Departments
Solutions
PRO
Browsing History
Main Menu
Batteries
Biomedical
Cables & Sensors
Computers & Electronics
Facilities & Workspaces
Laboratory
Lighting & Bulbs
Medical Imaging
Minor Equipment
On-Site Service
Repair
Training
Shop by OEM
Shop by Model
Main Menu
Provider
Supplier
Government
Partners
GPOs
Resources
About
Main Menu
About PartsSource PRO
On-Demand Parts
On-Demand Service
Repair & Service Agreements
Main Menu
My Account
Orders
Quotes
Depot Repairs
On-Site Service
Exchanges & Returns
Settings
Main Menu
Month over Month Spend
Prior Rebates
Main Menu
My Lists
Create New List
OEM#: 10X6-33710New OEM Original Outright
10FT CAT5E MOLDED BOOT ETHERNET CROSSOVER CABLE - RED by CableWholesale
Your price:
$5.36 eachEstimated to ship by 04/25 if ordered before 2:30 PM EST
OEM#: 10X6-3371010FT CAT5E MOLDED BOOT ETHERNET CROSSOVER CABLE - RED by CableWholesale
New OEM Original Outright
Your price:
$5.36 each
Estimated to ship by 04/25 if ordered before 2:30 PM EST
Asset Information
Lifetime Warranty
ADD TO LIST
Product Overview
This Cat5e 10 foot red crossover cable is used for networking, data transfer and phone lines. For use from a DSL/cable modem directly to the PC and for a direct link from PC to PC.
This particular cable is a red UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.
- 0.16 MM minimum thickness of Insulation
- 0.17 MM average thickness of Insulation
- 0.45 MM minimum thickness of jacket
- 0.55 MM average thickness of jacket
Features
- Manufacturer: CableWholesale
- Condition: New OEM Original
- Purchase Type: Outright
- Warranty: Other (See Notes)
- Returnable: Yes
Technical Specs
P/N: 10X6-33710 Key Specs
Item
10FT CAT5E MOLDED BOOT ETHERNET CROSSOVER CABLE - RED
OEM
CableWholesale
OEM #
10X6-33710
Condition
New OEM Original
Returnable
Yes
Color
Red
Conductor Color
Blue-White, Blue, Green-White, Green, Orange-White, Orange, Brown-White, Brown
Conductor Construction
0.19 MM
Conductor Diameter
0.58 MM
Conductor Material
Stranded Bare Copper
Connector
Cat5e Male Plug
Connector (Second End)
Cat5e Male Plug
Gauge
24 AWG
Insulation Diameter
0.99 MM
Insulation Material
HD-PE
Jacket Material
Polyvinyl Chloride (PVC)
Length
10 FT
Number of Pairs
4
O.D (Outer Diameter)
5 ± 0.20 MM
Shielded/Unshielded
Unshielded
This Cat5e 10 foot red crossover cable is used for networking, data transfer and phone lines. For use from a DSL/cable modem directly to the PC and for a direct link from PC to PC.
This particular cable is a red UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.
- 0.16 MM minimum thickness of Insulation
- 0.17 MM average thickness of Insulation
- 0.45 MM minimum thickness of jacket
- 0.55 MM average thickness of jacket
Product Overview
This Cat5e 10 foot red crossover cable is used for networking, data transfer and phone lines. For use from a DSL/cable modem directly to the PC and for a direct link from PC to PC.
This particular cable is a red UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.
- 0.16 MM minimum thickness of Insulation
- 0.17 MM average thickness of Insulation
- 0.45 MM minimum thickness of jacket
- 0.55 MM average thickness of jacket
Features
- Manufacturer: CableWholesale
- Condition: New OEM Original
- Purchase Type: Outright
- Warranty: Other (See Notes)
- Returnable: Yes
Technical Specs
P/N: 10X6-33710 Key Specs
Item
10FT CAT5E MOLDED BOOT ETHERNET CROSSOVER CABLE - RED
OEM
CableWholesale
OEM #
10X6-33710
Condition
New OEM Original
Returnable
Yes
Color
Red
Conductor Color
Blue-White, Blue, Green-White, Green, Orange-White, Orange, Brown-White, Brown
Conductor Construction
0.19 MM
Conductor Diameter
0.58 MM
Conductor Material
Stranded Bare Copper
Connector
Cat5e Male Plug
Connector (Second End)
Cat5e Male Plug
Gauge
24 AWG
Insulation Diameter
0.99 MM
Insulation Material
HD-PE
Jacket Material
Polyvinyl Chloride (PVC)
Length
10 FT
Number of Pairs
4
O.D (Outer Diameter)
5 ± 0.20 MM
Shielded/Unshielded
Unshielded
This Cat5e 10 foot red crossover cable is used for networking, data transfer and phone lines. For use from a DSL/cable modem directly to the PC and for a direct link from PC to PC.
This particular cable is a red UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.
- 0.16 MM minimum thickness of Insulation
- 0.17 MM average thickness of Insulation
- 0.45 MM minimum thickness of jacket
- 0.55 MM average thickness of jacket
Product Overview
This Cat5e 10 foot red crossover cable is used for networking, data transfer and phone lines. For use from a DSL/cable modem directly to the PC and for a direct link from PC to PC.
This particular cable is a red UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.
- 0.16 MM minimum thickness of Insulation
- 0.17 MM average thickness of Insulation
- 0.45 MM minimum thickness of jacket
- 0.55 MM average thickness of jacket
Features
- Manufacturer: CableWholesale
- Condition: New OEM Original
- Purchase Type: Outright
- Warranty: Other (See Notes)
- Returnable: Yes
How can we
improve our item listing
?Technical Specs
P/N: 10X6-33710 Key Specs
Item
10FT CAT5E MOLDED BOOT ETHERNET CROSSOVER CABLE - RED
OEM
CableWholesale
OEM #
10X6-33710
Condition
New OEM Original
Returnable
Yes
Color
Red
Conductor Color
Blue-White, Blue, Green-White, Green, Orange-White, Orange, Brown-White, Brown
Conductor Construction
0.19 MM
Conductor Diameter
0.58 MM
Conductor Material
Stranded Bare Copper
Connector
Cat5e Male Plug
Connector (Second End)
Cat5e Male Plug
Gauge
24 AWG
Insulation Diameter
0.99 MM
Insulation Material
HD-PE
Jacket Material
Polyvinyl Chloride (PVC)
Length
10 FT
Number of Pairs
4
O.D (Outer Diameter)
5 ± 0.20 MM
Shielded/Unshielded
Unshielded
This Cat5e 10 foot red crossover cable is used for networking, data transfer and phone lines. For use from a DSL/cable modem directly to the PC and for a direct link from PC to PC.
This particular cable is a red UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.
- 0.16 MM minimum thickness of Insulation
- 0.17 MM average thickness of Insulation
- 0.45 MM minimum thickness of jacket
- 0.55 MM average thickness of jacket