50A 48 TO 140VAC SPST-NO PHASE ANGLE CONTROL RELAY by CRYDOM
OEM#: MCPC1250C50A 48 TO 140VAC SPST-NO PHASE ANGLE CONTROL RELAY by CRYDOM
Relay, Solid State, Phase Angle Control, 58.8mm Width, 21.8mm Height, 45.3mm Depth, -20 to 80°C Operating Temperature, 50A Current Rating, 48 to 140VAC Load Voltage Rating, SPST-NO Load Contact Form
MCPC Series SSRs use microcontroller based circuitry to vary the firing angle at the output based on a changing input signal. These proportional control SSRs are perfect to control a wide range of resistive loads, with flexible input options.
- Microcontroller based phase angle control SSR
- Ratings from 25 to 90A at 48-530VAC
- Low-voltage, current or potentiometer control
- Output status indicator
- Separate output enable/disable control
- 0-100% Control Range
- For use with a wide range of resistive loads
- Microcontroller based phase angle control SSR
- Ratings from 25 to 90A at 48-530VAC
- Low-voltage, current or potentiometer control
- Output status indicator
- Separate output enable/disable control
- 0-100% Control Range
- For use with a wide range of resistive loads
MCPC Series SSRs use microcontroller based circuitry to vary the firing angle at the output based on a changing input signal. These proportional control SSRs are perfect to control a wide range of resistive loads, with flexible input options.
- Microcontroller based phase angle control SSR
- Ratings from 25 to 90A at 48-530VAC
- Low-voltage, current or potentiometer control
- Output status indicator
- Separate output enable/disable control
- 0-100% Control Range
- For use with a wide range of resistive loads
MCPC Series SSRs use microcontroller based circuitry to vary the firing angle at the output based on a changing input signal. These proportional control SSRs are perfect to control a wide range of resistive loads, with flexible input options.
- Microcontroller based phase angle control SSR
- Ratings from 25 to 90A at 48-530VAC
- Low-voltage, current or potentiometer control
- Output status indicator
- Separate output enable/disable control
- 0-100% Control Range
- For use with a wide range of resistive loads
- Microcontroller based phase angle control SSR
- Ratings from 25 to 90A at 48-530VAC
- Low-voltage, current or potentiometer control
- Output status indicator
- Separate output enable/disable control
- 0-100% Control Range
- For use with a wide range of resistive loads
MCPC Series SSRs use microcontroller based circuitry to vary the firing angle at the output based on a changing input signal. These proportional control SSRs are perfect to control a wide range of resistive loads, with flexible input options.
- Microcontroller based phase angle control SSR
- Ratings from 25 to 90A at 48-530VAC
- Low-voltage, current or potentiometer control
- Output status indicator
- Separate output enable/disable control
- 0-100% Control Range
- For use with a wide range of resistive loads
MCPC Series SSRs use microcontroller based circuitry to vary the firing angle at the output based on a changing input signal. These proportional control SSRs are perfect to control a wide range of resistive loads, with flexible input options.
- Microcontroller based phase angle control SSR
- Ratings from 25 to 90A at 48-530VAC
- Low-voltage, current or potentiometer control
- Output status indicator
- Separate output enable/disable control
- 0-100% Control Range
- For use with a wide range of resistive loads
- Microcontroller based phase angle control SSR
- Ratings from 25 to 90A at 48-530VAC
- Low-voltage, current or potentiometer control
- Output status indicator
- Separate output enable/disable control
- 0-100% Control Range
- For use with a wide range of resistive loads
MCPC Series SSRs use microcontroller based circuitry to vary the firing angle at the output based on a changing input signal. These proportional control SSRs are perfect to control a wide range of resistive loads, with flexible input options.
- Microcontroller based phase angle control SSR
- Ratings from 25 to 90A at 48-530VAC
- Low-voltage, current or potentiometer control
- Output status indicator
- Separate output enable/disable control
- 0-100% Control Range
- For use with a wide range of resistive loads