gauge is zero, connects a low-pressure supply source (syringe) to one of the open tubes of the test adapter, connects the test adapter plug to the pressure gauge port on the absorber bulkhead and a low-pressure test device to the remaining open tube of the test adapter. It also adjusts the pressure source to the following pressures as read on the test device and the airway pressure gauge should read within the values indicated. Merely attach a gauge to the O₂ primary regulator test port (On pipeline only machines, attach the gauge to a plugged 6-mm O₂ port at the front of the pneumatic manifold shown at left). This gauge is used in many systems such as MS DASH 4000, ARC Aespire View, MS PDM, ARC Aestiva 3000, MIC Panda™ iRES Warmer, ARC Aespire 7900 etc.,
- Easy to install
- Easy to remove
- Non corrosion part
- Flexible
Airway Pressure Gauge BCG tester is used in breathing systems. The accuracy of the absorber airway pressure gauge can be checked by using a low-pressure test device (digital manometer or test gauge), a low-pressure supply source (typically a syringe) and an airway pressure gauge test adapter. It ensures that the pressure gauge is zero, connects a low-pressure supply source (syringe) to one of the open tubes of the test adapter, connects the test adapter plug to the pressure gauge port on the absorber bulkhead and a low-pressure test device to the remaining open tube of the test adapter. It also adjusts the pressure source to the following pressures as read on the test device and the airway pressure gauge should read within the values indicated. Merely attach a gauge to the O₂ primary regulator test port (On pipeline only machines, attach the gauge to a plugged 6-mm O₂ port at the front of the pneumatic manifold shown at left). This gauge is used in many systems such as MS DASH 4000, ARC Aespire View, MS PDM, ARC Aestiva 3000, MIC Panda™ iRES Warmer, ARC Aespire 7900 etc.,
- Datex-Ohmeda
- AESTIVA
Airway Pressure Gauge BCG tester is used in breathing systems. The accuracy of the absorber airway pressure gauge can be checked by using a low-pressure test device (digital manometer or test gauge), a low-pressure supply source (typically a syringe) and an airway pressure gauge test adapter. It ensures that the pressure gauge is zero, connects a low-pressure supply source (syringe) to one of the open tubes of the test adapter, connects the test adapter plug to the pressure gauge port on the absorber bulkhead and a low-pressure test device to the remaining open tube of the test adapter. It also adjusts the pressure source to the following pressures as read on the test device and the airway pressure gauge should read within the values indicated. Merely attach a gauge to the O₂ primary regulator test port (On pipeline only machines, attach the gauge to a plugged 6-mm O₂ port at the front of the pneumatic manifold shown at left). This gauge is used in many systems such as MS DASH 4000, ARC Aespire View, MS PDM, ARC Aestiva 3000, MIC Panda™ iRES Warmer, ARC Aespire 7900 etc.,
- Easy to install
- Easy to remove
- Non corrosion part
- Flexible
Airway Pressure Gauge BCG tester is used in breathing systems. The accuracy of the absorber airway pressure gauge can be checked by using a low-pressure test device (digital manometer or test gauge), a low-pressure supply source (typically a syringe) and an airway pressure gauge test adapter. It ensures that the pressure gauge is zero, connects a low-pressure supply source (syringe) to one of the open tubes of the test adapter, connects the test adapter plug to the pressure gauge port on the absorber bulkhead and a low-pressure test device to the remaining open tube of the test adapter. It also adjusts the pressure source to the following pressures as read on the test device and the airway pressure gauge should read within the values indicated. Merely attach a gauge to the O₂ primary regulator test port (On pipeline only machines, attach the gauge to a plugged 6-mm O₂ port at the front of the pneumatic manifold shown at left). This gauge is used in many systems such as MS DASH 4000, ARC Aespire View, MS PDM, ARC Aestiva 3000, MIC Panda™ iRES Warmer, ARC Aespire 7900 etc.,
- Datex-Ohmeda
- AESTIVA
Airway Pressure Gauge BCG tester is used in breathing systems. The accuracy of the absorber airway pressure gauge can be checked by using a low-pressure test device (digital manometer or test gauge), a low-pressure supply source (typically a syringe) and an airway pressure gauge test adapter. It ensures that the pressure gauge is zero, connects a low-pressure supply source (syringe) to one of the open tubes of the test adapter, connects the test adapter plug to the pressure gauge port on the absorber bulkhead and a low-pressure test device to the remaining open tube of the test adapter. It also adjusts the pressure source to the following pressures as read on the test device and the airway pressure gauge should read within the values indicated. Merely attach a gauge to the O₂ primary regulator test port (On pipeline only machines, attach the gauge to a plugged 6-mm O₂ port at the front of the pneumatic manifold shown at left). This gauge is used in many systems such as MS DASH 4000, ARC Aespire View, MS PDM, ARC Aestiva 3000, MIC Panda™ iRES Warmer, ARC Aespire 7900 etc.,
- Easy to install
- Easy to remove
- Non corrosion part
- Flexible
Airway Pressure Gauge BCG tester is used in breathing systems. The accuracy of the absorber airway pressure gauge can be checked by using a low-pressure test device (digital manometer or test gauge), a low-pressure supply source (typically a syringe) and an airway pressure gauge test adapter. It ensures that the pressure gauge is zero, connects a low-pressure supply source (syringe) to one of the open tubes of the test adapter, connects the test adapter plug to the pressure gauge port on the absorber bulkhead and a low-pressure test device to the remaining open tube of the test adapter. It also adjusts the pressure source to the following pressures as read on the test device and the airway pressure gauge should read within the values indicated. Merely attach a gauge to the O₂ primary regulator test port (On pipeline only machines, attach the gauge to a plugged 6-mm O₂ port at the front of the pneumatic manifold shown at left). This gauge is used in many systems such as MS DASH 4000, ARC Aespire View, MS PDM, ARC Aestiva 3000, MIC Panda™ iRES Warmer, ARC Aespire 7900 etc.,
- Datex-Ohmeda
- AESTIVA